TF300B ASTEC Heavy sale in Louisiana

Manufacturer ........ Briggs & Stratton
Model .................................. Vanguard
Type ....................................... Gasoline
Cylinders ............................ 2 (V-twin)
Bore/Stroke ................... 2.97” x 2.76”
(7.5 x 7 cm)
Displacement............... 38 in3 (627 cc)
Horsepower................ 18.5 (13.8 kW)
@ 3100 rpm
Max. torque.......... 32 lb·ft (43.3 N·m)
@ 2400 rpm
DRIVELINE
Hydraulic drive with final drives
sealed and enclosed in oil. Infinitely
variable speed. Direct-drive clutches
and multi-disc steering brakes.
Two speed ranges, transport and
working. Hydraulic fixed displacement
pump with variable flow from
valve to fixed displacement motor
on final drive.
Travel/work speeds
Transport ....... 1.8 mph (2.2 km/h)
Working ................. 0 to 30 ft./min.
(9.1 m/min.)
OPERATORENVIRONMENT
Electric start and shut-down
Hand throttle and choke
Single lever forward/reverse
Dual steering and brake levers
Variable speed creep control
Trencher chain clutch lever
Low noise, low vibration engine
Optional backfill blade controls
Operator noise level .............. 86.7 dB
UNDERCARRIAGE
High-flotation tracks avialable in
cleat-type steel or rubber tracks
Track rollers.............................. Sealed
Track ground area ................... 730 in2
(4710 cm2)
Ground pressure
w/backfill blade................... 3.1 psi
w/o backkfill blade ............. 2.6 psi
HYDRAULIC SYSTEM
Ground drive pump
@ 3100 rpm........................ 11.3 gpm
(42.7 l/min)
Relief valve setting................. 2550 psi
(17 580 kPa)
Boom anti-drift valve............ Standard
Filtration.................. 10 micron spin-on
ELECTRICAL SYSTEM
Battery................... 12 volts, 340 CCA
Alternator.................. 12 volt, 16 amp
Gauges
Ammeter
Digital tachometer
Digital hourmeter
Low oil shutdown system (engine)
Neutral start safety logic
Seat interlock system
SERVICE CAPACITIES
Fuel tank..................... 5.5 gal (20.8 L)
Engine oil
w/ filter change....... 1.75 qt (1.7 L)
Hydraulic reservoir ... 7.0 gal (26.5 L)
Transmission................ 1.0 qt (0.95 L)
Satellite gearbox.......... 0.25 qt (0.25 L)
TRENCHER
Boom mounting options
Centerline for (4”-12”) cut width
Offset 2” for (14”-16”) cut width
Flush digger
Centerline of flush digging
attachment to outside edge
of track ......................... 5” (12.7 cm)
Chainline speed .............. 338 ft/min.
(103 m/min.)
Spoil removal ........................... Auger
Digging depth and width —
Sprocket boom
Dig depth............ to 45” (114 cm)
Dig width ...... 4-16” (10-40.6 cm)
Channel boom
Dig depth............ to 45” (114 cm)
Dig width ...... 4-16” (10-40.6 cm)
BACKFILL B LADE
Angle (left/right)......... 40° each way
Dual lever controls
Blade lift/lower float position

Year	2004
Serial Number	TF300B57494
Stock Number	57494