2008 HITACHI ZX240 LC-3
Price:USD $57,500
Buy
2008 HITACHI ZX240 LC-3
Used and New
Description:
EROPS, Cab, Heat, Air (Blows but not cold). Mechanical Thumb, Good Under Carriage, Runs & operates very good. 1.75 CY, 48" Bucket made by H&H. If you have any questions or would like to make appointment to inspect it, please call or email.
This machine starts up and runs out well. Engine does not have blowby, leak or smoke. No excessive play in pins. Hydraulic power is very good. Under carriage is in good operating condition. Please watch the video below! This machine is also for rent locally so hours and condition may slightly change from time of pictures.
Specs:
A. SHIPPING LENGTH OF UNIT 33.3 ft in 10150 mm
C. SHIPPING HEIGHT OF UNIT 10.1 ft in 3070 mm
I. MAX CUTTING HEIGHT 33.2 ft in 10120 mm
J. MAX LOADING HEIGHT 23.5 ft in 7160 mm
K. MAX REACH ALONG GROUND 32.8 ft in 9990 mm
L. MAX VERTICAL WALL DIGGING DEPTH 19.4 ft in 5910 mm
M. MAX DIGGING DEPTH 22.4 ft in 6840 mm
Dimensions
B. WIDTH TO OUTSIDE OF TRACKS 11.1 ft in 3390 mm
D. LENGTH OF TRACK ON GROUND 12.6 ft in 3840 mm
E. GROUND CLEARANCE 1.5 ft in 460 mm
G. HEIGHT TO TOP OF CAB 9.9 ft in 3020 mm
H. TAIL SWING RADIUS 9.6 ft in 2940 mm
O. COUNTERWEIGHT CLEARANCE 3.6 ft in 1090 mm
Undercarriage
F. TRACK GAUGE 8.5 ft in 2590 mm
N. SHOE SIZE 31.5 in 800 mm
Specification
Engine
MAKE Isuzu
MODEL AH-4HK1XYSA-01
NET POWER 177 hp 132 kw
POWER MEASURED @ 2000 rpm
DISPLACEMENT 317 cu in 5.2 L
NUMBER OF CYLINDERS 4
ASPIRATION Turbocharged, intercooled
Operational
OPERATING WEIGHT 54654 lb 24791 kg
FUEL CAPACITY 132.1 gal 500 L
COOLING SYSTEM FLUID CAPACITY 6.9 gal 26 L
HYDRAUILC SYSTEM FLUID CAPACITY 63.4 gal 240 L
ENGINE OIL CAPACITY 6.1 gal 23 L
SWING DRIVE FLUID CAPACITY 1.8 gal 7 L
OPERATING VOLTAGE 24 V
ALTERNATOR SUPPLIED AMPERAGE 50 amps
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 4980 psi 34335.9 kPa
HYDRAULIC PUMP FLOW CAPACITY 118.3 gal/min 448 L/min
Swing Mechanism
SWING SPEED 13.5 rpm
SWING TORQUE 54899 lb ft 74433 Nm
Undercarriage
NUMBER OF SHOES PER SIDE 51
SHOE SIZE 31.5 in 800 mm
NUMBER OF CARRIER ROLLERS PER SIDE 2
NUMBER OF TRACK ROLLERS PER SIDE 9
GROUND PRESSURE 5.3 psi 36.8 kPa
MAX TRAVEL SPEED 3.4 mph 5.5 km/h
DRAWBAR PULL 49920 lb 222.1 kN
TRACK GAUGE 8.5 ft in 2590 mm
Buckets
REFERENCE BUCKET CAPACITY 1.8 yd3 1.4 m3
Boom/Stick Option (HEX) 1
BOOM/STICK OPTION (HEX) 1 Stick 9'9" (2960mm)
SHIPPING HEIGHT OF UNIT 10.1 ft in 3070 mm
SHIPPING LENGTH OF UNIT 33.3 ft in 10150 mm
MAX DIGGING DEPTH 22.4 ft in 6840 mm
MAX REACH ALONG GROUND 32.8 ft in 9990 mm
MAX CUTTING HEIGHT 33.2 ft in 10120 mm
MAX LOADING HEIGHT 23.5 ft in 7160 mm
