1986 KOMATSU D155C-1
Price:USD $195,000
Buy
1986 KOMATSU D155C-1
Used and New
Description:
KOMATSU D155C-1 PIPELAYER
SPECIFICATIONS:
OPERATING WEIGHT 46,350 kg
MAX. LIFTING MOMENT 82 ton.m
FLYWHEEL HORSEPOWER 320 HP
DIMENSIONS:
Overall length 5660 mm
Overall width:
Width counterweight retracted 3760 mm
Shipping width 3230 mm
(boom, frames, counterweight removed)
Overall height:
To top of exhaust pipe (with rain cap) 3725 mm
To highest point, exclusive of exhaust pipe, boom, cabin, frame of right and left side, counterweight (To top of winch) 2845 mm
Truck gauge 2380 mm
Length of truck on ground 3620 mm
Ground contact area 55,020 sq.cm
Ground pressure 0.84 kg/sq.sm
Ground clearance 460 mm
PERFORMANCE:
Travel speed:
Forward 1-st 0 - 3.6 km/h
2-nd 0 - 6.6 km/h
3-rd 0 - 11.2 km/h
Reverse 1-st 0 - 4.4 km/h
2-nd 0 - 7.8 km/h
3-rd 0 - 12.4 km/h
PIPELAYER EQUIPMENT:
Crane:
Boom overhang 1.2 - 6.1 m
Hook speed: (Bare Drum)
Raise:
Low 6.0 m/min
High 13.8 m/min
Lower:
Low 4.8 m/min
High 11.1 m/min
Boom:
Type
Welded box section and be operated by wire rope
Boom equipment
Boom length 6,200mm
Weight 1.670kg
Winch equipment
Type Hydraulically controlled, double drum reversible
Driving system Hydroshift, wet multiple disc clutch type
Brake Hydraulically released spring applied wet multiple disc clutch type
Transmission Wet multiple disc clutch type, in high low range
Winch drum:
Hook (dia x width) 290mm x 340mm
Boom (dia x width) 290mm x 166mm
Wire rope:
Hook (dia x length) 20mm x 95mm
Boom (dia x length) 20mm x 65mm
Weight 3310 kg
Counterweight equipment:
Type Segment plate type, hydraulically controlled
Weight per plate 1530 kg
Cylinder 110kg
No of plate 4
Oil pressure 140 kg/sq.sm
Weight including frame, link Assy, cylinder and weight plate 9130 kg
Safety equipment:
Boom Automatic maximum stopper device
Boom Boom load and radius indicator
Engine:
Model KOMATSU S6D155-4
Type Water cooled, 4-cycle, overhead valve, direct injection type, turbocharged, diesel engine
No of cylinders - bore x stroke 6 - 155mm x 170mm
Piston displacement 19260 cc
Performance
Rated RPM 2000RPM
Flywheel horsepower 320HP
Max.torque 144kg.m/1400RPM
Fuel consumption ratio 180g/HP.h
Fuel System:
Fuel oil According to Komatsu recommendation
Governor Mechanical, all speed control
Lubrication System:
Lubricating method Gear pump, forced lubrication
Filter Full-flow and by-pass type
Oil cooler Water cooled
Cooling system Forced circulation, by centrifugal water pump, reversible fan
Air cleaner
Air intake system from borner side port Dry type with automatic dust ejector and dust indicator
Starting method By electrical starting motor
Starting motor 24V,11KW
Alternator 24V, 50A
Battery 24V (12Vx2)-200Ah
Power transmitting system:
Torque converter:
Type 3 element, single stage and single phase
Cooling method Water cooled
Transmission:
Type Planetary gear and multiple disc clutch, hydraulically actuated, forced lubrication
Gear shift 3 forward nd 3 reverse speeds
Bevel gear Spiral bevel gear
Steering system:
Steering clutch Wet multiple disc, spring loaded, hand operated, Hydraulically actuated
Steering brake Wet, contracting band, foot operated, interconnected with steering clutch, with hydraulic booster
