62X24 LIPPMANN Heavy sale in North Dakota

LIPPMANN 6224 RIP RAP PLANT EQUIPPED AS PER BELOW:

STEEL TRUCK FRAM WITH KING-PIN (WITHOUT FRONT DOLLY) INCLUDES:
- TRIPLE REAR AXLES WITH TWELVE (12) HUB PILOTED WHEELS
- 11:00 X 22.5 RADIAL TUBELESS TIRES, AND AIR BRAKES
- ALSO INLCUDES ALL NECESSARY CHUTES AND SUPPORTS, SUPPORT LEGS,
GUARDS FOR V-BELT DRIVES, TAIL LIGHTS, REFLECTORS, DIRECTIONAL
SIGNALS AND MUD FLAPS
LIPPMANN-MILWAUKEE HEAVY-DUTY HORIZONTAL VIBRATING GRIZZLY
FEEDER, 62" WIDE AND 24' LONG:
- 1 1/4" THICK STEEL FEEDER PAN, 14' LONG, WITH 1/2" THICK AT STEEL LINERS
ON PAN AND 3/8" THICK AR LINERS ON SIDE PLATES OF FEEDER
- (2) 5' LONG STEP DECK GRIZZLY SECTION WITH FIRST SECTION ACCEPT ERIN
FINGERS 3" AND 2" FINGERS INSTALLED, THE SECOND SECTION WILL HAVE
GRIZZLY BARS SET AT 7" SPACING WITH EXTRA BARS AND TEMPLATES TO GO
TO 7"
- VIBRATING MECHANISM IS A MODEL LLH-26 WITH TWO FULL-LENGTH,
SELF-COUNTERWEIGHTED SOLID STEEL SHAFTS
- HELICAL GEARS
- FOUR (4) 130MM SPHERICAL ROLLER BEARINGS
- OIL SPLASH LUBRICATION SYSTEM
- MECHANISM IS ENCLOSED IN A DUST PROOF HOUSING
- SHEAVES, BELTS AND PIVOTED MOTOR BASE ARE INCLUDED IN BASE PRICE OF
FEEDER
- FEEDER INCLUDES A 60 HP, NEMA C HIGH-TORQUE 1800 RPM TEFC ELECTRIC
MOTOR
- 42" X 15' (APPROX.) FOLDING UNDER GRIZZLY DISCHARGE CONVEYOR WITH 3
PLY BELTING AND 5" CEMA C IDLERS (THIS CONVEYOR ONLY RUNS UNDER THE
FIRST GRIZZLY SECTION)
- RIGHT ANGLE DRIVE
- INCLUDES A 7.5 HP 1800 RPM TEFC ELECTRIC MOTOR
- SIDE DISCHARGE CHUTE OFF THE SECOND GRIZZLY SECTION (1/2 HARDOX)
- FRONT DISCHARGE CHUTE FOR ALL OVERSIZED MATERIAL, MILD STEEL-PLUG
LINERS (1/2" HARDOX)
- 3/4" HARDOX FEEDER HOPPER
ADDED OPTION:
- QTY. (4) FAB TEC HYDRAULIC LEVELING JACK LEGS (A8061-1)
- GUARDING - WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL
LOCAL CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM
CHECKED BY A LOCAL INSPECTOR.
AES ELECTRICAL SWITCHGEAR FOR LIPPMANN 6224 RIP RAP PLANT
- 60X60 HOFFMANN ENCLOSURE WITH LEG KIT-WELDED UPPER SECTION
- 250 AMP MAIN AND OPERATOR
- ABB VFD 60 HP FOR VIBRATING GRIZZLY FEEDER
- ALLEN BRADLEY FVNR STARTERS WITH CIRCUIT BREAKERS
- 7.5 HP CROSS CONVEYOR WITH 20 AMP CONNECTOR/PLUG
- 20 HP SPARE #1 WIRED TO HUBBELL 60 AMP RECEPTACLE
- 20 HP SPARE #2 WIRED TO HUBBELL 60 AMP RECEPTACLE
- 30 HP SPARE #1 WIRED TO HUBBELL 100 AMP RECEPTACLE
- 5KVA TRANSFORMER WITH 20A 110V SERVICE OUTLET
- 800 WATT PANEL HEATER
- 75 FT REMOTE PENDANT
- ESTOP, SAFETY STARTUP HORN (MANUAL), HOUR METER
- 100 FT POWER CORD(1/0-GGC) AND 75 FT MOTOR LEAD CORDS (2/4SO AND
10/4SO)

