1999 CAT 322BL
Price:USD $49,500
Buy
1999 CAT 322BL
Used and New
Description:
EROPS, Cab, Heat. Great Under Carriage including NEW Track Pads, Chain, & Sprockets. New paint & decals. 48" Tooth Bucket. Runs & operates very good. If you have any questions or would like to make appointment to inspect it, please call or email.
This machine starts up and runs out well. Engine does not have blowby, leak or smoke. No excessive play in pins. Hydraulic power is very good. Under carriage is in good operating condition. Please watch the video below! This machine is also for rent locally so hours and condition may slightly change from time of pictures.
Specs:
Boom/Stick Option
A. SHIPPING LENGTH OF UNIT 32.7 ft in 9960 mm
C. SHIPPING HEIGHT OF UNIT 10.2 ft in 3120 mm
I. MAX CUTTING HEIGHT 31.8 ft in 9680 mm
J. MAX LOADING HEIGHT 22.1 ft in 6730 mm
K. MAX REACH ALONG GROUND 32.8 ft in 10010 mm
L. MAX VERTICAL WALL DIGGING DEPTH 18.7 ft in 5700 mm
M. MAX DIGGING DEPTH 22 ft in 6710 mm
Dimensions
B. WIDTH TO OUTSIDE OF TRACKS 10.5 ft in 3190 mm
D. LENGTH OF TRACK ON GROUND 12.6 ft in 3830 mm
E. GROUND CLEARANCE 1.5 ft in 470 mm
G. HEIGHT TO TOP OF CAB 9.8 ft in 2980 mm
H. TAIL SWING RADIUS 9.5 ft in 2900 mm
O. COUNTERWEIGHT CLEARANCE 3.6 ft in 1090 mm
Undercarriage
F. TRACK GAUGE 8.5 ft in 2590 mm
N. SHOE SIZE 31.5 in 800 mm
Specification
Engine
MAKE Caterpillar
MODEL 3116TA
GROSS POWER 161 hp 120.1 kw
NET POWER 153 hp 114.1 kw
POWER MEASURED @ 1950 rpm
DISPLACEMENT 403 cu in 6.6 L
ASPIRATION Turbocharged and Aftercooled
NUMBER OF CYLINDERS 6
Operational
OPERATING WEIGHT 50177.2 lb 22760 kg
FUEL CAPACITY 89.8 gal 340 L
COOLING SYSTEM FLUID CAPACITY 8.3 gal 31.5 L
HYDRAUILC SYSTEM FLUID CAPACITY 70 gal 265 L
ENGINE OIL CAPACITY 5.7 gal 21.5 L
SWING DRIVE FLUID CAPACITY 2.1 gal 8 L
OPERATING VOLTAGE 24 V
ALTERNATOR SUPPLIED AMPERAGE 55 amps
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 4980 psi 34335.9 kPa
HYDRAULIC PUMP FLOW CAPACITY 108.3 gal/min 410 L/min
Swing Mechanism
SWING TORQUE 51850 lb ft 70299.2 Nm
Undercarriage
SHOE SIZE 31.5 in 800 mm
MAX TRAVEL SPEED 3.4 mph 5.5 km/h
DRAWBAR PULL 43612.9 lb 194 kN
TRACK GAUGE 8.5 ft in 2590 mm
Buckets
REFERENCE BUCKET CAPACITY 1.4 yd3 1.1 m3
MINIMUM BUCKET CAPACITY 1.3 yd3 0.99 m3
MAXIMUM BUCKET CAPACITY 2 yd3 1.5 m3
Boom/Stick Option (HEX) 1
BOOM/STICK OPTION (HEX) 1 Boom 19'4" (5900mm) / Stick 9'8" (2950mm)
SHIPPING HEIGHT OF UNIT 10.2 ft in 3120 mm
SHIPPING LENGTH OF UNIT 32.7 ft in 9960 mm
MAX DIGGING DEPTH 22 ft in 6710 mm
MAX REACH ALONG GROUND 32.8 ft in 10010 mm
MAX CUTTING HEIGHT 31.8 ft in 9680 mm
MAX LOADING HEIGHT 22.1 ft in 6730 mm
MAX VERTICAL WALL DIGGING DEPTH 18.7 ft in 5700 mm
Boom/Stick Option (HEX) 2
BOOM/STICK OPTION (HEX) 2 Boom 19'4" (5900mm) / Stick 8'2" (2500mm)
SHIPPING HEIGHT OF UNIT 10.8 ft in 3280 mm
SHIPPING LENGTH OF UNIT 32.8 ft in 10010 mm
MAX DIGGING DEPTH 20.5 ft in 6260 mm
MAX REACH ALONG GROUND 31.5 ft in 9590 mm
