2016 PEERLESS 48x76
Price:USD $219,900
Buy
2016 PEERLESS 48x76
Used and New
Description:
NEW PORTABLE PUGMILL (CHOICE OF WATER OR ASPHALT SYSTEM)
Compact Portable Pugmill:
• Design Criteria:.
- Max. Average Capacity: 300 TPH of mix.
- Discharge Clearance: 11’-0” discharge height from the Pugmill to ground.
• Pugmill Box:
- Size: 48” x 76” long twin shaft.
- Replaceable Liners: ¼” thick steel.
- Mixing Paddles: 44 Ni-hard cast steel.
- Timing Gears: 3” hardened steel teeth timing spur gears.
- Drive: Class I head end.
- Gear Reducer: Dodge TAII Shaft Mount.
- Motor: 60HP 1800-RPM TEFC.
- V-belt Drive: with drive guard.
- Pugmill Hood: Removable for ease of cleaning.
• Hopper:
- Capacity: 12’x8’ Opening, 12 cu.yds Struck.
- Construction: ¼” thick steel with angle and channel iron stiffeners.
- Supports: Heavy duty angle and channel iron
• Feed Conveyor:
- Size: 30” wide x approximately 40’ long, 24” deep lattice.
- Incline: 20 degrees.
- Drive: Class II head end.
- Gear Reducer: Dodge TAII Shaft Mount.
- Backstop: Included.
- Motor: 15 HP 1800-RPM TEFC
- V-belt Drive: with drive guard
- Drive Pulley: 16” diameter, 3/8” herringbone lagged drum.
- Drive Bearings: 2 15/16” SCM Pillow Block Bearings.
- Tail Pulley: 14” diameter, wing type pulley.
- Tail Bearings: 2 7/16” SCM Pillow Block Bearings.
- Shafts: 1045 steel turned and polished.
- Take-ups: 12” travel Telescopic.
- Belt Cleaner: Martin Engineering primary belt scraper.
- Belting: 2-ply 1/8 x 1/16 220 PIW.
- Belt splice: Flexco mechanical fasteners.
- Idlers: CEMA C, 5” dia. Troughing idlers
- Load area: 20 Deg. Idlers, 11” spacing.
- Trough: 35 Deg., 4’-0“ spacing.
- Return: return idlers on 10’ spacing.
• Motor Controls & Wiring:
- Control panel: mounted on the plant with start & stop buttons for every motor.
- Variable Speed: for Main Feeder Conveyor and Water Pump with dial indicators on outside of control panel.
- Electrical data: 480 vac power, 120 vac Controls, Nema starters & breakers.
- Wiring: Plant fully wired.
• Undercarriage:
- Supports: Front & rear conveyor support. Pugmill support & bracing
- Hydraulic Raise: DC powered hydraulic unit and cylinder to raise front support from transport to operation.
- Axle: Straight single axle.
- Tires: Two Super Singles, mounted on 10 Hole Budd wheels.
- Road Towing Items: Hitch Pentle eye, Air brakes, mud flaps and taillights.
• Asphalt or Water Pump Kit:
- Plumbing: all include from pump to spry bar.
- Spray Bar: Mounted on Pugmill box with spray nozzles.
ENGINE - ISUZU 4HK1XWB05 TIER III WATER COOLED DIESEL ENGINE
GENERATOR - 100KW DIRECT COUPLED GENERATOR 480 VOLT-3 PHASE
MISCELLANEOUS - AIR CLEANER, COLD START KIT, MUFFLER, SKID, BATTERY BOX, TRAY,
CABLES, FUEL WATER SEPARATOR, PANEL AND 60 GALLON FUEL TANK
MOTOR CONTROLS & WIRING
CONTROL PANEL - MOUNTED ON THE PUGMILL PLANT WITH START & STOP BUTTONS FOR
EVERY MOTOR
VARIABLE SPEED - FOR FEEDER CONVEYOR
ELECTRICAL DATA - 480 VAC POWER, 120 VAC CONTROLS, NEMA STARTERS & BREAKERS
WIRING - PLANT FULLY WIRED
TRANSPORT INFORMATION
TRAVEL HEIGHT - 13'-6" WITH HITCH AT 30"
TRAVEL WIDTH - 8'-6"
TRAVEL LENGTH - 53'-0"
DISTANCE FROM HITCH EYE TO SINGLE STRAIT AXLE - 33'-0"
TOTAL WEIGHT - 26,000 LBS
ESTIMATED WEIGHT ON AXLES - 22,000 LBX
ESTIMATED WEIGHT ON HITCH EYE - 4,000 LBS
Compact Portable Pugmill:
• Design Criteria:.