2017-0559 VGF 6224 RIP RAP PLANT
20170-560 VGF6224 FEEDER, VIBRATING GRIZZLY
2017-0561 CO 42"X 15'-0" SIDE DISCHARGE CONVEYOR

Year	2017
Serial Number	2017-0559
Stock Number	E00050756

LIPPMANN-MILWAUKEE 6224 RIP RAP PLANT EQUIPPED WITH:

- HEAVY DUTY HORIZONTAL VIBRATING GRIZZLY FEEDER, 62" WIDE AND 24'
LONG
- 1 1/4" THICK STEEL FEEDER PAN, 14' LONG, 1/2" THICK AR STEEL LINERS ON PAN
AND 3/8" THICK AR LINERS ON SIDE PLATES OF FEEDER
- FIRST SECTION 3" ERIN FINGERS INSTALLED, SECOND SECTION HAS 2" ERIN
FINGERS
- SECOND SECTION INCLUDES BARS ADJUSTABLE FROM 7" TO 12", CURRENTLY
SET AT 12"
- VIBRATING MECHANISM IS MODEL LLH-26 WITH 2 FULL LENGTH,
SELF-COUNTERWEIGHTED SOLID STEEL SHAFTS
- HELICAL GEARS
- (4) 130 MM SPHERICAL ROLLER BEARINGS
- OIL SPLASH LUBRICATION SYSTEM
- FEEDER REQUIRES 60 HP 1800 RPM TEFC ELECTRIC MOTOR
- 42" X 13'6" UNDER GRIZZLY DISCHARGE CONVEYOR WITH 3 PLY BELTING AND
5" CEMA C IDLERS (THIS CONVEYOR ONLY RUNS UNDER THE FIRST GRIZZLY
SECTION), 7.5 HP 1800 RPM TEFC ELECTRIC MOTOR
- (4) 70,000LB CAPACITY SET UP LEGS 12 VOLT
- SIDE DISCHARGE CHUTE OFF THE SECOND GRIZZLY SECTION
- FRONT DISCHARGE CHUTE FOR ALL OVER SIZED MATERIAL
- 3/4" HARDOX FEED HOPPER
- STEEL TRUCK FRAME WITH KING-PIN INCLUDES TRIPLE REAR AXLE WITH (12)
HUB PILOTED WHEELS, 11:00 X 22.5 RADIAL TUBELESS TIRES AND AIR BRAKES
- ALL CHUTES AND SUPPORTS, SUPPORT LEGS, GUARDS FOR V-BELT DRIVES,
TAIL LIGHTS, REFLECTORS, DIRECTIONAL SIGNALS, MUDFLAPS
- GUARDING - WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL
LOCAL CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM
CHECKED BY A LOCAL INSPECTOR. AES ELECTRICAL SWITCHGEAR FOR
LIPPMANN 6224 RIP RAP PLANT
- 60X60 HOFFMANN ENCLOSURE WITH LEG KIT-WELDED UPPER SECTION
- 175 AMP MAIN AND OPERATOR
- ABB VFD 60 HP FOR VIBRATING GRIZZLY FEEDER
- ALLEN BRADLEY FVNR STARTERS WITH CIRCUIT BREAKERS
- 10 HP CROSS CONVEYOR WITH 20 AMP CONNECTOR/PLUG
- 20 HP SPARE #1 WIRED TO HUBBELL 60 AMP RECEPTACLE
- 20 HP SPARE #2 WIRED TO HUBBELL 60 AMP RECEPTACLE
- 20 HP SPARE #3 WIRED TO HUBBELL 60 AMP RECEPTACLE
- 5KVA TRANSFORMER WITH 20A 110V SERVICE OUTLET
- 800 WATT PANEL HEATER
- 75 FT REMOTE PENDANT
- ESTOP, SAFETY STARTUP HORN (MANUAL), HOUR METER
- 100 FT POWER CORD(1/0-GGC) AND 75 FT MOTOR LEAD CORDS (2/4SO AND
10/4SO)

VGF S/N# 2014-0219

Year	2014
Location	Fargo, North Dakota
Stock Number	E00041907
Serial Number	2014-0218