2006 ROADTEC RX700
Price:Call
Buy
2006 ROADTEC RX700
Used and New
Description:
One (1) used 2006 ROADTEC Milling Machine RX-700-3,
Serial number 140, with approximately 5.940 working hours
and the following features:
● Caterpillar C18, 700 HP 6 Cylinder Diesel Engine,
Engine no. WJH01003
● Engine Load Control
● Automatic Traction Control
● Front, Rear, Crab and Coordinated Steer
● Direct Hydraulic Planetary Track Drives
● Foot per Minute Meter
● 1100 Gallon Water Tank with Three Fill Stations
● High Pressure Wash Down System
● Hydraulic Variable Flow Water Pump
● Auto On/Off Spray Water System
● 36” Primary Conveyor
● 36” Secondary Conveyor
● Safety Rails On Secondary Load Out Conveyor
● Self-Cleaning Head and Tail Pulleys
● Left Side / Right Side Full Function Operators Control Stations
● Lighted Instrument Console with Liquid Filled Gauges
● Air Compressor with Reservoir
● Ground Level Controls for Moldboard, End Gates & Elevation
● Remote Grease Fittings Arranged In Zones
● Light Package Consisting of Ten (10) 24 Volt Lights
● Six (6) 24 VDC Power Outlets
● Shock Mounted Operator’s Platform and Console
● Safety Controls Including Emergency Engine Shut-Down,
Cutter Disengage and Engine Shut-Down when Cutter Door is Opened
● Completely Reworked, With Original Roadtec Parts
● New Paintwork
(Original photos on request)
Serial number 140, with approximately 5.940 working hours
and the following features:
● Caterpillar C18, 700 HP 6 Cylinder Diesel Engine,
Engine no. WJH01003
● Engine Load Control
● Automatic Traction Control
● Front, Rear, Crab and Coordinated Steer
● Direct Hydraulic Planetary Track Drives
● Foot per Minute Meter
● 1100 Gallon Water Tank with Three Fill Stations
● High Pressure Wash Down System
● Hydraulic Variable Flow Water Pump
● Auto On/Off Spray Water System
● 36” Primary Conveyor
● 36” Secondary Conveyor
● Safety Rails On Secondary Load Out Conveyor
● Self-Cleaning Head and Tail Pulleys
● Left Side / Right Side Full Function Operators Control Stations
● Lighted Instrument Console with Liquid Filled Gauges
● Air Compressor with Reservoir
● Ground Level Controls for Moldboard, End Gates & Elevation
● Remote Grease Fittings Arranged In Zones
● Light Package Consisting of Ten (10) 24 Volt Lights
● Six (6) 24 VDC Power Outlets
● Shock Mounted Operator’s Platform and Console
● Safety Controls Including Emergency Engine Shut-Down,
Cutter Disengage and Engine Shut-Down when Cutter Door is Opened
● Completely Reworked, With Original Roadtec Parts
● New Paintwork
(Original photos on request)
Information:
| Year | 2006 |
| Serial Number | 140 |
| Hours | 5,940 |
1