700JLGP DEERE Heavy sale in Canada

Enclosed Cab, Air Conditioner, Heater, 10' 9" PAT Blade, Sweeps, Winch, Screens, Hydrostatic, 30" Single Grouser Track Shoes

Year	2006
Serial Number	T0700JX121397
ROPS	Enclosed
Hours	9,145

WARRANTY INCLUDED - 2432 Hours, ROPS Canopy with Heater, 30" Pads, Midwestern Model 540C Draw Works, 20 Foot Boom, Draw Works and Boom Certified, 40,000 LB. Lift Capacity, 6 Way PAT Blade, Powershift Winch is Available - For Rentals in the US - Free Customs & Delivery Within 500 Miles with a 3 Month Rental - We Also have John Deere 700K LGP's Available - Equipped with:
John Deere 6068T Engine
Hydrostatic Drive
ROPS Canopy with Heater
Counter Rotation Steering
30" Single Bar Grouser Pads
Midwestern Model 540C Draw Works
20 Foot Boom
Draw Works and Boom Certified
40,000 LB. Lifting Capacity
Engine Enclosures
John Deere Powershift Winch is Available
6 Way PAT Blade
Drawbar
Mirrors, Lights
Rated at 123 HP.
Approximately 41,500 LBS.

Year	2008
Stock Number	P9888US
ROPS	Open
Hours	2,432
Horse Power	123

WARRANTY INCLUDED, NEW Midwestern M540C Draw Works, 24 Foot Boom, Draw Works and Boom Certified, 40,000 LB. Lifting Capacity, ROPS Canopy, Engine Enclosures, 30" Pads, 6 Way PAT Blade, Powershift Winch is Available - For Rentals in the US - Free Customs & Delivery Within 500 Miles with a 3 Month Rental -
Current Hour Meter Reads: 1836 Hours - Hour Monitor Replaced by John Deere at 2710 Hours. Total Machine Hours: 4542 - Equipped with:
John Deere 6068T Engine
Hydrostatic Drive
ROPS Canopy
Counter Rotation Steering
30" Single Bar Grouser Pads
NEW Midwestern M540C Draw Works
24 Foot Boom
Draw Works and Boom Certified
40,000 LB. Lifting Capacity
Engine Enclosures
John Deere Powershift Winch is Available
6 Way PAT Blade
Drawbar
Mirrors, Lights
Rated at 123 HP.
Approximately 28,300 LBS.

Repair / Condition Report
Following is the list of repairs and servicing completed by Marcel Equipment Limited:
Serviced the engine, transmission and hydraulics. Filters from all three were cut open and all were clean.
Checked the final drive oil levels and they were all good and oils were clean.
Changed the primary and secondary fuel filters.
Changed the outer air filter.
Resealed the fuel filter housing.
Resealed the hydraulic control valve.
Replaced the hydraulic hose at the traction motor.
Replaced the angle cylinder grease line.
NEW pin and bearing installed on the angle cylinder barrel end.
Replaced the cutting edges.
Replaced the blade pins and bearings.
Checked the parking brake.
One of the pumps was not stroking properly so we replaced the transmission control module.
Installed a NEW Midwestern M540C Draw Works with a 24 foot boom.
This unit is now ready to work.

Year	2006
Stock Number	P6467US
ROPS	Open
Hours	4,552
Horse Power	123

WARRANTY INCLUDED - 4652 Hours - NEW Midwestern 540C Draw Works, 24' Boom, Draw Works and Boom Certified, 40,000 LB. Lifting Capacity, NEW 30" Pads, Engine Enclosures, Winch and 6 Way PAT Blade are Available - For Rentals in the US - Free Customs & Delivery Within 500 Miles with a 3 Month Rental - Equipped with:
John Deere 6068T Engine
Hydrostatic Drive
ROPS Canopy
Counter Rotation Steering
NEW 30" Single Bar Grouser Pads
NEW Midwestern Model 540C Draw Works
24 Foot Boom
Draw Works and Boom Certified
40,000 LB Lifting Capacity
Engine Enclosures
John Deere Powershift Winch is Available
6 Way PAT Blade is Available
Drawbar
Mirrors, Lights
Rated at 123 HP.
Approximately 41,500 LBS.

Repair / Condition Report

Upon purchase inspection and servicing, the following was completed:
Engine oil filter was cut open and checked for contaminates, it was clean.
Engine was then serviced.
Engine air filters were replaced.
Transmission and hydraulic filters were cut open and checked for contaminates and they were clean.
Checked the transmission and hydraulic oils and they were also clean.
The following repairs were completed by Marcel Equipment Limited:
Repaired the seat assembly and suspension.
Installed a REBUILT turbo.
Serviced the batteries and cable connections.
Resealed the brake valve.
Repaired the track frame guards.
Installed NEW 30" track shoes.
Resealed the pivot shafts.
Linebored the track frames and installed NEW bearings.
Installed NEW pins and bearings in the tilt cylinder.
Installed NEW pins and bearings in the angle cylinder.
Reshimmed the blade trunnion.
Repaired miscellaneous leaks.
Checked that pressures were set to OEM specifications.
Completed any required cosmetic repairs.
Repaired all of the lights.
Completed other miscellaneous repairs as needed.
Installed and tested a NEW Midwestern Model 540C Draw Works pipelayer attachment.
Sandblasted, primed, painted and detailed this unit in our painting facilities.
This unit is now ready to work.

Year	2006
Stock Number	P5865US
ROPS	Open
Hours	4,652
Horse Power	123

WARRANTY INCLUDED - 4912 Hours, NEW Midwestern 540C Draw Works, 24 Foot Boom, Draw Works and Boom Certified, 40,000 LB. Lift Capacity, ROPS Canopy, 30" Pads with NEW Chains/Idlers/Segments, Engine Enclosures, 6 Way PAT Blade, Winch is Available - For Rentals in the US - Free Customs & Delivery Within 500 Miles with a 3 Month Rental - We also have John Deere 700K LGP's Available -
Equipped with:
John Deere 6068T Engine
Hydrostatic Drive
ROPS Canopy
Counter Rotation Steering
30" Single Bar Grouser Pads with NEW Chains, Idlers and Segments Installed
NEW Midwestern 540C Draw Works
24 Foot Boom
Draw Works and Boom Certified
40,000 LB. Lifting Capacity
Engine Enclosures
John Deere Powershift Winch is Available
6 Way PAT Blade
Drawbar
Mirrors, Lights
Rated at 123 HP.
Approximately 28,300 LBS.

Repair / Condition Report
Upon purchase inspection, we completed the following:
Engine oil filter was cut open and checked for contaminates and it was clean.
We then serviced the engine.
Transmission and hydraulic filters were cut open and checked for contaminates and they were clean.
Changed the hydraulic oil.
Changed the transmission oil.
Checked the transmission, final drive and hydraulic oils and they were all clean.
Installed NEW sprocket segments.
Installed NEW track chains.
Installed NEW idlers.
Repaired any leaks on the machine.
Replaced any hoses as required.
Repaired the seat assembly.
Repaired the lights.
Calibrated the transmission.
Resealed the right side final drive.
Resealed the right side parking brake.
Repaired the track frame guards.
Repaired the radiator shroud and guards.
Installed a NEW bearing and pin on the angle cylinder.
Installed NEW pins and bearings on the tilt cylinder.
Installed a NEW Midwestern Model M540C Draw Works with a 24 foot boom.
This unit is now ready to work.

Year	2008
Stock Number	P5287US
ROPS	Open
Hours	4,912
Horse Power	123
Horsepower	123