2006 CAT D6R LGP
2006 CAT D6R LGP
Price:USD $125,000
Buy
2006 CAT D6R LGP
Used and New
Description:
2006 Cat D6R LGP, 4,565 total hrs, 2,934 Idle hrs recorded, Erops, A/C, Diff Steer, Sweeps, Good Undercarriage, Low Hour Pipeline machine. Ready to go.
Read the details -
· WRG serial number
· 4,565 Total Frame Hours, ECM verified
· 2,934 hours where at Idle, ECM verified
· Only 1,631 actual operating hours on this machine
· Original condition, original paint
· Enclosed Cab, A/C, Heat
· Engine Enclosures
· Diff Steer
· Straight Blade w/ tilt
· Sweeps
· Rear Drawbar
· Good Undercarriage, see full report below.
· Cat C9 Accert Engine, 210 HP
· 48,500 Pounds, operating weight
· 13’6” blade width
· Sandblast and Paint service, available for this machine, for additional $7,500
Undercarriage measures as follows (Based on Cat spec 120% being New):
Cat OEM Undercarriage on this machine- part # 234-9699
· Rail/Chain height measure 69% Remaining, Cat part # 8E-7406
· Links/Bushings on rails measure 76% Remaining
· Pads/Grousers – 47% Remaining, 36” wide Track pads
· Sprockets – 102% remaining
· Front Idlers – 104% Remaining
· Rear Idlers – 100% Remaining
· Bottom Rollers – 93% Remaining average
This is an extremely low hour, Pipeline machine. The machine is straight, and original. Good solid, original condition machine all the way around. Hours are original and verified thru the ECM download.
This machine is currently getting an extensive work order, including a full Cat TA2 technical inspection of all component pressures to cat spec, we are also servicing all oils and filters on machine, along with several other procedures. This machine will be ready to go. Please call or email for additional information that we can email you –
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, jjscheckel.com, Priced to sell!
Read the details -
· WRG serial number
· 4,565 Total Frame Hours, ECM verified
· 2,934 hours where at Idle, ECM verified
· Only 1,631 actual operating hours on this machine
· Original condition, original paint
· Enclosed Cab, A/C, Heat
· Engine Enclosures
· Diff Steer
· Straight Blade w/ tilt
· Sweeps
· Rear Drawbar
· Good Undercarriage, see full report below.
· Cat C9 Accert Engine, 210 HP
· 48,500 Pounds, operating weight
· 13’6” blade width
· Sandblast and Paint service, available for this machine, for additional $7,500
Undercarriage measures as follows (Based on Cat spec 120% being New):
Cat OEM Undercarriage on this machine- part # 234-9699
· Rail/Chain height measure 69% Remaining, Cat part # 8E-7406
· Links/Bushings on rails measure 76% Remaining
· Pads/Grousers – 47% Remaining, 36” wide Track pads
· Sprockets – 102% remaining
· Front Idlers – 104% Remaining
· Rear Idlers – 100% Remaining
· Bottom Rollers – 93% Remaining average
This is an extremely low hour, Pipeline machine. The machine is straight, and original. Good solid, original condition machine all the way around. Hours are original and verified thru the ECM download.
This machine is currently getting an extensive work order, including a full Cat TA2 technical inspection of all component pressures to cat spec, we are also servicing all oils and filters on machine, along with several other procedures. This machine will be ready to go. Please call or email for additional information that we can email you –
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, jjscheckel.com, Priced to sell!
Information:
Year | 2006 |
Serial Number | WRG |
Stock Number | A02274 |
ROPS | Enclosed |
Hours | 4,565 |
Horsepower | 210 |
2006 CAT D6R LGP
Price:USD $115,000
Buy
2006 CAT D6R LGP
Used and New
Description:
2006 Cat D6R LGP, 7,328 total hrs, 5,167 Idle hrs recorded, Erops, A/C, Diff Steer, Sweeps, Good Undercarriage, Low Hour Pipeline machine. Ready to go. Read the details -
· WRG serial number
· 7,328 Total Frame Hours, ECM verified
· 5,167 hours where at Idle, ECM verified
· Only 2,161 actual operating hours on this machine
· Original condition, original paint
· Enclosed Cab, A/C, Heat
· Engine Enclosures
· Diff Steer
· Straight Blade w/ tilt
· Sweeps
· Rear Drawbar
· Good Undercarriage, see full report below.
· Cat C9 Accert Engine, 210 HP
· 48,500 Pounds, operating weight
· 13’6” blade width
· Sandblast and Paint service, available for this machine, for additional $7,500
Undercarriage measures as follows: (Based on Cat spec 120% being New)
Cat OEM Undercarriage on this machine
· Rail/Chain height measure 52% Remaining, Cat part # 234-9699
· Links/Bushings on rails measure 70% Remaining
· Pads/Grousers – 30% Remaining, 36” wide Track pads
· Sprockets – 103% remaining
· Front Idlers – 115% Remaining
· Rear Idlers – 120% Remaining
· Bottom Rollers – 74% Remaining
This is an extremely low hour, Pipeline machine. The machine is straight, and original. Good solid, original condition machine all the way around. Hours are original and verified thru the ECM download. A lot of Idle Time.
