2012 KPI-JCI 2148-50LP
Price:Call
Buy
2012 KPI-JCI 2148-50LP
Used and New
Description:
2148-50LP LOW PRO TRUCK UNLOADER
DRIVE OVER HOPPER
Suitable for end dumps or belly dumps
Grate – 12’ x 6’ outside dimension
Flat bar with 6” openings
Overflow material is swept into the hopper with hydraulic pivoting side walls
Bulkhead height – requires a 36” high earthen ramp
Adjustable discharge gate is provided
UNLOADING CONVEYOR
Frame – 48” x 50’ long c/c with 8” channel frame
Discharge height – to bottom of discharge hood – 7’10” – 10’9”
Drive Assembly – head end drive for 210 FPM belt speed
Capacity – 1000 TPH of 100 pcf material; max material size of 2”
Motors – Dual 15 HP (30 HP total) electric, 1800 RPM, TEFC 3/60/460
Reducers – Class I Dodge MTA4 shaft mount
Backstops – Internal type in reducer
Pulleys
Head Pulley – 20” grooved rubber lagged, Dodge bearings
Tail Pulley – 18” steel wing, Dodge bearings
Take-Up – screw type
Idlers – CEMA “C” 5” diameter, steel roll, sealed for life ball bearings
Load Area Idlers – 20 degree picking style impact, closed space under hopper
Troughing Idlers – 20 degree on 3.5’ spacing
Return Idlers – rubber disc on 10’ spacing
Belt – Grade 2, 3 ply, 330 PIW, 3/16” x 1/16” vulcanized splice
Receiving Trough – under hopper
UNDERCARRIAGE
Heavy duty frame
Single axle with dual (4) 11:00 x 22.5 tires, air brakes, lights and mud flaps
Fifth wheel hitch
Manual landing jacks
10 HP electric / hydraulic power pack to control the pivoting side walls
ELECTRICAL
NEMA 4 enclosure with main disconnect mounted on the side of conveyor; All starters and wiring to motors. Start / stop pushbuttons for main conveyor motor and hydraulic power pack; LESS power cable – 460 volt, 3 phase, 60 hertz power required
OPERATOR’S PLATFORM
Located on the discharge side of the truck unloader; Allows operator to control the sweep of the side walls; Also allows visibility downstream
PAINT – Two part urethane primer, two part urethane topcoat – Factory standard color(s).
OPTIONS:
Belt Cleaner – Martin Discharge Hood
Wireless remote, to operate the hydraulic swinging side walls
Hydraulic undercarriage lift cylinder
Hydraulic landing jacks, in lieu of manual jacks (jacks only, does not include power)
Diesel/Genset; JD6068-173 Tier III engine with 100 KW generator
Control panel to include a receptacle to power a 33-36136LP or 33-36150 Super stacker from the diesel / genset. Power cable with plug provided by customer.
DRIVE OVER HOPPER
Suitable for end dumps or belly dumps
Grate – 12’ x 6’ outside dimension
Flat bar with 6” openings
Overflow material is swept into the hopper with hydraulic pivoting side walls
Bulkhead height – requires a 36” high earthen ramp
Adjustable discharge gate is provided
UNLOADING CONVEYOR
Frame – 48” x 50’ long c/c with 8” channel frame
Discharge height – to bottom of discharge hood – 7’10” – 10’9”
Drive Assembly – head end drive for 210 FPM belt speed
Capacity – 1000 TPH of 100 pcf material; max material size of 2”
Motors – Dual 15 HP (30 HP total) electric, 1800 RPM, TEFC 3/60/460
Reducers – Class I Dodge MTA4 shaft mount
Backstops – Internal type in reducer
Pulleys
Head Pulley – 20” grooved rubber lagged, Dodge bearings
Tail Pulley – 18” steel wing, Dodge bearings
Take-Up – screw type
Idlers – CEMA “C” 5” diameter, steel roll, sealed for life ball bearings
Load Area Idlers – 20 degree picking style impact, closed space under hopper
Troughing Idlers – 20 degree on 3.5’ spacing
Return Idlers – rubber disc on 10’ spacing
Belt – Grade 2, 3 ply, 330 PIW, 3/16” x 1/16” vulcanized splice
Receiving Trough – under hopper
UNDERCARRIAGE
Heavy duty frame
Single axle with dual (4) 11:00 x 22.5 tires, air brakes, lights and mud flaps
Fifth wheel hitch
Manual landing jacks
10 HP electric / hydraulic power pack to control the pivoting side walls
ELECTRICAL
NEMA 4 enclosure with main disconnect mounted on the side of conveyor; All starters and wiring to motors. Start / stop pushbuttons for main conveyor motor and hydraulic power pack; LESS power cable – 460 volt, 3 phase, 60 hertz power required
OPERATOR’S PLATFORM
Located on the discharge side of the truck unloader; Allows operator to control the sweep of the side walls; Also allows visibility downstream
PAINT – Two part urethane primer, two part urethane topcoat – Factory standard color(s).
OPTIONS:
Belt Cleaner – Martin Discharge Hood
Wireless remote, to operate the hydraulic swinging side walls
Hydraulic undercarriage lift cylinder
Hydraulic landing jacks, in lieu of manual jacks (jacks only, does not include power)
Diesel/Genset; JD6068-173 Tier III engine with 100 KW generator
Control panel to include a receptacle to power a 33-36136LP or 33-36150 Super stacker from the diesel / genset. Power cable with plug provided by customer.
Information:
| Year | 2012 |
| Hours | 1,500 |
1