2015 LINK-BELT RTC-8065 II
Price:Call

Buy
2015 LINK-BELT RTC-8065 II
Used and New
Description:
Nominal Capacity @ Radius 65USt @ 9' (60mt @ 2.5m)
Standard Boom 38'-115' (11.6-35.0m)
Telescope System Full Power
Attachment - Option 1 35-58' (10.7-17.7m) Bi-Fold
Attachment - Option 2 (1) or (2) 16' (4.9m) Lattice Extensions
Max. Tip Height 211' 7" (64.5m)
Max. Line Pull 16,883 lbs. (75.10kN)
Max. Speed (ft per minute) 459 fpm (139.9m/min)
Fully rigged transport weight of less than 90,000 lbs (40 832.3 kg)
Boom wear pads have Teflon pucks that lubricate the boom sections (no grease)
Four fly options feature four offset positions of 2°, 15°, 30°, and 45°
Next generation operator's cab with improved visibility and ergonomics
Integral air conditioning - optional
4-Link suspension on the rear axle with an optional Hydro-Gas Ride™ system
4-mode steering controlled from the steering wheel
Full-length flat deck with integrated steps and handholds
Large swing out engine hood doors for ease of service
Access ladders and folding guardrails
Standard Boom 38'-115' (11.6-35.0m)
Telescope System Full Power
Attachment - Option 1 35-58' (10.7-17.7m) Bi-Fold
Attachment - Option 2 (1) or (2) 16' (4.9m) Lattice Extensions
Max. Tip Height 211' 7" (64.5m)
Max. Line Pull 16,883 lbs. (75.10kN)
Max. Speed (ft per minute) 459 fpm (139.9m/min)
Fully rigged transport weight of less than 90,000 lbs (40 832.3 kg)
Boom wear pads have Teflon pucks that lubricate the boom sections (no grease)
Four fly options feature four offset positions of 2°, 15°, 30°, and 45°
Next generation operator's cab with improved visibility and ergonomics
Integral air conditioning - optional
4-Link suspension on the rear axle with an optional Hydro-Gas Ride™ system
4-mode steering controlled from the steering wheel
Full-length flat deck with integrated steps and handholds
Large swing out engine hood doors for ease of service
Access ladders and folding guardrails
Information:
Year | 2015 |
Stock Number | LB2388 |
Lift Capacity | 65 tn |
2012 LINK-BELT RTC-8065 II
Price:USD $370,000

Buy
2012 LINK-BELT RTC-8065 II
Used and New
Description:
2012 Link-Belt RTC-8065 S II Less than 2200 hours ready to work sold by owner only one owner Just got its yearly inspection, new hoses in boom.
Caterpillar motor C6.6 Diesel 235HP
1130 Pump Disconnect Switch
2200A Auxilary winch model 2M 2speeds
2220A Cable Tensionner main and auxilary
2680A AC and Diesel Heater
2615 RCL INTERNAL LIGHT BAR
2740B Single Axis control 2 sticks on each side
3010 Auxilary lifting winch
3020 BOOM FLOOD LIGHT
3500B Optional 35-58 ft (10.7-17.7m) two piece fly with offset of 2°, 15°, 30°, and 45°
8500B MAIN WINCH WITH 600 OF ¾" NON-ROTATING WIRE ROPE
8600D AUXILIARY WINCH 600 OF ¾" NON-ROTATING WIRE ROPE
9000B Ball Hook 8 1/2 tons (360 pounds)
9000D 40 TON 4 SHEAVE QUICK-REEVE HOOK BLOCK (720 pounds)
N4M0-225 25 tons block with one pulley quick reeve
LDPD Reach limiter
Extras included: Joy stick controls, oil spill kit, protector for anti-block, 1 30''x40'' box(1200$) 1 pulley box(3000$), - AMBER STROBE LIGHT
Caterpillar motor C6.6 Diesel 235HP
1130 Pump Disconnect Switch
2200A Auxilary winch model 2M 2speeds
2220A Cable Tensionner main and auxilary
2680A AC and Diesel Heater
2615 RCL INTERNAL LIGHT BAR
2740B Single Axis control 2 sticks on each side
3010 Auxilary lifting winch
3020 BOOM FLOOD LIGHT
3500B Optional 35-58 ft (10.7-17.7m) two piece fly with offset of 2°, 15°, 30°, and 45°
8500B MAIN WINCH WITH 600 OF ¾" NON-ROTATING WIRE ROPE
8600D AUXILIARY WINCH 600 OF ¾" NON-ROTATING WIRE ROPE
9000B Ball Hook 8 1/2 tons (360 pounds)
9000D 40 TON 4 SHEAVE QUICK-REEVE HOOK BLOCK (720 pounds)
N4M0-225 25 tons block with one pulley quick reeve
LDPD Reach limiter
Extras included: Joy stick controls, oil spill kit, protector for anti-block, 1 30''x40'' box(1200$) 1 pulley box(3000$), - AMBER STROBE LIGHT
Information:
Year | 2012 |
Location | Honfleur, Quebec, Canada |
Lift Capacity | 130,000 lb |
Drive | 4WD |
Hours | 2,200 |
Serial Number | J9K2-2588 |
Horsepower | 235 |
2011 LINK-BELT RTC-8065 II
Price:USD $441,111
Buy
2011 LINK-BELT RTC-8065 II
Used and New
Description:
65 ton capacity rough terrain crane, 35' to 58' Offset 2-Piece Bifold Jib, Main & Aux. Hoist, Hoist Drum and 40 Ton 4-Sheave Block . Weight Approximately: 90,000 LBS.Cat C6.6 diesel engine, Hydro-Gas rear suspension
air conditioning, 26.5x25 26PR tires, Dual winch, RCL Bar graph, Aux. lifting sheave, 38'-115' 4 section full power boom, 40T 4 sheave Q/R hookblock, 8.5T hook ball.
air conditioning, 26.5x25 26PR tires, Dual winch, RCL Bar graph, Aux. lifting sheave, 38'-115' 4 section full power boom, 40T 4 sheave Q/R hookblock, 8.5T hook ball.
Information:
Year | 2011 |
Location | Edmonton, Alberta, Canada |
Stock Number | 16,886 |
Lift Capacity | 65 lb |
Hours | 4,650 |
2015 LINK-BELT RTC-8065 II
[976767]
2015 LINK-BELT RTC-8065 II
Equipment Sales & Service
Etobicoke, Ontario, Canada
Etobicoke, Ontario, Canada
2012 LINK-BELT RTC-8065 II
[209417]
2012 LINK-BELT RTC-8065 II
Les constructions G. Fortier inc
Honfleur, Quebec, Canada
Honfleur, Quebec, Canada
2011 LINK-BELT RTC-8065 II
[121176]
2011 LINK-BELT RTC-8065 II
GDT TRADING LTD
Edmonton, Alberta, Canada
Edmonton, Alberta, Canada
1