Final drive Spur gear double reduction
Undercarriage:
Suspension Non-oscillating type
No of rollers:
Carrier roller 2, each side
Track roller 8, each side
Shoe:
Type Assembled single grouser
Grouser height 88mm
No of shoes 45, each side
Pitch 228.6mm
Width 760mm
Drawbar
Type Swing type drawbar
Height of drawbar above ground
(Exclusive of grouser height) 675mm
Max. side shift (each side) 295mm
Power take off:
Location Rear of engine
Shift revolutions 1725 RPM at engine 2000RPM
Rotational direction Clockwise (as viewed from drive side)
Coolant and lubricant capacity:
Coolant water 175ltr
Fuel tank 480ltr
Engine 71ltr
Torque converter
Transmission
Bevel gear case
Steering case
185ltr
Final drive case (each side) 55ltr
Counterweight 47ltr
Winch case 125ltr
SPECIFICATIONS:
OPERATING WEIGHT 46,350 kg
MAX. LIFTING MOMENT 82 ton.m
FLYWHEEL HORSEPOWER 320 HP
DIMENSIONS:
Overall length 5660 mm
Overall width:
Width counterweight retracted 3760 mm
Shipping width 3230 mm
(boom, frames, counterweight removed)
Overall height:
To top of exhaust pipe (with rain cap) 3725 mm
To highest point, exclusive of exhaust pipe, boom, cabin, frame of right and left side, counterweight (To top of winch) 2845 mm
Truck gauge 2380 mm
Length of truck on ground 3620 mm
Ground contact area 55,020 sq.cm
Ground pressure 0.84 kg/sq.sm
Ground clearance 460 mm
PERFORMANCE:
Travel speed:
Forward 1-st 0 - 3.6 km/h
2-nd 0 - 6.6 km/h
3-rd 0 - 11.2 km/h
Reverse 1-st 0 - 4.4 km/h
2-nd 0 - 7.8 km/h
3-rd 0 - 12.4 km/h
PIPELAYER EQUIPMENT:
Crane:
Boom overhang 1.2 - 6.1 m
Hook speed: (Bare Drum)
Raise:
Low 6.0 m/min
High 13.8 m/min
Lower:
Low 4.8 m/min
High 11.1 m/min
Boom:
Type
Welded box section and be operated by wire rope
Boom equipment
Boom length 6,200mm
Weight 1.670kg
Winch equipment
Type Hydraulically controlled, double drum reversible
Driving system Hydroshift, wet multiple disc clutch type
Brake Hydraulically released spring applied wet multiple disc clutch type
Transmission Wet multiple disc clutch type, in high low range
Winch drum:
Hook (dia x width) 290mm x 340mm
Boom (dia x width) 290mm x 166mm
Wire rope:
Hook (dia x length) 20mm x 95mm
Boom (dia x length) 20mm x 65mm
Weight 3310 kg
Counterweight equipment:
Type Segment plate type, hydraulically controlled
Weight per plate 1530 kg
Cylinder 110kg
No of plate 4
Oil pressure 140 kg/sq.sm
Weight including frame, link Assy, cylinder and weight plate 9130 kg
Safety equipment:
Boom Automatic maximum stopper device
Boom Boom load and radius indicator
Engine:
Model KOMATSU S6D155-4
Type Water cooled, 4-cycle, overhead valve, direct injection type, turbocharged, diesel engine
No of cylinders - bore x stroke 6 - 155mm x 170mm
Piston displacement 19260 cc
Performance
Rated RPM 2000RPM
Flywheel horsepower 320HP
Max.torque 144kg.m/1400RPM
Fuel consumption ratio 180g/HP.h
Fuel System:
Fuel oil According to Komatsu recommendation
Governor Mechanical, all speed control
Lubrication System:
Lubricating method Gear pump, forced lubrication
Filter Full-flow and by-pass type
Oil cooler Water cooled
Cooling system Forced circulation, by centrifugal water pump, reversible fan
Air cleaner
