2017 ASHLAND I140XL2
Price:Call
Buy
2017 ASHLAND I140XL2
Used and New
Description:
New I-140XL2 Ashland Dirt Scraper = 14yds - Straight center blade - New design - Ready to move! Perfect for cleaning out waterways, terraces, etc.
Call for pricing!
Located in La Plata, MO
Call for pricing!
Located in La Plata, MO
Information:
| Year | 2017 |
| Serial Number | 24186 |
2017 ASHLAND I140XL2
Price:Call
Buy
2017 ASHLAND I140XL2
Used and New
Description:
Sequence and Counter Balance Valve, Width Of Cut: 97.5”, Depth of cut: 8", ...Call
Information:
| Year | 2017 |
| Stock Number | WG-140- XL2 |
| Capacity | 14 yd3 |
| ROPS | None |
2016 ASHLAND I140XL2
Price:Call
Buy
2016 ASHLAND I140XL2
Used and New
Description:
This Ashland has lots to offer.
Pole:
Extending the Pole length increases clearance between the tractor and Front Section on tight turns. And all Ashland Pole hitches are made by inserting a steel thrust block into the neck of a steel, “C” shaped plate. The yoke system and thrust collar are then placed in their correct positions to be welded 360 degrees around. This design gives Ashland scrapers a full range of motion from the hitch and maximum potential pull-through to the back side of the Pole or the spindle base plate.
Socket System:
The new Control Ball & Socket System creates a perfect link between Gooseneck and Dolly-Pole. After 60 years of Ashland’s cast socket halves, we have developed an adjustable socket system. Machined from a solid billet of steel, it guarantees a precision fit at all times while improving the greasing characteristics of the system. As the joint between the ball & socket begins to wear, simply remove shims as needed to tighten the fit on the 4.5″ ball.
Front Section:
With a long paneled Gooseneck design, the 140XL2 has a greater range of motion for the scrapers dolly wheels to articulate and adapt to harsh site conditions. The longer Front Section positions the dolly wheels further away from the “fall zone” (77” away), so the wheels do not interfere with the machines ejection process. All supported by industrial welded 5″ x 16″ vertically mounted lift cylinders.
Front Pipe:
Round structures, such as the heavy wall pipe that Ashland uses in its Front Section, handle torsional loads (twisting loads) much better than square or rectangle tubing. With rounded pipe, the stress of your load is displaced around the entire circumference of the structure — with any other style, stress is amplified in the corners and seams. Concentrated stress can cause the tubing to fail in these areas, making our Front Section pipe a superior design.
Apron:
Fabricated from heavy, high grade steel the 140 Apron mates perfectly with the machine. We have also increased clearance between the Frame and Arm. Adding grease-thru pins for better lubrication and an Apron viewing window to see material while loading. With improved safety features, you will experience peace of mind while performing maintenance.
Call the Keast Team to find out more about this new scraper. We can offer you financing, a full service shop, and delivery anywhere!!!
Pole:
Extending the Pole length increases clearance between the tractor and Front Section on tight turns. And all Ashland Pole hitches are made by inserting a steel thrust block into the neck of a steel, “C” shaped plate. The yoke system and thrust collar are then placed in their correct positions to be welded 360 degrees around. This design gives Ashland scrapers a full range of motion from the hitch and maximum potential pull-through to the back side of the Pole or the spindle base plate.
Socket System:
The new Control Ball & Socket System creates a perfect link between Gooseneck and Dolly-Pole. After 60 years of Ashland’s cast socket halves, we have developed an adjustable socket system. Machined from a solid billet of steel, it guarantees a precision fit at all times while improving the greasing characteristics of the system. As the joint between the ball & socket begins to wear, simply remove shims as needed to tighten the fit on the 4.5″ ball.
Front Section:
With a long paneled Gooseneck design, the 140XL2 has a greater range of motion for the scrapers dolly wheels to articulate and adapt to harsh site conditions. The longer Front Section positions the dolly wheels further away from the “fall zone” (77” away), so the wheels do not interfere with the machines ejection process. All supported by industrial welded 5″ x 16″ vertically mounted lift cylinders.
Front Pipe:
Round structures, such as the heavy wall pipe that Ashland uses in its Front Section, handle torsional loads (twisting loads) much better than square or rectangle tubing. With rounded pipe, the stress of your load is displaced around the entire circumference of the structure — with any other style, stress is amplified in the corners and seams. Concentrated stress can cause the tubing to fail in these areas, making our Front Section pipe a superior design.
Apron:
Fabricated from heavy, high grade steel the 140 Apron mates perfectly with the machine. We have also increased clearance between the Frame and Arm. Adding grease-thru pins for better lubrication and an Apron viewing window to see material while loading. With improved safety features, you will experience peace of mind while performing maintenance.
Call the Keast Team to find out more about this new scraper. We can offer you financing, a full service shop, and delivery anywhere!!!
Information:
| Year | 2016 |
| Location | Henderson, Iowa |
| ROPS | None |
2016 ASHLAND I140XL2
Price:Call
Buy
2016 ASHLAND I140XL2
Used and New
Description:
Brand New 2016, 14yd - I-140XL2 Ashland Scraper - Comes with Serrated blade - Call For Pricing!
Information:
| Year | 2016 |
| Location | Humboldt, Iowa |
| ROPS | None |
2017 ASHLAND I140XL2
Price:Call
Buy
2017 ASHLAND I140XL2
Used and New
Description:
Sequence and Counter Balance Valve, Width Of Cut: 97.5”, Depth of cut: 8" ....Includes serrated blade lease price $6,375/yr
Information:
| Year | 2017 |
| Location | Independence, Iowa |
| Stock Number | WG-140- XL2 |
| Capacity | 14 yd3 |
| ROPS | None |
1