2004 CAT D5G LGP
Price:USD $46,500
Buy
2004 CAT D5G LGP
Used and New
Description:
EROPS, A/C, 6 Way Blade, Trimble Ready, Good U/C, CLEAN MACHINE
Information:
Year | 2004 |
Stock Number | E17-65 |
ROPS | Open |
2007 CAT D5G LGP
Price:USD $49,500
Buy
2007 CAT D5G LGP
Used and New
Description:
EROPS, A/C, 6 Way Blade, Good U/C, Trimble Ready, CLEAN MACHINE
Information:
Year | 2007 |
Stock Number | E17-66 |
ROPS | Enclosed |
Hours | 5,254 |
2005 CAT D5G LGP
Price:USD $49,500

Buy
2005 CAT D5G LGP
Used and New
Description:
EROPS, Cab, Heat, Air. 6 way blade, Good 60% average on under carriage. Pins and bushings have wear, but have NOT been turned. Sprockets roughly 40-50% life left, Pads have 90% life left. All hookups and wiring in place for GPS set up. No GPS with unit though. Lights work, Machine is in very good condition. New paint & decals. Looks and Runs good...Please call or email to set up time to come out and see it.
Machine starts up and runs and operates well. Engine is in good shape. Gears work well. Under carriage is in running condition. 6 way blade. Good running and operating machine for job or farm use etc! This machine is also for rent locally so hours and condition may slightly change from time of pictures.
Specs:
Dimensions
A. LENGTH W/ BLADE 14 ft in 4252 mm
B. WIDTH OVER TRACKS 7.8 ft in 2387 mm
C. HEIGHT TO TOP OF CAB 9 ft in 2728 mm
D. LENGTH OF TRACK ON GROUND 7.6 ft in 2317 mm
E. GROUND CLEARANCE 1.3 ft in 384 mm
F. LENGTH W/O BLADE 10.5 ft in 3184 mm
Undercarriage
G. TRACK GAUGE 5.7 ft in 1727 mm
H. STANDARD SHOE SIZE 26 in 660 mm
Specification
Engine
MAKE Caterpillar
MODEL 3046T
GROSS POWER 99 hp 74 kw
NET POWER 90 hp 67 kw
POWER MEASURED @ 2200 rpm
DISPLACEMENT 305 cu in 5 L
Operational
OPERATING WEIGHT 20434 lb 9269 kg
FUEL CAPACITY 48.6 gal 187 L
COOLING SYSTEM FLUID CAPACITY 4.3 gal 16.1 L
ENGINE OIL CAPACITY 3.4 gal 13 L
HYDRAULIC FLUID CAPACITY 12 gal 46.5 L
FINAL DRIVES FLUID CAPACITY 5.7 gal 21.5 L
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 120 amps
Transmission
TYPE Hydrostatic
NUMBER OF FORWARD GEARS 1
NUMBER OF REVERSE GEARS 1
MAX SPEED - FORWARD 5.6 mph 9 km/h
MAX SPEED - REVERSE 6 mph 9.6 km/h
Undercarriage
GROUND PRESSURE 4.3 psi 29.7 kPa
GROUND CONTACT AREA 4741 in2 3.1 m2
STANDARD SHOE SIZE 26 in 660 mm
NUMBER OF SHOES PER SIDE 39
NUMBER OF TRACK ROLLERS PER SIDE 7
TRACK GAUGE 5.7 ft in 1727 mm
Hydraulic System
RELIEF VALVE PRESSURE 2900 psi 20000 kPa
PUMP FLOW CAPACITY 16.1 gal/min 61.1 L/min
Standard Blade
WIDTH 10.7 ft in 3254 mm
HEIGHT 40.5 in 1028 mm
CAPACITY 3.1 yd3 2.3 m3
BLADE ANGLE (BOTH DIRECTIONS) 25 degrees
CUTTING DEPTH 22.9 in 582 mm
Dimensions
LENGTH W/O BLADE 10.5 ft in 3184 mm
LENGTH W/ BLADE 14 ft in 4252 mm
WIDTH OVER TRACKS 7.8 ft in 2387 mm
HEIGHT TO TOP OF CAB 9 ft in 2728 mm
LENGTH OF TRACK ON GROUND 7.6 ft in 2317 mm
GROUND CLEARANCE 1.3 ft in 384 mm
NOTE**: Before coming to look at a specific piece of equipment, please make an appointment. Depending on the piece it may be at a different location.