MAX CUTTING HEIGHT 31.1 ft in 9480 mm
MAX LOADING HEIGHT 21.5 ft in 6540 mm
MAX VERTICAL WALL DIGGING DEPTH 17.3 ft in 5260 mm
Boom/Stick Option (HEX) 3
BOOM/STICK OPTION (HEX) 3 Mass Boom 17'5" (5300mm) / Stick 8'2" (2500mm)
SHIPPING HEIGHT OF UNIT 11.3 ft in 3450 mm
SHIPPING LENGTH OF UNIT 30.8 ft in 9400 mm
MAX DIGGING DEPTH 19.4 ft in 5910 mm
MAX REACH ALONG GROUND 29.9 ft in 9120 mm
MAX CUTTING HEIGHT 30.1 ft in 9160 mm
MAX LOADING HEIGHT 19.6 ft in 5980 mm
MAX VERTICAL WALL DIGGING DEPTH 17 ft in 5180 mm
Dimensions
WIDTH TO OUTSIDE OF TRACKS 10.5 ft in 3190 mm
HEIGHT TO TOP OF CAB 9.8 ft in 2980 mm
GROUND CLEARANCE 1.5 ft in 470 mm
COUNTERWEIGHT CLEARANCE 3.6 ft in 1090 mm
TAIL SWING RADIUS 9.5 ft in 2900 mm
LENGTH OF TRACK ON GROUND 12.6 ft in 3830 mm
NOTE**: Before coming to look at a specific piece of equipment, please make an appointment. Depending on the piece it may be at a different location.
***View many other deals*** on the Q.U.E. Sales Inc website.
We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email, text or call me with your zip code!
We accept many different payment methods, contact us for further information!
We have several finance companies that we deal with. If you are interested, contact us for a credit application!
Thank you for viewing our equipment and have a great day!
Contact us with the information provided below.
Operating Weight (lbs): 50,177
This machine starts up and runs out well. Engine does not have blowby, leak or smoke. No excessive play in pins. Hydraulic power is very good. Under carriage is in good operating condition. Please watch the video below! This machine is also for rent locally so hours and condition may slightly change from time of pictures.
Specs:
Boom/Stick Option
A. SHIPPING LENGTH OF UNIT 32.7 ft in 9960 mm
C. SHIPPING HEIGHT OF UNIT 10.2 ft in 3120 mm
I. MAX CUTTING HEIGHT 31.8 ft in 9680 mm
J. MAX LOADING HEIGHT 22.1 ft in 6730 mm
K. MAX REACH ALONG GROUND 32.8 ft in 10010 mm
L. MAX VERTICAL WALL DIGGING DEPTH 18.7 ft in 5700 mm
M. MAX DIGGING DEPTH 22 ft in 6710 mm
Dimensions
B. WIDTH TO OUTSIDE OF TRACKS 10.5 ft in 3190 mm
D. LENGTH OF TRACK ON GROUND 12.6 ft in 3830 mm
E. GROUND CLEARANCE 1.5 ft in 470 mm
G. HEIGHT TO TOP OF CAB 9.8 ft in 2980 mm
H. TAIL SWING RADIUS 9.5 ft in 2900 mm
O. COUNTERWEIGHT CLEARANCE 3.6 ft in 1090 mm
Undercarriage
F. TRACK GAUGE 8.5 ft in 2590 mm
N. SHOE SIZE 31.5 in 800 mm
Specification
Engine
MAKE Caterpillar
MODEL 3116TA
GROSS POWER 161 hp 120.1 kw
NET POWER 153 hp 114.1 kw
POWER MEASURED @ 1950 rpm
DISPLACEMENT 403 cu in 6.6 L
ASPIRATION Turbocharged and Aftercooled
NUMBER OF CYLINDERS 6
Operational
OPERATING WEIGHT 50177.2 lb 22760 kg
FUEL CAPACITY 89.8 gal 340 L
COOLING SYSTEM FLUID CAPACITY 8.3 gal 31.5 L
HYDRAUILC SYSTEM FLUID CAPACITY 70 gal 265 L
ENGINE OIL CAPACITY 5.7 gal 21.5 L
SWING DRIVE FLUID CAPACITY 2.1 gal 8 L
OPERATING VOLTAGE 24 V
