2015 GEHL RT210
2015 GEHL RT210
2016 GEHL RT210
2016 GEHL RT210
2017 GEHL RT210
Price:USD $48,195

Buy
2017 GEHL RT210
Used and New
Description:
Capacity
Operating Capacity at 35% Tipping Load 2,100 lbs.
Operating Capacity at 50% Tipping Load 3,000 lbs.
Tipping Load 6,000 lbs.
Operating Weight 9,890 lbs.
Engine
Make/Model Yanmar/4TNV98TCT-NMSL Tier IV
Type 4-Stroke Turbo
Displacement/Cylinders 203 cu.in./4
Gross Power @ rpm 72 hp @ 2500
Net Power @ rpm 70.7 hp @ 2500
Peak Torque @ rpm 206 ft.-lbs. @ 1700
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V/95A
Track Drives
Drawbar Pull/Tractive Effort 11,489 lbs.
Track Type/Track Rollers/Roller Type Rubber/5/Steel
Track Width 17.7"
Ground Pressure 4.7 psi
Forces
Bucket Breakout - Tilt Cylinder 6,631 lbs.
Bucket Breakout - Lift Cylinder 6,481 lbs.
Ground Speed - Single Speed 6.1 mph
Ground Speed - Two Speed 8.9 mph
Volume
Fuel Tank 24 gal.
Hydraulic Reservior Tank 13.8 gal.
Coolant Capacity 3.8 gal.
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed 21.8 gpm
Hight-Flow Hydraulic Flow - Rated Speed 35.9 gpm
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction
Electronic System
Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ 0°F
Dimensions
Overall Operating Height - Fully Raised 168"
Height to Hinge Pin - Fully Raised 128"
Reach - Fully Raised 34.5"
Dump Angle - Fully Raised 39°
Dump Height - Fully Raised 98"
Maximum Rollback Angle - Fully Raised 102.5°
Overall Height at ROPS 83.1"
Overall Length with Bucket - Standard Counterweight 148.1"
Overall Length without Bucket - Standard Counterweight 116.5"
Specified Height 67.7"
Reach at Specified Height 31.3"
Dump Angle at Specified Height 75°
Maximum Rollback Angle at Ground 30°
Carry Position 8.2"
Maximum Rollback Angle at Carry Position 31.6°
Digging Position - Below Ground +0.6"
Angle of Departure with Standard Counterweight 29.2°
Ground Clearance 13.2"
Track Gauge 51.7"
Track Shoe Width 17.7"
Crawler Base 58.4"
Overall Width - Less Bucket 69.5"
Bucket Width 73.9"
Clearance Radius - Front With Bucket 94.6"
Clearance Radius - Rear with Standard Counterweight 64.6"
Maximum Rollback at Specified Height 66.8°
Angle of Approach 90°
Grouser Height 1"
The only non-standard option included on this skid loader is a bucket.
***Prices subject to change depending on Gehl's cash/finance programs
Operating Capacity at 35% Tipping Load 2,100 lbs.
Operating Capacity at 50% Tipping Load 3,000 lbs.
Tipping Load 6,000 lbs.
Operating Weight 9,890 lbs.
Engine
Make/Model Yanmar/4TNV98TCT-NMSL Tier IV
Type 4-Stroke Turbo
Displacement/Cylinders 203 cu.in./4
Gross Power @ rpm 72 hp @ 2500
Net Power @ rpm 70.7 hp @ 2500
Peak Torque @ rpm 206 ft.-lbs. @ 1700
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V/95A
Track Drives
Drawbar Pull/Tractive Effort 11,489 lbs.
Track Type/Track Rollers/Roller Type Rubber/5/Steel
Track Width 17.7"
Ground Pressure 4.7 psi
Forces
Bucket Breakout - Tilt Cylinder 6,631 lbs.
Bucket Breakout - Lift Cylinder 6,481 lbs.
Ground Speed - Single Speed 6.1 mph
Ground Speed - Two Speed 8.9 mph
Volume
Fuel Tank 24 gal.
Hydraulic Reservior Tank 13.8 gal.
Coolant Capacity 3.8 gal.
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed 21.8 gpm
Hight-Flow Hydraulic Flow - Rated Speed 35.9 gpm
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction
Electronic System
Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ 0°F
Dimensions
Overall Operating Height - Fully Raised 168"
Height to Hinge Pin - Fully Raised 128"
Reach - Fully Raised 34.5"
Dump Angle - Fully Raised 39°
Dump Height - Fully Raised 98"
Maximum Rollback Angle - Fully Raised 102.5°
Overall Height at ROPS 83.1"
Overall Length with Bucket - Standard Counterweight 148.1"
Overall Length without Bucket - Standard Counterweight 116.5"
Specified Height 67.7"
Reach at Specified Height 31.3"
Dump Angle at Specified Height 75°
Maximum Rollback Angle at Ground 30°
Carry Position 8.2"
Maximum Rollback Angle at Carry Position 31.6°
Digging Position - Below Ground +0.6"
Angle of Departure with Standard Counterweight 29.2°
Ground Clearance 13.2"
Track Gauge 51.7"
Track Shoe Width 17.7"
Crawler Base 58.4"
Overall Width - Less Bucket 69.5"
Bucket Width 73.9"
Clearance Radius - Front With Bucket 94.6"
Clearance Radius - Rear with Standard Counterweight 64.6"
Maximum Rollback at Specified Height 66.8°
Angle of Approach 90°
Grouser Height 1"
The only non-standard option included on this skid loader is a bucket.
***Prices subject to change depending on Gehl's cash/finance programs
Information:
Year | 2017 |
ROPS | Open |
1