MAX VERTICAL WALL DIGGING DEPTH 19.4 ft in 5910 mm
Boom/Stick Option (HEX) 2
BOOM/STICK OPTION (HEX) 2 Stick 11'10" (3610mm)
SHIPPING HEIGHT OF UNIT 10.3 ft in 3140 mm
SHIPPING LENGTH OF UNIT 33.5 ft in 10210 mm
MAX DIGGING DEPTH 24.6 ft in 7490 mm
MAX REACH ALONG GROUND 34.9 ft in 10640 mm
MAX CUTTING HEIGHT 34.5 ft in 10520 mm
MAX LOADING HEIGHT 24.7 ft in 7540 mm
MAX VERTICAL WALL DIGGING DEPTH 21.8 ft in 6630 mm
Dimensions
WIDTH TO OUTSIDE OF TRACKS 11.1 ft in 3390 mm
HEIGHT TO TOP OF CAB 9.9 ft in 3020 mm
GROUND CLEARANCE 1.5 ft in 460 mm
COUNTERWEIGHT CLEARANCE 3.6 ft in 1090 mm
TAIL SWING RADIUS 9.6 ft in 2940 mm
LENGTH OF TRACK ON GROUND 12.6 ft in 3840 mm
NOTE**: Before coming to look at a specific piece of equipment, please make an appointment. Depending on the piece it may be at a different location.
***View many other deals*** on the Q.U.E. Sales Inc website.
We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email, text or call me with your zip code!
We accept many different payment methods, contact us for further information!
We have several finance companies that we deal with. If you are interested, contact us for a credit application!
Thank you for viewing our equipment and have a great day!
Contact us with the information provided below.
Operating Weight (lbs): 54,654, A/C, Heater, Shipping Weight: 54,654, Engine Manufacturer: ISUZU, Engine Model: AH-4HK1XYSA-01
This machine starts up and runs out well. Engine does not have blowby, leak or smoke. No excessive play in pins. Hydraulic power is very good. Under carriage is in good operating condition. Please watch the video below! This machine is also for rent locally so hours and condition may slightly change from time of pictures.
Specs:
A. SHIPPING LENGTH OF UNIT 33.3 ft in 10150 mm
C. SHIPPING HEIGHT OF UNIT 10.1 ft in 3070 mm
I. MAX CUTTING HEIGHT 33.2 ft in 10120 mm
J. MAX LOADING HEIGHT 23.5 ft in 7160 mm
K. MAX REACH ALONG GROUND 32.8 ft in 9990 mm
L. MAX VERTICAL WALL DIGGING DEPTH 19.4 ft in 5910 mm
M. MAX DIGGING DEPTH 22.4 ft in 6840 mm
Dimensions
B. WIDTH TO OUTSIDE OF TRACKS 11.1 ft in 3390 mm
D. LENGTH OF TRACK ON GROUND 12.6 ft in 3840 mm
E. GROUND CLEARANCE 1.5 ft in 460 mm
G. HEIGHT TO TOP OF CAB 9.9 ft in 3020 mm
H. TAIL SWING RADIUS 9.6 ft in 2940 mm
O. COUNTERWEIGHT CLEARANCE 3.6 ft in 1090 mm
Undercarriage
F. TRACK GAUGE 8.5 ft in 2590 mm
N. SHOE SIZE 31.5 in 800 mm
Specification
Engine
MAKE Isuzu
MODEL AH-4HK1XYSA-01
NET POWER 177 hp 132 kw
POWER MEASURED @ 2000 rpm
DISPLACEMENT 317 cu in 5.2 L
NUMBER OF CYLINDERS 4
ASPIRATION Turbocharged, intercooled
Operational
OPERATING WEIGHT 54654 lb 24791 kg
