2011 TAKEUCHI TL220
Price:USD $22,000
Buy
2011 TAKEUCHI TL220
Used and New
Description:
2011 TAKEUCHI TL220 SKID STEER TRACK LOADER, NEW 51 HP MOTOR WITH WARRANTY TILL 11/2017, 2-SPEED, AUX HYDRAULICS, POWER FOR ANY SIZE JOB, WITH ONLY 1692 HOURS!
This Takeuchi TL220 is equipped with a 51 hp powerhouse new replacement motor with a 1 year warranty. It has a sturdy all welded frame and a heavy duty oversized undercarriage. This machine has an operating weight of 6315 lbs, and has a tipping load of 3549 lbs. It can power through the most difficult material with ease.
Power and maneuverability make this TL220 the right choice for any size job.
LET US PUT YOU IN A TAKEUCHI TL220 TODAY!
CLEAN AND READY TO WORK!
“FINANCING AVAILABLE”
PLEASE CALL US WITH ANY QUESTIONS!
YEAR: 2011
Make: Takeuchi
Model: TL220
Skid Steer
Track Loader
HP: 51
Aux Hyd.
CLEAN AND READY TO WORK!
“FINANCING AVAILABLE”
PLEASE CALL US WITH ANY QUESTIONS!
OPERATING PERFORMANCE
Operating Weight (w 165 lb operator): Canopy 6,315 lb
Tipping Load: 3,549 lb
ENGINE
New Factory Replacement Motor
Make: Yanmar
Model: 4TNV84-Turbo
Cylinders/Displacement: 4/121.7 cu in (2.0 L)
Horsepower Gross: 53.5 hp
Horsepower Net: 51.2 hp
Rated Engine Speed: 2,800 rpm
Maximum Torque: 120 ft-lb @ 2,000rpm
Engine Lubrication: 7.8 qt
Cooling System: 11.6 qt
Fuel Tank Capacity: 15.1 gal
Fuel Consumption: 2 gal/hr
Electrical System: 12 volts / 40 amps
Warranty on Motor: Till 11/2017
UNDERCARRIAGE
Traction Drive Type:
Hydrostatic drive system with double reduction planetary final drive
Parking Brake:
Spring applied, hydraulically released, multiple wet friction disk
Track Roller Type:
Large, outside running, permanently sealed rollers with precision material face seals
Track Rollers (per side): 4
Track Width: 11.8 in
Track Ground Contact Length: 4 ft 0 in
Ground Pressure (psi): 5.0
Maximum Travel Speed:
Low Range: 4.0 mph
High Range: 5.8 mph
HYDRAULIC SYSTEM
Hydraulic Reservoir Capacity: 7.7 gal
Hydraulic System Capacity: 11.9 gal
Auxiliary Hydraulic Flow: 15 gal/min
Auxiliary Hydraulic Pressure: 3,000 psi
DIMENSIONS
Front Clearance Radius with Bucket: 6 ft 6 in
Rear Clearance Radius: 4 ft 9.9 in
Angle of Departure: 30 degrees
Maximum Lift Height to Bucket Pin: 9 ft 6 in
Dump Height Fully Raised: 7 ft 4.6 in
Maximum Dump Angle Fully Raised: 41 degrees
Maximum Bucket Rollback at Ground Level: 30 degrees
Reach Fully Raised: 23.1 in (590 mm)
Overall Width Without Bucket: 4 ft 9.9 in
Recommended Bucket Width: 4 ft 11.5 in
Overall Height: 6 ft 5.6 in
Overall Length with Bucket: 10 ft 7.9 in
Minimum Ground Clearance: 9.8 in
Travel Speed: 4, Travel Speed - 2-speed option: 6, Bucket Size: 13, Ground Clearance: 10, Operating Weight: 6,315, Height to Top of ROPS: 78, Engine Manufacturer: YANMAR, Engine Model: 4TNV84T, Length with Bucket: 128, Fuel Capacity: 15
This Takeuchi TL220 is equipped with a 51 hp powerhouse new replacement motor with a 1 year warranty. It has a sturdy all welded frame and a heavy duty oversized undercarriage. This machine has an operating weight of 6315 lbs, and has a tipping load of 3549 lbs. It can power through the most difficult material with ease.
Power and maneuverability make this TL220 the right choice for any size job.
LET US PUT YOU IN A TAKEUCHI TL220 TODAY!
CLEAN AND READY TO WORK!
“FINANCING AVAILABLE”
PLEASE CALL US WITH ANY QUESTIONS!
YEAR: 2011
Make: Takeuchi
Model: TL220
Skid Steer
Track Loader
HP: 51
Aux Hyd.
CLEAN AND READY TO WORK!
“FINANCING AVAILABLE”
PLEASE CALL US WITH ANY QUESTIONS!
OPERATING PERFORMANCE
Operating Weight (w 165 lb operator): Canopy 6,315 lb
Tipping Load: 3,549 lb
ENGINE
New Factory Replacement Motor
Make: Yanmar
Model: 4TNV84-Turbo
Cylinders/Displacement: 4/121.7 cu in (2.0 L)
Horsepower Gross: 53.5 hp
Horsepower Net: 51.2 hp
Rated Engine Speed: 2,800 rpm
Maximum Torque: 120 ft-lb @ 2,000rpm
Engine Lubrication: 7.8 qt
Cooling System: 11.6 qt
Fuel Tank Capacity: 15.1 gal
Fuel Consumption: 2 gal/hr
Electrical System: 12 volts / 40 amps
Warranty on Motor: Till 11/2017
UNDERCARRIAGE
Traction Drive Type:
Hydrostatic drive system with double reduction planetary final drive
Parking Brake:
Spring applied, hydraulically released, multiple wet friction disk
Track Roller Type:
Large, outside running, permanently sealed rollers with precision material face seals
Track Rollers (per side): 4
Track Width: 11.8 in
Track Ground Contact Length: 4 ft 0 in
Ground Pressure (psi): 5.0
Maximum Travel Speed:
Low Range: 4.0 mph
High Range: 5.8 mph
HYDRAULIC SYSTEM
Hydraulic Reservoir Capacity: 7.7 gal
Hydraulic System Capacity: 11.9 gal
Auxiliary Hydraulic Flow: 15 gal/min
Auxiliary Hydraulic Pressure: 3,000 psi
DIMENSIONS
Front Clearance Radius with Bucket: 6 ft 6 in
Rear Clearance Radius: 4 ft 9.9 in
Angle of Departure: 30 degrees
Maximum Lift Height to Bucket Pin: 9 ft 6 in
Dump Height Fully Raised: 7 ft 4.6 in
Maximum Dump Angle Fully Raised: 41 degrees
Maximum Bucket Rollback at Ground Level: 30 degrees
Reach Fully Raised: 23.1 in (590 mm)
Overall Width Without Bucket: 4 ft 9.9 in
Recommended Bucket Width: 4 ft 11.5 in
Overall Height: 6 ft 5.6 in
Overall Length with Bucket: 10 ft 7.9 in
Minimum Ground Clearance: 9.8 in
Travel Speed: 4, Travel Speed - 2-speed option: 6, Bucket Size: 13, Ground Clearance: 10, Operating Weight: 6,315, Height to Top of ROPS: 78, Engine Manufacturer: YANMAR, Engine Model: 4TNV84T, Length with Bucket: 128, Fuel Capacity: 15
Information:
| Year | 2011 |
| Location | Trinidad, Texas |
| ROPS | Open |
| Hours | 1,692 |
| Operating Capacity | 1,246 lb |
| Serial Number | 222000195 |
| Horse Power | 51 |
1