ALTERNATOR SUPPLIED AMPERAGE 55 amps
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 4980 psi 34335.9 kPa
HYDRAULIC PUMP FLOW CAPACITY 108.3 gal/min 410 L/min
Swing Mechanism
SWING TORQUE 51850 lb ft 70299.2 Nm
Undercarriage
SHOE SIZE 31.5 in 800 mm
MAX TRAVEL SPEED 3.4 mph 5.5 km/h
DRAWBAR PULL 43612.9 lb 194 kN
TRACK GAUGE 8.5 ft in 2590 mm
Buckets
REFERENCE BUCKET CAPACITY 1.4 yd3 1.1 m3
MINIMUM BUCKET CAPACITY 1.3 yd3 0.99 m3
MAXIMUM BUCKET CAPACITY 2 yd3 1.5 m3
Boom/Stick Option (HEX) 1
BOOM/STICK OPTION (HEX) 1 Boom 19'4" (5900mm) / Stick 9'8" (2950mm)
SHIPPING HEIGHT OF UNIT 10.2 ft in 3120 mm
SHIPPING LENGTH OF UNIT 32.7 ft in 9960 mm
MAX DIGGING DEPTH 22 ft in 6710 mm
MAX REACH ALONG GROUND 32.8 ft in 10010 mm
MAX CUTTING HEIGHT 31.8 ft in 9680 mm
MAX LOADING HEIGHT 22.1 ft in 6730 mm
MAX VERTICAL WALL DIGGING DEPTH 18.7 ft in 5700 mm
Boom/Stick Option (HEX) 2
BOOM/STICK OPTION (HEX) 2 Boom 19'4" (5900mm) / Stick 8'2" (2500mm)
SHIPPING HEIGHT OF UNIT 10.8 ft in 3280 mm
SHIPPING LENGTH OF UNIT 32.8 ft in 10010 mm
MAX DIGGING DEPTH 20.5 ft in 6260 mm
MAX REACH ALONG GROUND 31.5 ft in 9590 mm
MAX CUTTING HEIGHT 31.1 ft in 9480 mm
MAX LOADING HEIGHT 21.5 ft in 6540 mm
MAX VERTICAL WALL DIGGING DEPTH 17.3 ft in 5260 mm
Boom/Stick Option (HEX) 3
BOOM/STICK OPTION (HEX) 3 Mass Boom 17'5" (5300mm) / Stick 8'2" (2500mm)
SHIPPING HEIGHT OF UNIT 11.3 ft in 3450 mm
SHIPPING LENGTH OF UNIT 30.8 ft in 9400 mm
MAX DIGGING DEPTH 19.4 ft in 5910 mm
MAX REACH ALONG GROUND 29.9 ft in 9120 mm
MAX CUTTING HEIGHT 30.1 ft in 9160 mm
MAX LOADING HEIGHT 19.6 ft in 5980 mm
MAX VERTICAL WALL DIGGING DEPTH 17 ft in 5180 mm
Dimensions
WIDTH TO OUTSIDE OF TRACKS 10.5 ft in 3190 mm
HEIGHT TO TOP OF CAB 9.8 ft in 2980 mm
GROUND CLEARANCE 1.5 ft in 470 mm
COUNTERWEIGHT CLEARANCE 3.6 ft in 1090 mm
TAIL SWING RADIUS 9.5 ft in 2900 mm
LENGTH OF TRACK ON GROUND 12.6 ft in 3830 mm
NOTE**: Before coming to look at a specific piece of equipment, please make an appointment. Depending on the piece it may be at a different location.
***View many other deals*** on the Q.U.E. Sales Inc website.
We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email, text or call me with your zip code!
We accept many different payment methods, contact us for further information!
We have several finance companies that we deal with. If you are interested, contact us for a credit application!
Thank you for viewing our equipment and have a great day!
Contact us with the information provided below.
Operating Weight (lbs): 50,177
Information:
| Year | 1999 |
| Serial Number | 2ES00816 |
| Stock Number | 322BL |
| Hours | 9,629 |
| Horse Power | 155 |
1998 CAT 322BL
1997 CAT 322BL
Price:USD $25,000
Buy
1997 CAT 322BL
Used and New
Description:
CLEAN UNIT FOR THE HOURS, COUPLER , BUCKET, NICE BTM, RUNS GREAT
Information:
| Year | 1997 |
| Location | Lebanon, Pennsylvania |
| Hours | 16,000 |
| Serial Number | 1YS00585 |
CAT 322BL
1