***View many other deals*** on the Q.U.E. Sales Inc website.
We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email, text or call me with your zip code!
We accept many different payment methods, contact us for further information!
We have several finance companies that we deal with. If you are interested, contact us for a credit application!
Thank you for viewing our equipment and have a great day!
Contact us with the information provided below.
Machine starts up and runs and operates well. Engine is in good shape. Gears work well. Under carriage is in running condition. 6 way blade. Good running and operating machine for job or farm use etc! This machine is also for rent locally so hours and condition may slightly change from time of pictures.
Specs:
Dimensions
A. LENGTH W/ BLADE 14 ft in 4252 mm
B. WIDTH OVER TRACKS 7.8 ft in 2387 mm
C. HEIGHT TO TOP OF CAB 9 ft in 2728 mm
D. LENGTH OF TRACK ON GROUND 7.6 ft in 2317 mm
E. GROUND CLEARANCE 1.3 ft in 384 mm
F. LENGTH W/O BLADE 10.5 ft in 3184 mm
Undercarriage
G. TRACK GAUGE 5.7 ft in 1727 mm
H. STANDARD SHOE SIZE 26 in 660 mm
Specification
Engine
MAKE Caterpillar
MODEL 3046T
GROSS POWER 99 hp 74 kw
NET POWER 90 hp 67 kw
POWER MEASURED @ 2200 rpm
DISPLACEMENT 305 cu in 5 L
Operational
OPERATING WEIGHT 20434 lb 9269 kg
FUEL CAPACITY 48.6 gal 187 L
COOLING SYSTEM FLUID CAPACITY 4.3 gal 16.1 L
ENGINE OIL CAPACITY 3.4 gal 13 L
HYDRAULIC FLUID CAPACITY 12 gal 46.5 L
FINAL DRIVES FLUID CAPACITY 5.7 gal 21.5 L
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 120 amps
Transmission
TYPE Hydrostatic
NUMBER OF FORWARD GEARS 1
NUMBER OF REVERSE GEARS 1
MAX SPEED - FORWARD 5.6 mph 9 km/h
MAX SPEED - REVERSE 6 mph 9.6 km/h
Undercarriage
GROUND PRESSURE 4.3 psi 29.7 kPa
GROUND CONTACT AREA 4741 in2 3.1 m2
STANDARD SHOE SIZE 26 in 660 mm
NUMBER OF SHOES PER SIDE 39
NUMBER OF TRACK ROLLERS PER SIDE 7
TRACK GAUGE 5.7 ft in 1727 mm
Hydraulic System
RELIEF VALVE PRESSURE 2900 psi 20000 kPa
PUMP FLOW CAPACITY 16.1 gal/min 61.1 L/min
Standard Blade
WIDTH 10.7 ft in 3254 mm
HEIGHT 40.5 in 1028 mm
CAPACITY 3.1 yd3 2.3 m3
BLADE ANGLE (BOTH DIRECTIONS) 25 degrees
CUTTING DEPTH 22.9 in 582 mm
Dimensions
LENGTH W/O BLADE 10.5 ft in 3184 mm
LENGTH W/ BLADE 14 ft in 4252 mm
WIDTH OVER TRACKS 7.8 ft in 2387 mm
HEIGHT TO TOP OF CAB 9 ft in 2728 mm
LENGTH OF TRACK ON GROUND 7.6 ft in 2317 mm
GROUND CLEARANCE 1.3 ft in 384 mm
NOTE**: Before coming to look at a specific piece of equipment, please make an appointment. Depending on the piece it may be at a different location.
***View many other deals*** on the Q.U.E. Sales Inc website.
We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email, text or call me with your zip code!
We accept many different payment methods, contact us for further information!
We have several finance companies that we deal with. If you are interested, contact us for a credit application!
Thank you for viewing our equipment and have a great day!
