LT1213S METSO Heavy sale in Wisconsin


METSO LT1213S

Price:Call
METSO LT1213S
Buy METSO LT1213S Used and New
Company:
RB SCOTT CO INC  
Eau Claire, Wisconsin
+1 715-631-7043
http://www.rbscott.net/
Date: 12-Nov-2016
[223942]
Description:
Feeding Unit:
Feeding Unit – Pan Feeder and scalper
The scalper is equipped with 2 grizzly sections
Horizontal feeder maximizes the overall production through the efficient removal of fines from the feed material
1st Grizzly – ZigZag 38mm (2”)
Upper grizzly
2nd Grizzly – ZigZag 38mm (1 ½”)
Lower grizzly
Screen Deck Media – Steel cloth 35mm (1 3/8”)
Screen media to separate fines from feed and guide them to side conveyor. Screen mesh is mounted under the grizzlies
Feed Hopper – Extended 9 m³ (12yrd³)
Increases the volume of the standard feed hopper. Enables the loading either with an excavator or wheel loader and is made of wear resistant steel
Side walls are folded down for the transport
Feed hopper side walls are hydraulic operated and locked
No tools required for set up
Side Conveyor – Included (H5-4)
Belt conveyor for transporting the fine material to the left or right hand side of the Lokotrack
The side conveyor is equipped with hydraulic drive and safety trip wires on both sides of the conveyor
Belt conveyor for transporting the fine material to the side of the Lokotrack
The side conveyor is equipped with hydraulic drive and stop buttons both sides of the conveyor
The folding and lengthening of side conveyor is hydraulic

Crusher:
Crusher – Impact crusher NP1213M
NP1213M impact crusher is part of the NP series horizontal shaft impact crusher range
This range features a unique combination of heavy rotor design, wear material and crushing chamber design
The design minimizes maintenance time and improves all adjustment operations
NP series impact crushers deliver unbeatable performance in primary, and recycling applications
Hammers – Martensitic Xwin
Metal Matric Composite (MMC) blow bars with ceramic particles on wear surface and martensitic steel insert
Suitable for general quarry and recycling applications
Belt Protection Plate – Included
On the fixed jaw side a plate is mounted to guide the crushed recycling material together with steel parts onto the main conveyor and to protect the belt conveyor
Hydraulic Assistance
Crusher setting adjusted and setting shown on IC display
Hydraulic assistance for setting adjustment
Service Hoist – Included
Lifting device for changing the crusher wear parts
Transported separately in one piece

Power Unit:
Diesel Engine – CAT C13
Highly powerful and fuel efficient diesel engine
Emission Class – Tier 4F
Tier 4 Final (stage IV) emission regulated engine
Climate Kit – Standard (-20C/-4F...35C/95F)


Main Conveyor:
Main Conveyor – Standard
Discharge Height: 2800 mm (9 ft 2 in)
Length: 11 m (36 ft 4 in)
Belt Width: 1200 mm (47 in)
Belt Speed: 2 m/s (6,6 ft/s)
Hydraulic Motor Drive
Belt conveyor for transporting the crushed material from the crusher to the discharge point
The conveyor is equipped with discharge hood, hydraulic drive and emergency stop wires on both sides of the conveyor
Magnetic Separator – Master Magnet
Permanent self-cleaning magnet to remove the iron waste from the crushed material

Screening Unit:
Screening Unit – 5’x12’
Screen module TK13-30S with H5-10 return conveyor
Horizontal single deck, single shaft screen
Steel wire and rubber screen clothes available
Screen Media - Steel cloth 40 mm (1 37/64")

Optional Equipment:
Interlocking – Included
Secondary unit material level will control the feeding of primary unit
Hydraulic Power Take Off – Included
For connecting the auxiliary hydraulic equipment to the hydraulic system of the Lokotrack
Water Spraying System – Included
For binding dust particles at the crusher cavity, under the crusher and at the discharge end of main conveyor
Remote Radio Control – Included (US / 458Mhz)
Remote radio controller for the main functions
Enables the remote control of following functions: start/stop of feeder unit, rpm adjustment of diesel engine, moving forward/reverse (tracks)
Cable controller is always supplied with Lokotrack
Halogen Lights

Finishing:
Color – Metso Beige
Safety Labels – ANSI

Documentation:
Quantity of Printed Manuals – 1
Information:
Location Eau Claire, Wisconsin
Stock Number 760
Serial Number 78704
METSO LT1213S
[223942]
METSO LT1213S
METSO LT1213S
RB SCOTT CO INC
Eau Claire, Wisconsin


1 
Back to top