2004 SPEEDSTAR SS30K
Price:Call
Buy
2004 SPEEDSTAR SS30K
Used and New
Description:
•Mounted on a newer Peterbilt model 357 (6X4)
•Caterpillar Diesel engine 515 HP @1800 RPM
•20,000 LB front axle & 46,000 LB tandem rear axel
•2 fuel tanks - (1) 60 gal & (1) 135 gallon
•4 Hydraulic Leveling Jacks
•Rotary Tophead - Maximum torque of 70,000 in-lb
•Ajustable Jib Boom
•Pulldown - 25,000 lb | Holdback - 30,000 lb
•Winch on Mast
•Lubricator
•Sliding Breakout Table
•Breakout Wrench
•6 lights
•Sullair two-stage compressor - 1000 CFM / 350 PSI
•15 pieces of 4-1/2" X 20' flush-joint drillpipe 2-7/8 IF
•Casing table mounted below working table with 18" opening
•Other extras
•Located in the Eastern Region, USA
Repairs that where done to the rig recently (the rig with 10,458 hours):
1. Total hydraulic pump rebuilds in August of 2015.
2. Complete in frame done to rig motor in April of 2015.
3. Recently complete rebuilt 3x4 mission pump in December of 2015.
4. Installed new cotta box in October of 2014.
5. Pull back and hold back cables changed out in October of 2015.
6. Lower hydraulic hoses changed out in August of 2015.
7. All hydraulic controls in drillers panel replaced in June of 2015.
•Caterpillar Diesel engine 515 HP @1800 RPM
•20,000 LB front axle & 46,000 LB tandem rear axel
•2 fuel tanks - (1) 60 gal & (1) 135 gallon
•4 Hydraulic Leveling Jacks
•Rotary Tophead - Maximum torque of 70,000 in-lb
•Ajustable Jib Boom
•Pulldown - 25,000 lb | Holdback - 30,000 lb
•Winch on Mast
•Lubricator
•Sliding Breakout Table
•Breakout Wrench
•6 lights
•Sullair two-stage compressor - 1000 CFM / 350 PSI
•15 pieces of 4-1/2" X 20' flush-joint drillpipe 2-7/8 IF
•Casing table mounted below working table with 18" opening
•Other extras
•Located in the Eastern Region, USA
Repairs that where done to the rig recently (the rig with 10,458 hours):
1. Total hydraulic pump rebuilds in August of 2015.
2. Complete in frame done to rig motor in April of 2015.
3. Recently complete rebuilt 3x4 mission pump in December of 2015.
4. Installed new cotta box in October of 2014.
5. Pull back and hold back cables changed out in October of 2015.
6. Lower hydraulic hoses changed out in August of 2015.
7. All hydraulic controls in drillers panel replaced in June of 2015.
Information:
| Year | 2004 |
| Location | Mifflinburg, Pennsylvania |
| Stock Number | 12849 |
2002 SPEEDSTAR SS30K
Price:Call
Buy
2002 SPEEDSTAR SS30K
Used and New
Description:
•Mounted on a newer Peterbilt model 357 (6X4)
•Caterpillar Diesel engine 515 HP @1800 RPM
•20,000 LB front axle & 46,000 LB tandem rear axel
•2 fuel tanks - (1) 60 gal & (1) 135 gallon
•4 Hydraulic Leveling Jacks
•Rotary Tophead - Maximum torque of 70,000 in-lb
•Ajustable Jib Boom
•Pulldown - 25,000 lb | Holdback - 30,000 lb
•Winch on Mast
•Lubricator
•Sliding Breakout Table
•Breakout Wrench
•6 lights
•Sullair two-stage compressor - 1000 CFM / 350 PSI
•15 pieces of 4-1/2" X 20' flush-joint drillpipe 2-7/8 IF
•Casing table mounted below working table with 18" opening
•Other extras
•Located in the Eastern Region, USA
Repairs that where done to the rig recently (the rig with 10,458 hours):
1. Total hydraulic pump rebuilds in August of 2015.
2. Complete in frame done to rig motor in April of 2015.
3. Recently complete rebuilt 3x4 mission pump in December of 2015.
4. Installed new cotta box in October of 2014.
5. Pull back and hold back cables changed out in October of 2015.
6. Lower hydraulic hoses changed out in August of 2015.
7. All hydraulic controls in drillers panel replaced in June of 2015.
•Caterpillar Diesel engine 515 HP @1800 RPM
•20,000 LB front axle & 46,000 LB tandem rear axel
•2 fuel tanks - (1) 60 gal & (1) 135 gallon
•4 Hydraulic Leveling Jacks
•Rotary Tophead - Maximum torque of 70,000 in-lb
•Ajustable Jib Boom
•Pulldown - 25,000 lb | Holdback - 30,000 lb
•Winch on Mast
•Lubricator
•Sliding Breakout Table
•Breakout Wrench
•6 lights
•Sullair two-stage compressor - 1000 CFM / 350 PSI
•15 pieces of 4-1/2" X 20' flush-joint drillpipe 2-7/8 IF
•Casing table mounted below working table with 18" opening
•Other extras
•Located in the Eastern Region, USA
Repairs that where done to the rig recently (the rig with 10,458 hours):
1. Total hydraulic pump rebuilds in August of 2015.
2. Complete in frame done to rig motor in April of 2015.
3. Recently complete rebuilt 3x4 mission pump in December of 2015.
4. Installed new cotta box in October of 2014.
5. Pull back and hold back cables changed out in October of 2015.
6. Lower hydraulic hoses changed out in August of 2015.
7. All hydraulic controls in drillers panel replaced in June of 2015.
Information:
| Year | 2002 |
| Location | Mifflinburg, Pennsylvania |
| Stock Number | 12849 |
2004 SPEEDSTAR SS30K
[192057]
2004 SPEEDSTAR SS30K
East West Drilling, Inc.
Mifflinburg, Pennsylvania
Mifflinburg, Pennsylvania
2002 SPEEDSTAR SS30K
[192047]
2002 SPEEDSTAR SS30K
East West Drilling, Inc.
Mifflinburg, Pennsylvania
Mifflinburg, Pennsylvania
1