30102C MANITEX Heavy sale in Colorado

Features
-30 Ton (27,3 mton) Capacity
-4-Section 100' (30,1 m)
-2-Section, 26' (7,9 m) to 46' (14 m) Jib
-2-Section, 26' (7,9 m) Fixed Jib
-110.6' (33,7 m) Maximum Main Boom Tip Heights
-157' (47,8 m) Maximum Tip Height with extension
-23.3' 6" (6,8 m) A-frame Outriggers Fully Extended
-14.6' (4,4 m) Out-and-down Rear Stabilizers
-2-Speed Planetary Hoist with Grooved Drum and Negative Draft Flange
-Wired Load Moment Indicator with crane function cut-offs for overload protection
-Externally wired anti-two block system
-Rugged, Weatherproof Electrical System with Circuit Status LEDs
-Removable Boom Rest
-System Pressure Gauge
-Clamp-On Mounting
-Aeroquip STC (Snap to Connect) Hydraulic Fittings

Year	2017
Serial Number	251422
Stock Number	PO39255
Lift Capacity	30 tn

Manitex 30102C mounted to 2007 Sterling LT7501 chassis

STANDARD FEATURES
2-speed Hoist w/ Grooved Drum
3-Load Sheave Quick Reeve Boom Head
335' (102.11m) 9/16" (14.3mm) Rotation Resistant Wire Rope
Dual Operator Control Stations
Radio Anti-Two Block w/ Lockout
Boom Hoist Cylinder
3-Section Hydraulic Pump
System Pressure Gauge
372° Non Continuous Rotation
Removable Boom Rest
Engine Start/Stop
Operator's Service/Parts Manuals
Boom Length and Angle Indicators
Mechanical Throttle
Foot Throttle
Signal Horn
Bubble Level
Beverage Cup Holders
4 Section Telescopic Boom
Subframe for 22' (6.71 m) Bed
70 Gallon (265 liter) Reservoir w/Suction Strainer & Ball Valve
Pedestal, Turret, Rotation Bearing & Swing System
Load Moment Indicator w/Internal length Cable- Audio/visual Capacity Alert w/ Shutoff
Hermetically sealed Printed Circuit Board Electrical System w/LED Circuit Status Indicators
Audible Outrigger/Stabilizer Motion Alarm
A-frame Link Type Front Outriggers (22' 4" Spread Width)
Out and Down Rear Stabilizers (13 '7" Spread)

INCLUDED ITEMS
Basic Machine w/102’ Four-Section Telescopic Boom
21' flatbed body with diamondette steel floor
Standard Mount Installation LMI
35 Ton, 3 Sheave Hook Block for 2 – 4 Part Line
5 Ton overhaul ball
2 Piece – 26’ to 46’ jib
Front Center Stabilizer (Requires Additional Mounting Charge)
Mounting--Front Center Stabilizer
Control valve for operation of single stabilizer, Required w/FBS

TRUCK
Sterling LT7500 Single Steer Tandem Rear Chassis
Cat C-7 300HP, 860 LB./FT. Torque, Diesel Engine
Cruise Control
Eaton RT 8608L Transmission, 9 Speed
Meritor MFS-20-133A, 20K Front Axle
Meritor RT-40-145, 40K Tandem Rear Axle
Hendrickson RT 403, 40,000 Spring, Rear Suspension
4.11 Rear Axle Ratio
Wheel Diff Locks
Front Tires: 425/650R 22.5 Tires on Steel Disc Wheels
Rear Tires: 11.R 22.5 Tires (Qty 8) on Steel Disc Wheels
Dual 60 US Gallon Aluminum Fuel Tanks
Heat/Defrost/Air Conditioning
Air Suspension Drivers Seat
Fixed passenger seat
AM/FM/Radio

Year	2007
Serial Number	146227
Stock Number	30-017
Lift Capacity	30 tn
Horsepower	300