FUEL CAPACITY 132.1 gal 500 L
COOLING SYSTEM FLUID CAPACITY 6.9 gal 26 L
HYDRAUILC SYSTEM FLUID CAPACITY 63.4 gal 240 L
ENGINE OIL CAPACITY 6.1 gal 23 L
SWING DRIVE FLUID CAPACITY 1.8 gal 7 L
OPERATING VOLTAGE 24 V
ALTERNATOR SUPPLIED AMPERAGE 50 amps
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 4980 psi 34335.9 kPa
HYDRAULIC PUMP FLOW CAPACITY 118.3 gal/min 448 L/min
Swing Mechanism
SWING SPEED 13.5 rpm
SWING TORQUE 54899 lb ft 74433 Nm
Undercarriage
NUMBER OF SHOES PER SIDE 51
SHOE SIZE 31.5 in 800 mm
NUMBER OF CARRIER ROLLERS PER SIDE 2
NUMBER OF TRACK ROLLERS PER SIDE 9
GROUND PRESSURE 5.3 psi 36.8 kPa
MAX TRAVEL SPEED 3.4 mph 5.5 km/h
DRAWBAR PULL 49920 lb 222.1 kN
TRACK GAUGE 8.5 ft in 2590 mm
Buckets
REFERENCE BUCKET CAPACITY 1.8 yd3 1.4 m3
Boom/Stick Option (HEX) 1
BOOM/STICK OPTION (HEX) 1 Stick 9'9" (2960mm)
SHIPPING HEIGHT OF UNIT 10.1 ft in 3070 mm
SHIPPING LENGTH OF UNIT 33.3 ft in 10150 mm
MAX DIGGING DEPTH 22.4 ft in 6840 mm
MAX REACH ALONG GROUND 32.8 ft in 9990 mm
MAX CUTTING HEIGHT 33.2 ft in 10120 mm
MAX LOADING HEIGHT 23.5 ft in 7160 mm
MAX VERTICAL WALL DIGGING DEPTH 19.4 ft in 5910 mm
Boom/Stick Option (HEX) 2
BOOM/STICK OPTION (HEX) 2 Stick 11'10" (3610mm)
SHIPPING HEIGHT OF UNIT 10.3 ft in 3140 mm
SHIPPING LENGTH OF UNIT 33.5 ft in 10210 mm
MAX DIGGING DEPTH 24.6 ft in 7490 mm
MAX REACH ALONG GROUND 34.9 ft in 10640 mm
MAX CUTTING HEIGHT 34.5 ft in 10520 mm
MAX LOADING HEIGHT 24.7 ft in 7540 mm
MAX VERTICAL WALL DIGGING DEPTH 21.8 ft in 6630 mm
Dimensions
WIDTH TO OUTSIDE OF TRACKS 11.1 ft in 3390 mm
HEIGHT TO TOP OF CAB 9.9 ft in 3020 mm
GROUND CLEARANCE 1.5 ft in 460 mm
COUNTERWEIGHT CLEARANCE 3.6 ft in 1090 mm
TAIL SWING RADIUS 9.6 ft in 2940 mm
LENGTH OF TRACK ON GROUND 12.6 ft in 3840 mm
NOTE**: Before coming to look at a specific piece of equipment, please make an appointment. Depending on the piece it may be at a different location.
***View many other deals*** on the Q.U.E. Sales Inc website.
We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email, text or call me with your zip code!
We accept many different payment methods, contact us for further information!
We have several finance companies that we deal with. If you are interested, contact us for a credit application!
Thank you for viewing our equipment and have a great day!
Contact us with the information provided below.
Operating Weight (lbs): 54,654, A/C, Heater, Shipping Weight: 54,654, Engine Manufacturer: ISUZU, Engine Model: AH-4HK1XYSA-01
Information:
| Year | 2008 |
| Serial Number | FF01V1Q021171 |
| Stock Number | ZX240LC3 |
| Hours | 9,393 |
| Horse Power | 177 |
1