1987 CAT D9N
Price:USD $59,000
Buy
1987 CAT D9N
Used and New
Description:
1987 Cat D9N, A02119, 1JD Series, 11,300 hours, Low profile Open Cab, Lever Steer, SU Blade w/ tilt, Cwt Drawbar, Auxiliary Hydraulics, Nice Local Tractor. All original. Read the Details!
· 1JD serial number prefix
· 11,300 Frame Hours
· Low Profile Open Canopy
· Lever Steer
· SU Blade with Tilt
· Rear Cwt Drawbar (Rear Rippers available at extra cost)
· Full UC measurements below
· Cat 3408 Engine, 370 HP
· 94,000 Pounds operating weight
· We Have Multiple Rippers and Rear attachments in stock at extra cost. Also have good used UC set for this machine in stock.
Undercarriage measurements (Based on Cat spec 120% being New):
· Rail/Chains Link height measure 48% Remaining
· Links/Bushings on rails measure 65% Remaining
· Pads/Grousers – 52% Remaining, 30” wide – some broken pads
· Sprockets – 26% Remaining
· Front Idlers, measure 72% Remaining
· Rear Idlers measure – 76% Remaining
· Bottom Rollers, Average – 60% Remaining
This machine is pretty clean, Local Cat Dealer Trade In, No major leaks, No known faults. Good solid machine all the way around. Blade face is very good, track frames are solid, machine is straight, hours are believed to be original.
This machine has 30” wide track pads, it has 5 track pads on the left side, with broke off edges, and 10 pads on the right side with broke off edges.
This machine is not going thru our shop, selling wholesale just as it arrived. We would recommend general cleaning, replacing some track pads, and servicing of all oils and filters.
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, jjscheckel.com, Priced to sell Fast!
· 1JD serial number prefix
· 11,300 Frame Hours
· Low Profile Open Canopy
· Lever Steer
· SU Blade with Tilt
· Rear Cwt Drawbar (Rear Rippers available at extra cost)
· Full UC measurements below
· Cat 3408 Engine, 370 HP
· 94,000 Pounds operating weight
· We Have Multiple Rippers and Rear attachments in stock at extra cost. Also have good used UC set for this machine in stock.
Undercarriage measurements (Based on Cat spec 120% being New):
· Rail/Chains Link height measure 48% Remaining
· Links/Bushings on rails measure 65% Remaining
· Pads/Grousers – 52% Remaining, 30” wide – some broken pads
· Sprockets – 26% Remaining
· Front Idlers, measure 72% Remaining
· Rear Idlers measure – 76% Remaining
· Bottom Rollers, Average – 60% Remaining
This machine is pretty clean, Local Cat Dealer Trade In, No major leaks, No known faults. Good solid machine all the way around. Blade face is very good, track frames are solid, machine is straight, hours are believed to be original.
This machine has 30” wide track pads, it has 5 track pads on the left side, with broke off edges, and 10 pads on the right side with broke off edges.
This machine is not going thru our shop, selling wholesale just as it arrived. We would recommend general cleaning, replacing some track pads, and servicing of all oils and filters.
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, jjscheckel.com, Priced to sell Fast!
Information:
| Year | 1987 |
| Location | Bellevue, Iowa |
| Stock Number | A02119 |
| ROPS | Open |
| Hours | 11,300 |
| Serial Number | 1JD |
| Horsepower | 370 |
Part catalog for D9N Caterpillar
1