CROSSOVER8000 TEREX Heavy sale in Colorado

Specifications:
Capacity class: 80 US-tons
Main boom length: 126 ft
Maximum tip height (with extension): 190 ft
Maximum boom length: 182 ft
Maximum counterweight: 15,000 lb
Overall length: 48.5 ft

Features:
126 ft fully synchronous telescopic boom
80 USt maximum lifting capacity
X-pattern front outrigger design eliminates front jack requirement
Rated capacity indicator with work area definition

Year	2018
Serial Number	N/A
Stock Number	PO38548
Lift Capacity	80 tn
Hours	0

CraneWorks has a new Terex XO-8000 in stock for immediate delivery. This crane has a 80 ton capacity and a four section, 126’ proportional boom. The optional 2 stage (33’-57’) jib will give this machine a max. tip height of 190’. Crane overload protection system is Greer Element RCI and the A2B is hardwired. The dual winches are 2-speed and are spooled with 3/4”rotation resistant wire rope with each having a maximum bottom layer line pull of 13,800 lbs. A 60 ton, 5-sheave block is included. The crane is stabilized by Terex X-Pattern out and down outriggers. A front stabilizer is not required for 360° operation. The tilting cab has both heat & AC . This unit is equipped with the optional 12,000 LB. heavy counterweight package for additional lifting capacity. A cold weather package consisting of Immersion hydraulic tank heater (crane), engine block heater, engine oil pan heater and heated fuel/water separator and Arctic Fox fuel tank heaters completes the package.

This crane is mounted on a new, 2015 Kenworth T-800 tandem steer tridem drive chassis with Cummins ISX-550HP diesel engine with Interbrake. Power is transmitted through an Allison 4500 RDS automatic transmission. Front axle is 40K and the rear axles are rated at 69K. Traction is maximized with diff locks on all three driving axles. Ride is cushioned by Neway ADZ-378, air ride suspension. Front tires are 425/65R 22.5 flotation tires mounted on aluminum wheels. Rear tires are 445/65R 22.5 mounted on aluminum wheels. This provides maximum traction in slippery or off-road conditions. Kenworth’s Diamond interior with XM Radio, GPS and Virtual Gauges is included.

Please contact CraneWorks for additional information, pictures and pricing.

Serial Number	120461
Stock Number	PO-95917

This Terex Crossover 8000 has a 80 ton capacity and a four section, 126’ proportional boom. The optional 2 stage (33’-57’) jib will give this machine a maximum tip height of 190’. Crane overload protection system is Greer Element RCI and the A2B is hardwired. The dual winches are 2-speed and are spooled with 3/4” rotation resistant wire rope, with each having a maximum bottom layer line pull of 13,800 lbs. A 60 ton, 5-sheave block is included. The crane is stabilized by Terex X-Pattern out and down outriggers. A front stabilizer is not required for 360° operation. The tilting cab has both heat and AC.

This crane is mounted on a new 2018 Kenworth T-800 chassis. Please contact CraneWorks for additional information and pricing.

Year	2018
Serial Number	1050118507
Stock Number	PO39340
Lift Capacity	80 tn

This Terex Crossover 8000 has a 80 ton capacity and a four section, 126’ proportional boom. The optional 2 stage (33’-57’) jib will give this machine a maximum tip height of 190’. Crane overload protection system is Greer Element RCI and the A2B is hardwired. The dual winches are 2-speed and are spooled with 3/4” rotation resistant wire rope, with each having a maximum bottom layer line pull of 13,800 lbs. A 60 ton, 5-sheave block is included. The crane is stabilized by Terex X-Pattern out and down outriggers. A front stabilizer is not required for 360° operation. The tilting cab has both heat and AC.

This crane is mounted on a new 2018 Kenworth T-800 chassis. Please contact CraneWorks for additional information and pricing.

Year	2018
Serial Number	105118905
Stock Number	PO39341
Lift Capacity	80 tn

This Terex Crossover 8000 has a 80 ton capacity and a four section, 126’ proportional boom. The optional 2 stage (33’-57’) jib will give this machine a maximum tip height of 190’. Crane overload protection system is Greer Element RCI and the A2B is hardwired. The dual winches are 2-speed and are spooled with 3/4” rotation resistant wire rope, with each having a maximum bottom layer line pull of 13,800 lbs. A 60 ton, 5-sheave block is included. The crane is stabilized by Terex X-Pattern out and down outriggers. A front stabilizer is not required for 360° operation. The tilting cab has both heat and AC.

This crane is mounted on a new 2018 Kenworth T-800 chassis. Please contact CraneWorks for additional information and pricing.

Year	2018
Serial Number	105118967
Stock Number	PO39342
Lift Capacity	80 tn