R105 GEHL Heavy sale in South Dakota

Engine
Make Yanmar
Model 3TNV88C-KMS
Tier IV
Gross Power @ 2500 rpm 25.5 hp
Net Power @ 2500 rpm 24.7 hp
Maximum Torque 80 ft.-lbs. @ 1680
Displacement 100 cu.in.

Hydraulic System
Auxiliary Hydraulics - Standard 14.5 gpm
High-Flow Auxiliary Hydraulics - Option N/A
Reservoir Capacity 8 gal.

Electrical System
Battery 12-volt
Starter 12-volt
Alternator 40-amp

Capacities/Weights
Rated Operating CapacityB 1,050 lbs.
Rated Operating Capacity with Optional CounterweightB 1,175 lbs.
Fuel Tank 10.4 gal.
Travel Speed - Maximum 5.9 mph
Travel Speed with Two-Speed Option - Maximum N/A
Operating WeightC - Approximate 4,000 lbs.
A - Overall width is dependent upon the amount of wheel offset.
B - Per SAE J818, SAE J732, and ISO 14397
C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.


Dimensions
Overall Operating Height - Fully Raised 139.6"
Height to Hinge Pin - Fully Raised 108.1"
Overall Height to Top of ROPS 70.3"
Overall Length with Bucket 114"
Dump Angle at Full Height 42°
Dump Height 84.5"
Dump Reach at Full Height 22.8"
Rollback at Ground 29°
Rollback Angle at Full Height 99°
Seat to Ground Height 32.6"
Wheelbase 34.5"
Overall Width - Less Bucket A 48.4"
Bucket Width 55"
Ground Clearance to Chassis 6.0"
Overall Length - Less Bucket 88.9"
Departure Angle 26°
Clearance Circle – Front w/ Bucket 69.4"
Clearance Circle – Front w/o Bucket 44.1"
Clearance Circle – Rear 54.1"
Standard Specification Tire Size 27x8.5x15 HD

The only non-standard option included on this skid loader is a bucket.

***Prices subject to change depending on Gehl's cash/finance programs

Year	2017
ROPS	Open