Contact us with the information provided below.
Information:
Year | 2005 |
Serial Number | CAT00D5GLRKG01885 |
Stock Number | D5GLGP |
ROPS | Enclosed |
Hours | 6,883 |
Horsepower | 90 |
2001 CAT D5G LGP
Price:Call

Buy
2001 CAT D5G LGP
Used and New
Description:
EROPS, Cab, Heat, AC, 80% UC, New Chain, Pads & Sprockets. Front Idlers and Bottom rollers in good condition. Good seat, . Joystick steering controls. 6 way blade, Blade is in good shape. Good paint and decals...Machine starts right up and runs well. Set up appointment to come take a look.
Machine starts up and runs and operates well. Engine is in good shape. Gears work well. Under carriage is in running condition. 6 way blade. Good running and operating machine for job or farm use etc!
Specs:
Dimensions
A. LENGTH W/ BLADE 14 ft in 4252 mm
B. WIDTH OVER TRACKS 7.8 ft in 2387 mm
C. HEIGHT TO TOP OF CAB 9 ft in 2728 mm
D. LENGTH OF TRACK ON GROUND 7.6 ft in 2317 mm
E. GROUND CLEARANCE 1.3 ft in 384 mm
F. LENGTH W/O BLADE 10.5 ft in 3184 mm
Undercarriage
G. TRACK GAUGE 5.7 ft in 1727 mm
H. STANDARD SHOE SIZE 26 in 660 mm
Specification
Engine
MAKE Caterpillar
MODEL 3046T
GROSS POWER 99 hp 74 kw
NET POWER 90 hp 67 kw
POWER MEASURED @ 2200 rpm
DISPLACEMENT 305 cu in 5 L
Operational
OPERATING WEIGHT 20434 lb 9269 kg
FUEL CAPACITY 48.6 gal 187 L
COOLING SYSTEM FLUID CAPACITY 4.3 gal 16.1 L
ENGINE OIL CAPACITY 3.4 gal 13 L
HYDRAULIC FLUID CAPACITY 12 gal 46.5 L
FINAL DRIVES FLUID CAPACITY 5.7 gal 21.5 L
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 120 amps
Transmission
TYPE Hydrostatic
NUMBER OF FORWARD GEARS 1
NUMBER OF REVERSE GEARS 1
MAX SPEED - FORWARD 5.6 mph 9 km/h
MAX SPEED - REVERSE 6 mph 9.6 km/h
Undercarriage
GROUND PRESSURE 4.3 psi 29.7 kPa
GROUND CONTACT AREA 4741 in2 3.1 m2
STANDARD SHOE SIZE 26 in 660 mm
NUMBER OF SHOES PER SIDE 39
NUMBER OF TRACK ROLLERS PER SIDE 7
TRACK GAUGE 5.7 ft in 1727 mm
Hydraulic System
RELIEF VALVE PRESSURE 2900 psi 20000 kPa
PUMP FLOW CAPACITY 16.1 gal/min 61.1 L/min
Standard Blade
WIDTH 10.7 ft in 3254 mm
HEIGHT 40.5 in 1028 mm
CAPACITY 3.1 yd3 2.3 m3
BLADE ANGLE (BOTH DIRECTIONS) 25 degrees
CUTTING DEPTH 22.9 in 582 mm
Dimensions
LENGTH W/O BLADE 10.5 ft in 3184 mm
LENGTH W/ BLADE 14 ft in 4252 mm
WIDTH OVER TRACKS 7.8 ft in 2387 mm
HEIGHT TO TOP OF CAB 9 ft in 2728 mm
LENGTH OF TRACK ON GROUND 7.6 ft in 2317 mm
GROUND CLEARANCE 1.3 ft in 384 mm
NOTE**: Before coming to look at a specific piece of equipment, please make an appointment. Depending on the piece it may be at a different location.
***View many other deals*** on the Q.U.E. Sales Inc website.
We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email, text or call me with your zip code!
We accept many different payment methods, contact us for further information!
We have several finance companies that we deal with. If you are interested, contact us for a credit application!
Thank you for viewing our equipment and have a great day!
