36X70 STRAIGHTLINE Heavy sale in Minnesota

Two are designed to ride piggy back on the top of third conveyor for over road transport

• Frame on piggy back conveyors: 4 x 4 x 5/16” Chords with 2 x 2 x 1/4” Lattice members – with 3 x 3 x 3/16” angle recessed in frame for troughing
idlers
• Frame on transport conveyor 4 x 4 x 5/16” Chords with 2 x 2 x 1/4” Lattice members – with 3 x 3 x 3/16 angle recessed in frame for troughing idlers
• Truss: 30” Deep
• Adjustable height under carriage – manual pin adjustment
• Note: Top conveyor to raise to 16ft
• Axle: Single – 8 bolt hubs - single 11.00-22.5 tires (on two piggy back conveyors)
• Axle: Tandem with duals – 10 bolt hubs – dual 11.00-22.5R tires (on transport conveyor)
• Air brakes and light package on transport conveyor
• Head pulley: 16” x 38” C.F. – 3/8” H.B. lagging – 3 7/16” shaft
• Tail pulley: 14” x 38” Wing style – 2-15/16” shaft
• Troughing idlers: CEMA C – 5” rollers on 4’ centers
• Return idlers: CEMA C – 5” rollers on 10’ centers
• Gear Reducer: Dodge size 5 with backstop
• Motor: 20HP 1800 230/460/3ph Toshiba
• Electrical switch gear / Inter locking
• Electrical cord hooks on one side
• Bearings: Dodge 2 bolt pillow block 3 7/16” on head pulleys and 2 15/16” on tail pulleys
• Take-ups: Dodge wide slot
• Conveyor belt: 36”- 3 ply 3/1 cover
• 350FPM / 750TPH
• Belt scraper: By Superior
• 5’ receiving hopper with extra idlers at load point
• Hitch: Fifth wheel and tow eye (on transport conveyor – tow eye on piggy back conveyors)
• Guarding: Tail pulley and V-belts
• Sandblasted: Frame (1) Coat urethane primer (1) Coat finished urethane.

Year

2017

• Frame: 3 x 3 x ¼” angle chords with 2 x 2 x 3/16” angle lattice members with 4 x 3 x ¼” extra cord
• Truss: 36” Deep
• Dolly legs mounted to ¼” plate for reinforcement
• Adjustable height under carriage – (Raise to 16ft under head pulley)
• Axle: Single w/single 11.00-22.5 Radial tires (No Brakes)
• Light package
• Head pulley: 16” x 38” C.F. – 3/8” H.B. lagging – 2-15/16” shaft
• Tail pulley: 14” x 38” wing style – 2-15/16” shaft
• Troughing idlers: CEMA B – 5” rollers on 4’ centers
• Return idlers: CEMA B – 5” rollers on 10’ centers
• Gear Reducer: Dodge size 5
• Motor: 20HP 1800RPM 230/460/3ph Toshiba
• Bearings: Dodge S2000 on head pulley shaft & tail pulley shaft
• Take-ups: SLI screw type
• Conveyor belt: 36”- 3 ply 3/16” x 1/16” cover
• 600TPH
• Belt scraper: Superior
• 5’ Flared receiving hopper with extra idlers at load point
• Hitch: 5th wheel king pin and tow eye
• Guarding: Tail pulley and V-belts
• Sandblasted: Frame
• (1) Coat urethane primer (1) Coat urethane finished.

Year

2017