- Max. Average Capacity: 300 TPH of mix.
- Discharge Clearance: 11’-0” discharge height from the Pugmill to ground.
• Pugmill Box:
- Size: 48” x 76” long twin shaft.
- Replaceable Liners: ¼” thick steel.
- Mixing Paddles: 44 Ni-hard cast steel.
- Timing Gears: 3” hardened steel teeth timing spur gears.
- Drive: Class I head end.
- Gear Reducer: Dodge TAII Shaft Mount.
- Motor: 60HP 1800-RPM TEFC.
- V-belt Drive: with drive guard.
- Pugmill Hood: Removable for ease of cleaning.
• Hopper:
- Capacity: 12’x8’ Opening, 12 cu.yds Struck.
- Construction: ¼” thick steel with angle and channel iron stiffeners.
- Supports: Heavy duty angle and channel iron
• Feed Conveyor:
- Size: 30” wide x approximately 40’ long, 24” deep lattice.
- Incline: 20 degrees.
- Drive: Class II head end.
- Gear Reducer: Dodge TAII Shaft Mount.
- Backstop: Included.
- Motor: 15 HP 1800-RPM TEFC
- V-belt Drive: with drive guard
- Drive Pulley: 16” diameter, 3/8” herringbone lagged drum.
- Drive Bearings: 2 15/16” SCM Pillow Block Bearings.
- Tail Pulley: 14” diameter, wing type pulley.
- Tail Bearings: 2 7/16” SCM Pillow Block Bearings.
- Shafts: 1045 steel turned and polished.
- Take-ups: 12” travel Telescopic.
- Belt Cleaner: Martin Engineering primary belt scraper.
- Belting: 2-ply 1/8 x 1/16 220 PIW.
- Belt splice: Flexco mechanical fasteners.
- Idlers: CEMA C, 5” dia. Troughing idlers
- Load area: 20 Deg. Idlers, 11” spacing.
- Trough: 35 Deg., 4’-0“ spacing.
- Return: return idlers on 10’ spacing.
• Motor Controls & Wiring:
- Control panel: mounted on the plant with start & stop buttons for every motor.
- Variable Speed: for Main Feeder Conveyor and Water Pump with dial indicators on outside of control panel.
- Electrical data: 480 vac power, 120 vac Controls, Nema starters & breakers.
- Wiring: Plant fully wired.
• Undercarriage:
- Supports: Front & rear conveyor support. Pugmill support & bracing
- Hydraulic Raise: DC powered hydraulic unit and cylinder to raise front support from transport to operation.
- Axle: Straight single axle.
- Tires: Two Super Singles, mounted on 10 Hole Budd wheels.
- Road Towing Items: Hitch Pentle eye, Air brakes, mud flaps and taillights.
• Asphalt or Water Pump Kit:
- Plumbing: all include from pump to spry bar.
- Spray Bar: Mounted on Pugmill box with spray nozzles.
ENGINE - ISUZU 4HK1XWB05 TIER III WATER COOLED DIESEL ENGINE
GENERATOR - 100KW DIRECT COUPLED GENERATOR 480 VOLT-3 PHASE
MISCELLANEOUS - AIR CLEANER, COLD START KIT, MUFFLER, SKID, BATTERY BOX, TRAY,
CABLES, FUEL WATER SEPARATOR, PANEL AND 60 GALLON FUEL TANK
MOTOR CONTROLS & WIRING
CONTROL PANEL - MOUNTED ON THE PUGMILL PLANT WITH START & STOP BUTTONS FOR
EVERY MOTOR
VARIABLE SPEED - FOR FEEDER CONVEYOR
ELECTRICAL DATA - 480 VAC POWER, 120 VAC CONTROLS, NEMA STARTERS & BREAKERS
WIRING - PLANT FULLY WIRED
TRANSPORT INFORMATION
TRAVEL HEIGHT - 13'-6" WITH HITCH AT 30"
TRAVEL WIDTH - 8'-6"
TRAVEL LENGTH - 53'-0"
DISTANCE FROM HITCH EYE TO SINGLE STRAIT AXLE - 33'-0"
TOTAL WEIGHT - 26,000 LBS
ESTIMATED WEIGHT ON AXLES - 22,000 LBX
ESTIMATED WEIGHT ON HITCH EYE - 4,000 LBS
Information:
| Year | 2016 |
| Location | Kansas City, Missouri |
1