This machine is currently getting an extensive work order, including a full Cat TA2 technical inspection of all component pressures to cat spec, we are also servicing all oils and filters on machine, along with several other pre sale procedures. This machine will be ready to go. Please call or email for additional information that we can email you.
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, jjscheckel.com, Priced to sell! $115,000
· WRG serial number
· 7,328 Total Frame Hours, ECM verified
· 5,167 hours where at Idle, ECM verified
· Only 2,161 actual operating hours on this machine
· Original condition, original paint
· Enclosed Cab, A/C, Heat
· Engine Enclosures
· Diff Steer
· Straight Blade w/ tilt
· Sweeps
· Rear Drawbar
· Good Undercarriage, see full report below.
· Cat C9 Accert Engine, 210 HP
· 48,500 Pounds, operating weight
· 13’6” blade width
· Sandblast and Paint service, available for this machine, for additional $7,500
Undercarriage measures as follows: (Based on Cat spec 120% being New)
Cat OEM Undercarriage on this machine
· Rail/Chain height measure 52% Remaining, Cat part # 234-9699
· Links/Bushings on rails measure 70% Remaining
· Pads/Grousers – 30% Remaining, 36” wide Track pads
· Sprockets – 103% remaining
· Front Idlers – 115% Remaining
· Rear Idlers – 120% Remaining
· Bottom Rollers – 74% Remaining
This is an extremely low hour, Pipeline machine. The machine is straight, and original. Good solid, original condition machine all the way around. Hours are original and verified thru the ECM download. A lot of Idle Time.
This machine is currently getting an extensive work order, including a full Cat TA2 technical inspection of all component pressures to cat spec, we are also servicing all oils and filters on machine, along with several other pre sale procedures. This machine will be ready to go. Please call or email for additional information that we can email you.
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, jjscheckel.com, Priced to sell! $115,000
Information:
Year | 2006 |
Serial Number | WRG |
Stock Number | A02275 |
ROPS | Enclosed |
Hours | 7,328 |
Horsepower | 210 |
2003 CAT D6R LGP
Price:USD $65,000
Buy
2003 CAT D6R LGP
Used and New
Description:
2003 Cat D6R LGP, 11,300 total hrs, 3,300 Idle hrs recorded, Erops, A/C, Diff Steer, Good Undercarriage, Local owner operator trade In. Ready to go.
Read the details -
· ADE00177 serial number
· 11,300 Total Frame Hours, ECM verified
· 3,300 hours where at Idle, ECM verified
· Only 8,000 actual operating hours on this machine
· Original condition, original paint
· Enclosed Cab, A/C, Heat
· Engine Enclosures
· Diff Steer
· Straight Blade w/ tilt
· Good Undercarriage, see full report below
· Cat C9 Accert Engine, 210 HP
· 48,500 Pounds operating weight
· 13’6” blade width
· Sandblast and Paint service available for this machine, for additional $7,500
Undercarriage measures as follows (Based on Cat spec 120% being New)
Cat OEM Undercarriage on this machine
· Rail/Chain height measure 85% Remaining, Cat part #8E-7406
· Links/Bushings on rails measure 68% Remaining
· Pads/Grousers – 25% Remaining, 36” wide Track pads
· Sprockets – 75% remaining
· Front Idlers – 60% Remaining
· Rear Idlers – 66% Remaining
This is a local owner/operator Trade In, machine is straight, paint is not the best, but all is original. Good solid, original condition machine all the way around. Hours are original and verified, along with the 3,300 idle hours. Owner kept good maintenance.
This machine is currently going thru work order and getting all oils and filters serviced, we are also performing a TA2 test on all the major component pressures and settings to Cat Spec. Full detailed pictures will be available along with the ECM download and TA2 testing report.
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, jjscheckel.com, Priced to sell!
Read the details -
· ADE00177 serial number
· 11,300 Total Frame Hours, ECM verified
· 3,300 hours where at Idle, ECM verified
· Only 8,000 actual operating hours on this machine
· Original condition, original paint
· Enclosed Cab, A/C, Heat
· Engine Enclosures
· Diff Steer
· Straight Blade w/ tilt
· Good Undercarriage, see full report below
· Cat C9 Accert Engine, 210 HP
· 48,500 Pounds operating weight
· 13’6” blade width
· Sandblast and Paint service available for this machine, for additional $7,500
Undercarriage measures as follows (Based on Cat spec 120% being New)
Cat OEM Undercarriage on this machine
· Rail/Chain height measure 85% Remaining, Cat part #8E-7406
· Links/Bushings on rails measure 68% Remaining
· Pads/Grousers – 25% Remaining, 36” wide Track pads
· Sprockets – 75% remaining
· Front Idlers – 60% Remaining
· Rear Idlers – 66% Remaining
This is a local owner/operator Trade In, machine is straight, paint is not the best, but all is original. Good solid, original condition machine all the way around. Hours are original and verified, along with the 3,300 idle hours. Owner kept good maintenance.
This machine is currently going thru work order and getting all oils and filters serviced, we are also performing a TA2 test on all the major component pressures and settings to Cat Spec. Full detailed pictures will be available along with the ECM download and TA2 testing report.
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, jjscheckel.com, Priced to sell!
Information:
Year | 2003 |
Location | Bellevue, Iowa |
Stock Number | A02096 |
ROPS | Enclosed |
Hours | 11,300 |
Serial Number | ADE00177 |
Horsepower | 210 |
1