307C CATERPILLAR Heavy sale in Pennsylvania

EROPS, A/C, Swing Boom, Blade, Rubber Pads, Hyd Coupler, Aux Hyd, 4301 Hours

A/C, Heater, Operating Weight (lbs): 18,479, Auxiliary Hydraulics, Quick Attach

Year	2005
Stock Number	E17-67
Hours	4,301
Horse Power	54

EROPS, Cab, Heat, Air, Blade, Good steel tracks, Good UC, 2 Speed, Blade in good shape, Manual thumb, Runs very good. Hour meter reads 1918 but is not working. Unknown hours.

This machine starts up and runs out well. Engine does not have blowby, leak or smoke. No excessive play in pins. Hydraulic power is very good. Under carriage is in good operating condition. Please watch the video below! This machine is also for rent locally so hours and condition may slightly change from time of pictures.


Specs:

Boom/Stick Option

C. SHIPPING HEIGHT OF UNIT 8.6 ft in 2630 mm
I. MAX CUTTING HEIGHT 23.9 ft in 7290 mm
J. MAX LOADING HEIGHT 16.9 ft in 5150 mm
K. MAX REACH ALONG GROUND 20.3 ft in 6200 mm
L. MAX VERTICAL WALL DIGGING DEPTH 11.9 ft in 3640 mm
M. MAX DIGGING DEPTH 13.5 ft in 4110 mm
Dimensions
B. WIDTH TO OUTSIDE OF TRACKS 7.5 ft in 2290 mm
D. LENGTH OF TRACK ON GROUND 7 ft in 2120 mm
E. GROUND CLEARANCE 1.2 ft in 380 mm
G. HEIGHT TO TOP OF CAB 8.6 ft in 2630 mm
H. TAIL SWING RADIUS 5.7 ft in 1750 mm
Undercarriage
F. TRACK GAUGE 5.7 ft in 1750 mm
N. SHOE SIZE 17.7 in 450 mm
Specification
Engine
MAKE Mitsubishi
MODEL C 4M40E1
GROSS POWER 55 hp 41 kw
NET POWER 54 hp 40.3 kw
DISPLACEMENT 173.3 cu in 2.8 L
NUMBER OF CYLINDERS 4
Operational
OPERATING WEIGHT 15895 lb 7210 kg
FUEL CAPACITY 35.7 gal 135 L
COOLING SYSTEM FLUID CAPACITY 4.1 gal 15.5 L
HYDRAUILC SYSTEM FLUID CAPACITY 24.8 gal 94 L
ENGINE OIL CAPACITY 3 gal 11.2 L
SWING DRIVE FLUID CAPACITY 0.4 gal 1.5 L
ALTERNATOR SUPPLIED AMPERAGE 35 amps
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 4550 psi 31371.1 kPa
HYDRAULIC PUMP FLOW CAPACITY 17 gal/min 64.4 L/min
Swing Mechanism
SWING SPEED 11 rpm
SWING TORQUE 10440 lb ft 14150 Nm
Undercarriage
SHOE SIZE 17.7 in 450 mm
GROUND PRESSURE 4.4 psi 30 kPa
MAX TRAVEL SPEED 3.3 mph 5.3 km/h
DRAWBAR PULL 12810 lb 57 kN
TRACK GAUGE 5.7 ft in 1750 mm
Buckets
REFERENCE BUCKET CAPACITY 0.41 yd3 0.31 m3
MINIMUM BUCKET CAPACITY 0.2 yd3 0.15 m3
MAXIMUM BUCKET CAPACITY 0.45 yd3 0.34 m3
Boom/Stick Option (HEX) 1
BOOM/STICK OPTION (HEX) 1 One piece boom/Stick 5'6" (1665mm)
SHIPPING HEIGHT OF UNIT 8.6 ft in 2630 mm
MAX DIGGING DEPTH 13.5 ft in 4110 mm
MAX REACH ALONG GROUND 20.3 ft in 6200 mm
MAX CUTTING HEIGHT 23.9 ft in 7290 mm
MAX LOADING HEIGHT 16.9 ft in 5150 mm
MAX VERTICAL WALL DIGGING DEPTH 11.9 ft in 3640 mm
Boom/Stick Option (HEX) 2
BOOM/STICK OPTION (HEX) 2 One piece boom/Stick 7'3" (2210mm)
SHIPPING HEIGHT OF UNIT 9.1 ft in 2780 mm
MAX DIGGING DEPTH 15.3 ft in 4650 mm
MAX REACH ALONG GROUND 22 ft in 6720 mm
MAX CUTTING HEIGHT 25.2 ft in 7690 mm
MAX LOADING HEIGHT 18.2 ft in 5560 mm
MAX VERTICAL WALL DIGGING DEPTH 13.6 ft in 4160 mm
Boom/Stick Option (HEX) 3
BOOM/STICK OPTION (HEX) 3 Parallel offset boom (no offset)/Stick 5'6" (1665mm)
MAX DIGGING DEPTH 13.4 ft in 4090 mm
MAX REACH ALONG GROUND 21.1 ft in 6420 mm
MAX CUTTING HEIGHT 24.9 ft in 7600 mm
MAX LOADING HEIGHT 17.9 ft in 5460 mm
MAX VERTICAL WALL DIGGING DEPTH 11.9 ft in 3630 mm
Boom/Stick Option (HEX) 4
BOOM/STICK OPTION (HEX) 4 Parallel offset boom (fully offset left)/Stick 5'6" (1665mm)
MAX DIGGING DEPTH 11.8 ft in 3590 mm
MAX REACH ALONG GROUND 19.4 ft in 5910 mm
MAX CUTTING HEIGHT 23.5 ft in 7160 mm
MAX LOADING HEIGHT 180.5 ft in 55030 mm
MAX VERTICAL WALL DIG DEPTH 10.3 ft in 3130 mm
Boom/Stick Option (HEX) 5
BOOM/STICK OPTION (HEX) 5 Parallel offset boom (fully offset right)/Stick 5'6" (1665mm)
MAX DIGGING DEPTH 12 ft in 3660 mm
MAX REACH ALONG GROUND 19.6 ft in 5980 mm
MAX CUTTING HEIGHT 23.7 ft in 7220 mm
MAX LOADING HEIGHT 16.7 ft in 5090 mm
MAX VERTICAL WALL DIG DEPTH 10.5 ft in 3200 mm
Dimensions
WIDTH TO OUTSIDE OF TRACKS 7.5 ft in 2290 mm
HEIGHT TO TOP OF CAB 8.6 ft in 2630 mm
GROUND CLEARANCE 1.2 ft in 380 mm
TAIL SWING RADIUS 5.7 ft in 1750 mm
LENGTH OF TRACK ON GROUND 7 ft in 2120 mm



NOTE**: Before coming to look at a specific piece of equipment, please make an appointment. Depending on the piece it may be at a different location.

***View many other deals*** on the Q.U.E. Sales Inc website.


We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email, text or call me with your zip code!

We accept many different payment methods, contact us for further information!

We have several finance companies that we deal with. If you are interested, contact us for a credit application!



Thank you for viewing our equipment and have a great day!

Contact us with the information provided below.

A/C, Heater, Engine Manufacturer: Mitsubishi, Engine Model: C 4M40E1, Operating Weight (lbs): 15,800

Year	2006
Location	Shirleysburg, Pennsylvania
Stock Number	307C
Serial Number	CAT0307CTBNE01139
Horse Power	55