Manitex 30102C mounted to 2007 Sterling LT7501 chassis

STANDARD FEATURES
2-speed Hoist w/ Grooved Drum
3-Load Sheave Quick Reeve Boom Head
335' (102.11m) 9/16" (14.3mm) Rotation Resistant Wire Rope
Dual Operator Control Stations
Radio Anti-Two Block w/ Lockout
Boom Hoist Cylinder
3-Section Hydraulic Pump
System Pressure Gauge
372° Non Continuous Rotation
Removable Boom Rest
Engine Start/Stop
Operator's Service/Parts Manuals
Boom Length and Angle Indicators
Mechanical Throttle
Foot Throttle
Signal Horn
Bubble Level
Beverage Cup Holders
4 Section Telescopic Boom
Subframe for 22' (6.71 m) Bed
70 Gallon (265 liter) Reservoir w/Suction Strainer & Ball Valve
Pedestal, Turret, Rotation Bearing & Swing System
Load Moment Indicator w/Internal length Cable- Audio/visual Capacity Alert w/ Shutoff
Hermetically sealed Printed Circuit Board Electrical System w/LED Circuit Status Indicators
Audible Outrigger/Stabilizer Motion Alarm
A-frame Link Type Front Outriggers (22' 4" Spread Width)
Out and Down Rear Stabilizers (13 '7" Spread)

INCLUDED ITEMS
Basic Machine w/102’ Four-Section Telescopic Boom
21' flatbed body with diamondette steel floor
Standard Mount Installation LMI
35 Ton, 3 Sheave Hook Block for 2 – 4 Part Line
5 Ton overhaul ball
2 Piece – 26’ to 46’ jib
Front Center Stabilizer (Requires Additional Mounting Charge)
Mounting--Front Center Stabilizer
Control valve for operation of single stabilizer, Required w/FBS

TRUCK
Sterling LT7500 Single Steer Tandem Rear Chassis
Cat C-7 300HP, 860 LB./FT. Torque, Diesel Engine
Cruise Control
Eaton RT 8608L Transmission, 9 Speed
Meritor MFS-20-133A, 20K Front Axle
Meritor RT-40-145, 40K Tandem Rear Axle
Hendrickson RT 403, 40,000 Spring, Rear Suspension
4.11 Rear Axle Ratio
Wheel Diff Locks
Front Tires: 425/650R 22.5 Tires on Steel Disc Wheels
Rear Tires: 11.R 22.5 Tires (Qty 8) on Steel Disc Wheels
Dual 60 US Gallon Aluminum Fuel Tanks
Heat/Defrost/Air Conditioning
Air Suspension Drivers Seat
Fixed passenger seat
AM/FM/Radio

Year	2007
Serial Number	146226
Stock Number	30-016
Lift Capacity	30 tn
Horsepower	300

Manitex 30102C mounted to 2013 Freightliner M2 106 chassis

Features
30 Ton (27,3 mton) Capacity
4-Section 102' (31,0 m)
112.6' (34,3 m) Maximum Main Boom Tip Heights
23.3' 6" (6,8 m) A-frame Outriggers Fully Extended
14.6' (4,4 m) Out-and-down Rear Stabilizers
2-Speed Planetary Hoist with Grooved Drum and Negative Draft Flange
Wired Load Moment Indicator with crane function cut-offs for overload protection
Externally wired anti-two block system
Rugged, Weatherproof Electrical System with Circuit Status LEDs
Removable Boom Rest
System Pressure Gauge
Clamp-On Mounting
Aeroquip STC (Snap to Connect) Hydraulic Fittings
Manitex UPTime Comprehensive Support

Specs

BOOM
Inverted T-cross section, 4-section telescoping type, extended and retracted proportionally by a double-acting hydraulic cylinder and cable-crowd system. Easily replaceable and adjustable high-density nylon slide pads.
30102 – 4-Section 30' 6" (9,3 m) to 102' (31 m). 2-section, 26' (7,9 m) to 46' (14,0 m) jib.
Quick Reeve Boom Point – Two high-density nylon load sheaves mounted on heavy-duty roller bearings. Two removable pin-type rope guards.
Boom Elevation – Double-acting hydraulic cylinder. Working range from 9Þ below horizontal to 80.6Þ above.
Load Hook – 7-ton (4,6 mton) capacity hook with heavy-duty swivel and weight is provided for single-line operation.

HOIST
Maximum theoretical line speed 247 fpm (75,3 mpm). Maximum theoretical bottom-layer line pull 11,500 lb (2 227 kg). Two-speed planetary reducer. Wet multi-disc internal brake is spring-applied, pressure-released.
Wire Rope – 335' (102,1 m) of 9/16" (14,3 mm) rotation resistant type.