Air intake system from borner side port Dry type with automatic dust ejector and dust indicator
Starting method By electrical starting motor
Starting motor 24V,11KW
Alternator 24V, 50A
Battery 24V (12Vx2)-200Ah
Power transmitting system:
Torque converter:
Type 3 element, single stage and single phase
Cooling method Water cooled
Transmission:
Type Planetary gear and multiple disc clutch, hydraulically actuated, forced lubrication
Gear shift 3 forward nd 3 reverse speeds
Bevel gear Spiral bevel gear
Steering system:
Steering clutch Wet multiple disc, spring loaded, hand operated, Hydraulically actuated
Steering brake Wet, contracting band, foot operated, interconnected with steering clutch, with hydraulic booster
Final drive Spur gear double reduction
Undercarriage:
Suspension Non-oscillating type
No of rollers:
Carrier roller 2, each side
Track roller 8, each side
Shoe:
Type Assembled single grouser
Grouser height 88mm
No of shoes 45, each side
Pitch 228.6mm
Width 760mm
Drawbar
Type Swing type drawbar
Height of drawbar above ground
(Exclusive of grouser height) 675mm
Max. side shift (each side) 295mm
Power take off:
Location Rear of engine
Shift revolutions 1725 RPM at engine 2000RPM
Rotational direction Clockwise (as viewed from drive side)
Coolant and lubricant capacity:
Coolant water 175ltr
Fuel tank 480ltr
Engine 71ltr
Torque converter
Transmission
Bevel gear case
Steering case
185ltr
Final drive case (each side) 55ltr
Counterweight 47ltr
Winch case 125ltr
Information:
| Year | 1986 |
| Location | Danville, California |
| ROPS | Enclosed |
| Serial Number | 23934 |
1986 KOMATSU D155C-1
Price:USD $195,000
Buy
1986 KOMATSU D155C-1
Used and New
Description:
KOMATSU D155C-1 PIPELAYER
SPECIFICATIONS:
OPERATING WEIGHT 46,350 kg
MAX. LIFTING MOMENT 82 ton.m
FLYWHEEL HORSEPOWER 320 HP
DIMENSIONS:
Overall length 5660 mm
Overall width:
Width counterweight retracted 3760 mm
Shipping width 3230 mm
(boom, frames, counterweight removed)
Overall height:
To top of exhaust pipe (with rain cap) 3725 mm
To highest point, exclusive of exhaust pipe, boom, cabin, frame of right and left side, counterweight (To top of winch) 2845 mm
Truck gauge 2380 mm
Length of truck on ground 3620 mm
Ground contact area 55,020 sq.cm
Ground pressure 0.84 kg/sq.sm
Ground clearance 460 mm
PERFORMANCE:
Travel speed:
Forward 1-st 0 - 3.6 km/h
2-nd 0 - 6.6 km/h
3-rd 0 - 11.2 km/h
Reverse 1-st 0 - 4.4 km/h
2-nd 0 - 7.8 km/h
3-rd 0 - 12.4 km/h
PIPELAYER EQUIPMENT:
Crane:
Boom overhang 1.2 - 6.1 m
Hook speed: (Bare Drum)
Raise:
Low 6.0 m/min
High 13.8 m/min
Lower:
Low 4.8 m/min
High 11.1 m/min
Boom:
Type
Welded box section and be operated by wire rope
Boom equipment
Boom length 6,200mm
Weight 1.670kg
Winch equipment
Type Hydraulically controlled, double drum reversible
Driving system Hydroshift, wet multiple disc clutch type
Brake Hydraulically released spring applied wet multiple disc clutch type
Transmission Wet multiple disc clutch type, in high low range
Winch drum:
Hook (dia x width) 290mm x 340mm
Boom (dia x width) 290mm x 166mm
Wire rope:
Hook (dia x length) 20mm x 95mm
Boom (dia x length) 20mm x 65mm
Weight 3310 kg
Counterweight equipment:
Type Segment plate type, hydraulically controlled
Weight per plate 1530 kg
Cylinder 110kg
No of plate 4
Oil pressure 140 kg/sq.sm
Weight including frame, link Assy, cylinder and weight plate 9130 kg
Safety equipment:
Boom Automatic maximum stopper device
Boom Boom load and radius indicator
Engine:
Model KOMATSU S6D155-4
Type Water cooled, 4-cycle, overhead valve, direct injection type, turbocharged, diesel engine
No of cylinders - bore x stroke 6 - 155mm x 170mm
Piston displacement 19260 cc
Performance
Rated RPM 2000RPM
Flywheel horsepower 320HP
Max.torque 144kg.m/1400RPM
Fuel consumption ratio 180g/HP.h
Fuel System:
Fuel oil According to Komatsu recommendation
Governor Mechanical, all speed control
Lubrication System:
Lubricating method Gear pump, forced lubrication
Filter Full-flow and by-pass type
Oil cooler Water cooled
Cooling system Forced circulation, by centrifugal water pump, reversible fan
Air cleaner
Air intake system from borner side port Dry type with automatic dust ejector and dust indicator
Starting method By electrical starting motor
Starting motor 24V,11KW
Alternator 24V, 50A
Battery 24V (12Vx2)-200Ah
Power transmitting system:
Torque converter:
Type 3 element, single stage and single phase
Cooling method Water cooled
Transmission:
Type Planetary gear and multiple disc clutch, hydraulically actuated, forced lubrication
Gear shift 3 forward nd 3 reverse speeds
Bevel gear Spiral bevel gear
Steering system:
Steering clutch Wet multiple disc, spring loaded, hand operated, Hydraulically actuated
Steering brake Wet, contracting band, foot operated, interconnected with steering clutch, with hydraulic booster
Final drive Spur gear double reduction
Undercarriage:
Suspension Non-oscillating type
No of rollers:
Carrier roller 2, each side
Track roller 8, each side
Shoe:
Type Assembled single grouser
Grouser height 88mm
No of shoes 45, each side
Pitch 228.6mm
Width 760mm
Drawbar
Type Swing type drawbar
Height of drawbar above ground
(Exclusive of grouser height) 675mm
Max. side shift (each side) 295mm
Power take off:
Location Rear of engine
Shift revolutions 1725 RPM at engine 2000RPM
Rotational direction Clockwise (as viewed from drive side)
Coolant and lubricant capacity:
Coolant water 175ltr
Fuel tank 480ltr
Engine 71ltr
Torque converter
Transmission
Bevel gear case
Steering case
185ltr
Final drive case (each side) 55ltr
Counterweight 47ltr
Winch case 125ltr
SPECIFICATIONS:
OPERATING WEIGHT 46,350 kg
MAX. LIFTING MOMENT 82 ton.m
FLYWHEEL HORSEPOWER 320 HP
DIMENSIONS:
Overall length 5660 mm
Overall width:
Width counterweight retracted 3760 mm
Shipping width 3230 mm
(boom, frames, counterweight removed)
Overall height:
To top of exhaust pipe (with rain cap) 3725 mm
To highest point, exclusive of exhaust pipe, boom, cabin, frame of right and left side, counterweight (To top of winch) 2845 mm
Truck gauge 2380 mm
Length of truck on ground 3620 mm
Ground contact area 55,020 sq.cm
Ground pressure 0.84 kg/sq.sm
Ground clearance 460 mm
PERFORMANCE:
Travel speed:
Forward 1-st 0 - 3.6 km/h
2-nd 0 - 6.6 km/h
3-rd 0 - 11.2 km/h
Reverse 1-st 0 - 4.4 km/h
2-nd 0 - 7.8 km/h
3-rd 0 - 12.4 km/h
PIPELAYER EQUIPMENT:
Crane:
Boom overhang 1.2 - 6.1 m
