PS200 TEREX Heavy sale in Australia

Designed to produce cleaner material at a faster rate
Specifically designed to work in the recycling industry, its versatility and design enables it to be easily adapted to work in gravel applications
Consists of a trough and two spiral axles running counter to one another with exchangeable blades which intensively mix the feed material
Friction from this process breaks down feed contaminates and allows scrubbed material to be stockpiled

FEATURES & BENEFITS
Two high output electrical motors driving a gear system, which in turn rotates the two counter-rotating axles, which perform the scrubbing action
Interchangeable high tensile blades
The material forms a bed in the hull, preventing wear in the steel trough
The lower bearings are fresh water flushed to prevent wear or damage from small particles
The machines are fitted with an elevated spray bar system, which constantly adds water to the material. This washes the material and encourages lighter particles to float through the water exit
A built in agitation system excites lighter particles, causing them to float and in turn discharge via the water exits on the water discharge side
Full length walkway and steps, which can be fitted on either side of the machine, for ease of access and to view production
4 lifting points firmly attached to the sides of the hull for carriage when required
Large inlet chute with bolt in wear plates
Rubber lined catchboxes and outlet chutes
Versatility and design enables it to be easily adapted to work in gravel applications
Low water consumption
Remote greasing to all bearings
Heavy-duty robust construction ideal for rugged operating environments
High capacity throughput, typically 120 MTPH

SPECIFIC TO ALTERNATE PS 200R
Dewatering screens fitted to either end of the machine
Specifically designed to work in recycling applications to
separate contaminates form saleable material
12×5 dewatering screen removes excess water from material before final screening
6×2 dewatering screen separates lighter particles from the water on which it is floating

SPECIFICATIONS

PS 200

Length (Inc Walkway) 16.8m (54′ 2″)
Width (Inc Walkway) 4.7m (15′ 5″)
Height (Inc Walkway) 5.9m (19′ 4″)
Feed height 5.5m (18′)
Product discharge height (6×2) 1.9m (6′ 2″)
Product discharge height (12×5) 2m (6′ 5″)

PS 200R

Length (Inc Walkway) 15.6m (51′ 2″)
Width (Inc Walkway) 3.8m (12′ 4″)
Height (Inc Walkway) 5.4m (17′ 8″)
Feed height 5.4m (17′ 8″)
Product discharge height 3.2m (10′ 4″)
Waste water discharge height 2.7m (8′ 8″)

ENQUIRE TODAY.

Location

Burpengary, QLD 4505, Australia