SWING SYSTEM
Externally mounted, double-reduction planetary driven by hydraulic motor. Maximum theoretical swing speed 1.5 rpm. Spring-applied, pressure-released parking brake. Ball-bearing swing circle with external gear. 372Þ non-continuous rotation.

OUTRIGGERS
A-frame link type with double-acting hydraulic cylinders operated independently for precise leveling. Bubble level located near outrigger controls.

MOUNTING
Pedestal and subframe are mounted to chassis by threaded rods and clamp plates. No welding, drilling, or bolting to truck frame is required.
Subframe – Torsionally resistant, rigid 4-plate design. Mounted under crane full length of truck frame.
Rear Underride Protection – Supplied on factory-mounted cranes. Fabricated structure mounted under rear of bed. Complies with Bureau Motor Carrier Safety Standard 393.86.
Boom Rest – Heavy-duty fabrication. Easily removed to simplify loading and unloading truck deck.

CONTROL SYSTEM
Dual operator platforms are equipped with four single-lever crane controls arranged to ANSI B30.5 standards. Fully proportional control valves and system pressure gauge. Each station also includes outrigger and stabilizer controls, engine start/stop, foot throttle, signal horn, boom-angle indicator, bubble levels, beverage container, load chart, and range diagram.

HYDRAULICS
Hydraulic System – A 3-section gear pump direct-mounted to power take-off on truck transmission provides 32 gpm (133 lpm) to the hoist, 8 gpm (30 lpm) to the swing circuit and 21 gpm to the other crane functions. 70-gallon baffled reservoir includes suction ball valve with strainer two 25-micron filters in the return line. Use of SAE O-ring and face seal O-ring hydraulic fittings throughout system. Aeroquip STC (Snap- to-Connect) on all hoses up to 1" virtually eliminates leaks.
Hydraulic Cylinders – All load-holding cylinders are equipped with integral holding valves.

WARNING SYSTEMS
Load Moment Indicator – CAN bus system maximizes expansion capabilities. Senses boom hoist cylinder pressure, boom length and boom angle. Audio-visual warning indicated overload conditions and overload shutoff feature prevents continuing overload. Operator can access all relative crane configuration and load conditions via display at the operator station. Internal boom length cable.
Radio Anti-Two-Block System – Audible warning and shutoff functions prevent hook from contacting boom point. Wireless system minimizes down time typically associated with damaged cables in wired systems.
Back-Up Alarm – Supplied on factory-mounted cranes, electronic audible motion alarm activated when truck transmission is in reverse gear.

GENERAL
Electrical – State-of-the-art, weather-resistant components throughout. Hermetically sealed power in relays. Enclosure includes power in relays and circuit status LEDs. Designed to withstand high pressure washing and varying climates.
Design/Welding – Design conforms to ANSI B30.5. Welding conforms to AWS D1.1. Tested to SAE 1063 and SAE 765.
Manuals – Operator, service and parts manuals depict correct crane operation, maintenance procedures and parts listing.

Year	2013
Serial Number	211894
Stock Number	30-032
Lift Capacity	30 tn

Features
-30 Ton (27,3 mton) Capacity
-4-Section 100' (30,1 m)
-2-Section, 26' (7,9 m) to 46' (14 m) Jib
-2-Section, 26' (7,9 m) Fixed Jib
-110.6' (33,7 m) Maximum Main Boom Tip Heights
-157' (47,8 m) Maximum Tip Height with extension
-23.3' 6" (6,8 m) A-frame Outriggers Fully Extended
-14.6' (4,4 m) Out-and-down Rear Stabilizers
-2-Speed Planetary Hoist with Grooved Drum and Negative Draft Flange
-Wired Load Moment Indicator with crane function cut-offs for overload protection
-Externally wired anti-two block system
-Rugged, Weatherproof Electrical System with Circuit Status LEDs
-Removable Boom Rest
-System Pressure Gauge
-Clamp-On Mounting
-Aeroquip STC (Snap to Connect) Hydraulic Fittings

Year	2018
Serial Number	251716
Stock Number	PO39256
Lift Capacity	30 tn