CEDARAPIDS CRH1313R
Price:Call
Buy
CEDARAPIDS CRH1313R
Used and New
Description:
STANDARD FEATURES
•IP1313 horizontal shaft impact crusher
•• Hydraulically opened frame and apron adjustment
•• High inertia 50” (1270 mm) diameter, 48” (1219 mm) wide
•3-bar rotor with patented center pull wedge system
•• Feed chute chain curtain
•• Gas hydraulic power unit for crusher open and apron adjust
•450 hp (335 kW) Tier 4 Final Cummins diesel engine
•• Coupled to crusher with low maintenance fluid coupler
•200 hp (150 kW) generator and removable electrical panel with
•controls for all on-plant conveyors and vibratory equipment
•• Panel includes controls for two 25 hp (19 kW) off-plant
•conveyors (includes plugs and receptacles)
•Vibrating grizzly feeder, 48” x 16′ (1219 x 4877 mm); 25 hp (19 kW)
•• Straight 5′ (1524 mm) long bolt-in adjustable grizzly bars
•• 1/2” (13 mm) AR400 replaceable bolt-on side and floor liners
•• 5/8” (16 mm) AR400 hopper
•• Bypass chute diverts grizzly fines to undercrusher pan feeder
•Wireless remote control for feeder with backup remote (on/off
•and speed control)
•Removable feeder module
•Screen, conveyors and magnet option move hydraulically into
•and out of transport position (patent pending)
•Triple axle suspension with 295/75 R22.5 tires
•Undercrusher 36” x 96” (914 x 2438 mm) high-stroke pan feeder
•• Collects high impact crusher discharge and grizzly fines,
•reducing conveyor maintenance
•• Dual 5 hp (3.7 kW) motors provide high energy feeder motion
•Inclined screen, 5′ x 16′ (1524 x 4877 mm) two-deck, 15 hp (11 kW)
•• Steeper top deck for improved scalping performance
•• 17° top deck, 15° bottom deck
•• Both decks can recirculate to crusher or discharge off plant
•48” (1219 mm) screen feed conveyor, 20 hp (15 kW)
•42” (1067 mm) fines conveyor, 7.5 hp (5.6 kW)
•Two 24” (610 mm) reversible cross conveyors, 5 hp (3.7 kW)
•24” (610 mm) return conveyor, 10 hp (7.5 kW)
•All conveyors include vulcanized 3-ply belts, CEMA C class
•rollers, rubber disc return rolls, and side guide rolls
•Easy maintenance features:
•• Service platforms by crusher, engine, and screen sides
•• Ratchet adjust crusher drive
•• Conveniently located grease banks
•• Pivoting screen base for easy access to screen wire
•300 gallon (1135 liter) fuel tank allows over 10 hours of run-time
•Four hydraulic leveling jacks with adjustable rear drop down
•support legs
•Lockable 4′ (1219 mm) long side mounted storage box.
•IP1313 horizontal shaft impact crusher
•• Hydraulically opened frame and apron adjustment
•• High inertia 50” (1270 mm) diameter, 48” (1219 mm) wide
•3-bar rotor with patented center pull wedge system
•• Feed chute chain curtain
•• Gas hydraulic power unit for crusher open and apron adjust
•450 hp (335 kW) Tier 4 Final Cummins diesel engine
•• Coupled to crusher with low maintenance fluid coupler
•200 hp (150 kW) generator and removable electrical panel with
•controls for all on-plant conveyors and vibratory equipment
•• Panel includes controls for two 25 hp (19 kW) off-plant
•conveyors (includes plugs and receptacles)
•Vibrating grizzly feeder, 48” x 16′ (1219 x 4877 mm); 25 hp (19 kW)
•• Straight 5′ (1524 mm) long bolt-in adjustable grizzly bars
•• 1/2” (13 mm) AR400 replaceable bolt-on side and floor liners
•• 5/8” (16 mm) AR400 hopper
•• Bypass chute diverts grizzly fines to undercrusher pan feeder
•Wireless remote control for feeder with backup remote (on/off
•and speed control)
•Removable feeder module
•Screen, conveyors and magnet option move hydraulically into
•and out of transport position (patent pending)
•Triple axle suspension with 295/75 R22.5 tires
•Undercrusher 36” x 96” (914 x 2438 mm) high-stroke pan feeder
•• Collects high impact crusher discharge and grizzly fines,
•reducing conveyor maintenance
•• Dual 5 hp (3.7 kW) motors provide high energy feeder motion
•Inclined screen, 5′ x 16′ (1524 x 4877 mm) two-deck, 15 hp (11 kW)
•• Steeper top deck for improved scalping performance
•• 17° top deck, 15° bottom deck
•• Both decks can recirculate to crusher or discharge off plant
•48” (1219 mm) screen feed conveyor, 20 hp (15 kW)
•42” (1067 mm) fines conveyor, 7.5 hp (5.6 kW)
•Two 24” (610 mm) reversible cross conveyors, 5 hp (3.7 kW)
•24” (610 mm) return conveyor, 10 hp (7.5 kW)
•All conveyors include vulcanized 3-ply belts, CEMA C class
•rollers, rubber disc return rolls, and side guide rolls
•Easy maintenance features:
•• Service platforms by crusher, engine, and screen sides
•• Ratchet adjust crusher drive
•• Conveniently located grease banks
•• Pivoting screen base for easy access to screen wire
•300 gallon (1135 liter) fuel tank allows over 10 hours of run-time
•Four hydraulic leveling jacks with adjustable rear drop down
•support legs
•Lockable 4′ (1219 mm) long side mounted storage box.
Information:
| Horsepower | 450 |
1