Hook speed: (Bare Drum)
Raise:
Low 6.0 m/min
High 13.8 m/min
Lower:
Low 4.8 m/min
High 11.1 m/min
Boom:
Type
Welded box section and be operated by wire rope
Boom equipment
Boom length 6,200mm
Weight 1.670kg
Winch equipment
Type Hydraulically controlled, double drum reversible
Driving system Hydroshift, wet multiple disc clutch type
Brake Hydraulically released spring applied wet multiple disc clutch type
Transmission Wet multiple disc clutch type, in high low range
Winch drum:
Hook (dia x width) 290mm x 340mm
Boom (dia x width) 290mm x 166mm
Wire rope:
Hook (dia x length) 20mm x 95mm
Boom (dia x length) 20mm x 65mm
Weight 3310 kg
Counterweight equipment:
Type Segment plate type, hydraulically controlled
Weight per plate 1530 kg
Cylinder 110kg
No of plate 4
Oil pressure 140 kg/sq.sm
Weight including frame, link Assy, cylinder and weight plate 9130 kg
Safety equipment:
Boom Automatic maximum stopper device
Boom Boom load and radius indicator
Engine:
Model KOMATSU S6D155-4
Type Water cooled, 4-cycle, overhead valve, direct injection type, turbocharged, diesel engine
No of cylinders - bore x stroke 6 - 155mm x 170mm
Piston displacement 19260 cc
Performance
Rated RPM 2000RPM
Flywheel horsepower 320HP
Max.torque 144kg.m/1400RPM
Fuel consumption ratio 180g/HP.h
Fuel System:
Fuel oil According to Komatsu recommendation
Governor Mechanical, all speed control
Lubrication System:
Lubricating method Gear pump, forced lubrication
Filter Full-flow and by-pass type
Oil cooler Water cooled
Cooling system Forced circulation, by centrifugal water pump, reversible fan
Air cleaner
Air intake system from borner side port Dry type with automatic dust ejector and dust indicator
Starting method By electrical starting motor
Starting motor 24V,11KW
Alternator 24V, 50A
Battery 24V (12Vx2)-200Ah
Power transmitting system:
Torque converter:
Type 3 element, single stage and single phase
Cooling method Water cooled
Transmission:
Type Planetary gear and multiple disc clutch, hydraulically actuated, forced lubrication
Gear shift 3 forward nd 3 reverse speeds
Bevel gear Spiral bevel gear
Steering system:
Steering clutch Wet multiple disc, spring loaded, hand operated, Hydraulically actuated
Steering brake Wet, contracting band, foot operated, interconnected with steering clutch, with hydraulic booster
Final drive Spur gear double reduction
Undercarriage:
Suspension Non-oscillating type
No of rollers:
Carrier roller 2, each side
Track roller 8, each side
Shoe:
Type Assembled single grouser
Grouser height 88mm
No of shoes 45, each side
Pitch 228.6mm
Width 760mm
Drawbar
Type Swing type drawbar
Height of drawbar above ground
(Exclusive of grouser height) 675mm
Max. side shift (each side) 295mm
Power take off:
Location Rear of engine
Shift revolutions 1725 RPM at engine 2000RPM
Rotational direction Clockwise (as viewed from drive side)
Coolant and lubricant capacity:
Coolant water 175ltr
Fuel tank 480ltr
Engine 71ltr
Torque converter
Transmission
Bevel gear case
Steering case
185ltr
Final drive case (each side) 55ltr
Counterweight 47ltr
Winch case 125ltr
Information:
| Year | 1986 |
| Location | Danville, California |
| ROPS | Enclosed |
| Serial Number | 23941 |
1