Contact us with the information provided below.
Machine starts up and runs and operates well. Engine is in good shape. Gears work well. Under carriage is in running condition. 6 way blade. Good running and operating machine for job or farm use etc!
Specs:
Dimensions
A. LENGTH W/ BLADE 14 ft in 4252 mm
B. WIDTH OVER TRACKS 7.8 ft in 2387 mm
C. HEIGHT TO TOP OF CAB 9 ft in 2728 mm
D. LENGTH OF TRACK ON GROUND 7.6 ft in 2317 mm
E. GROUND CLEARANCE 1.3 ft in 384 mm
F. LENGTH W/O BLADE 10.5 ft in 3184 mm
Undercarriage
G. TRACK GAUGE 5.7 ft in 1727 mm
H. STANDARD SHOE SIZE 26 in 660 mm
Specification
Engine
MAKE Caterpillar
MODEL 3046T
GROSS POWER 99 hp 74 kw
NET POWER 90 hp 67 kw
POWER MEASURED @ 2200 rpm
DISPLACEMENT 305 cu in 5 L
Operational
OPERATING WEIGHT 20434 lb 9269 kg
FUEL CAPACITY 48.6 gal 187 L
COOLING SYSTEM FLUID CAPACITY 4.3 gal 16.1 L
ENGINE OIL CAPACITY 3.4 gal 13 L
HYDRAULIC FLUID CAPACITY 12 gal 46.5 L
FINAL DRIVES FLUID CAPACITY 5.7 gal 21.5 L
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 120 amps
Transmission
TYPE Hydrostatic
NUMBER OF FORWARD GEARS 1
NUMBER OF REVERSE GEARS 1
MAX SPEED - FORWARD 5.6 mph 9 km/h
MAX SPEED - REVERSE 6 mph 9.6 km/h
Undercarriage
GROUND PRESSURE 4.3 psi 29.7 kPa
GROUND CONTACT AREA 4741 in2 3.1 m2
STANDARD SHOE SIZE 26 in 660 mm
NUMBER OF SHOES PER SIDE 39
NUMBER OF TRACK ROLLERS PER SIDE 7
TRACK GAUGE 5.7 ft in 1727 mm
Hydraulic System
RELIEF VALVE PRESSURE 2900 psi 20000 kPa
PUMP FLOW CAPACITY 16.1 gal/min 61.1 L/min
Standard Blade
WIDTH 10.7 ft in 3254 mm
HEIGHT 40.5 in 1028 mm
CAPACITY 3.1 yd3 2.3 m3
BLADE ANGLE (BOTH DIRECTIONS) 25 degrees
CUTTING DEPTH 22.9 in 582 mm
Dimensions
LENGTH W/O BLADE 10.5 ft in 3184 mm
LENGTH W/ BLADE 14 ft in 4252 mm
WIDTH OVER TRACKS 7.8 ft in 2387 mm
HEIGHT TO TOP OF CAB 9 ft in 2728 mm
LENGTH OF TRACK ON GROUND 7.6 ft in 2317 mm
GROUND CLEARANCE 1.3 ft in 384 mm
NOTE**: Before coming to look at a specific piece of equipment, please make an appointment. Depending on the piece it may be at a different location.
***View many other deals*** on the Q.U.E. Sales Inc website.
We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email, text or call me with your zip code!
We accept many different payment methods, contact us for further information!
We have several finance companies that we deal with. If you are interested, contact us for a credit application!
Thank you for viewing our equipment and have a great day!
Contact us with the information provided below.
Information:
Year | 2001 |
Serial Number | CAT00D5GAFDW00280 |
Stock Number | D5GLGP |
ROPS | Enclosed |
Hours | 4,345 |
Horsepower | 90 |
2006 CAT D5G LGP
Price:USD $46,000
Buy
2006 CAT D5G LGP
Used and New
Description:
EROPS HEAT A/C 10'7'' PAT GOOD UNDERCARRIAGE 26'' PADS
Information:
Year | 2006 |
Location | Manheim, Pennsylvania |
Stock Number | 32930 |
ROPS | Enclosed |
Hours | 2,667 |
1