BROOMBEAR ELGIN Heavy sale in Pennsylvania

2005 Elgin Broom Bear Street Sweeper

General
 The intent of this specification is to list the model and design of the above stated street sweeper. It has extension brooms capable of removing litter, debris, etc. from street surfaces. All items appearing in Manufacturer’s published literature and specifications as standard are assumed to be included in this proposal.

Cab/Chassis
 Diesel engine; Shatterproof safety glass, lightly tinted windshield; Dual two-speed windshield wipers and washers; factory installed AC/Heater and defroster; high back air suspension bucket seats for both operator positions.
 Dual operating controls, RH and LH, AM/FM radio, LH and RH grab handles, seatbelts, LH and RH electric remote Moto outside mirrors, with 8” spot mirrors.
 Controls for all drive and sweeping functions in-cab mounted.
 Engine protection system utilizing coolant temperature, oil pressure, etc.
 Minimum H.P. on chassis engine is 210
 Chassis 33,000 pound GVWR and meet all current emission and motor vehicle standards

Electrical System, 12 Volt
 Std. Sealed multiple beam headlights with dimmer switch, combination stop, tail, backup and directional signals, hazard warning flashers, clearance lights, front side marker lights, inside cab dome light and instrument lights.
 Wiring harnesses are to be color coded with a preference for hot stamping and labeling a min. of every 12”.
 Battery box/holder(s) are mounted to chassis easily accessible.

Brakes
 Full air, service complete, cam type
 Parking brake spring set with air release

Steering
 Full power hydraulic

Side or Gutter Brooms
 Located each side, center of sweeper; hydraulically driven and hydraulic or pneumatic raised, lowered, suspended, adjusted, and tilted with inside cab controls.
 Power tilt gutter brooms on both sides controlled from inside cab.

Water System
 Industrial grade polyethylene water tank with filler capacity, strainer and tank level indicator. Four (4) spray nozzles on main broom, three (3) on each side broom, and a front spray bar (8) spray nozzles. All spray nozzles controlled separately on console inside cab.
 Inside cab ‘low’ water indicator.
 Hydrant fill hose, 12 feet.

Hopper
 Hopper is 4.5 cubic yards
 LED light inside
 For safety, a hopper load indicator to warn Operator that chassis is loaded to capacity of chassis suspension.

Instruments, Inside cab mounted
 Water temperature, oil pressure and diesel gauges for engine, ammeter, speedometer/odometer, tachometer. All instruments are to be located on dash of cab, centrally located for good vision from operator position(s).

Control Panel
 Includes all sweeping and auxiliary engine controls. The control panel shall be mounted forward in the truck cab to allow easy viewing and access to all controls from either operator’s position.

Safety Systems
 Backup alarm when transmission is placed in reverse, all sweep functions shall stop rotating and raise-up.
 Two (2) top-mounted STROBE warning lights are supplied with light protector. One (1) STROBE warning light to be mounted rear of unit and one (1) STROBE warning light to be mounted rear of cab, but not on cab itself.
 Two (2) flush mounted STROBE warning lights are installed in bumper (front & rear).

Year	2005
Location	Friedens, Pennsylvania
ROPS	Enclosed
Serial Number	1FVABTDC65DN92058