Gehl R150, Construction
Price:24,500

Buy
Gehl R150, Construction
Used and New
Information:
Category | Skid Steer Loaders |
Year | 2015 |
Serial Number | GHL0R150A00195310 |
Location | United States, Sioux Falls, SD |
Catalog | CU4503028 |
2016 GEHL R150
Price:USD $30,000

Buy
2016 GEHL R150
Used and New
Description:
This unit is still in my active rental fleet. Hours, condition, and availability subject to change.
Auxiliary Hydraulics, Quick Attach
Auxiliary Hydraulics, Quick Attach
Information:
Year | 2016 |
Serial Number | GHLOR150A0D195640 |
ROPS | Open |
Hours | 505 |
2016 GEHL R150
Price:USD $22,950

Buy
2016 GEHL R150
Used and New
Description:
Gehl Hand Controls, 46HP Yanmar Diesel Engine, 10 x 16.5 Tires, 1500 Lift Capacity, Standard Hydraulics, Cab, Heat, Single Speed, Power Q-Tach, Counter Weight, Suspension Seat
Information:
Year | 2016 |
Serial Number | 5410 |
Stock Number | 1204 |
ROPS | Open |
Hours | 1,835 |
2017 GEHL R150
Price:USD $27,250

Buy
2017 GEHL R150
Used and New
Description:
Engine
Make Yanmar
Model 4TNV88C-KMS
Tier IV
Gross Power @ 2500 rpm 46.3 hp
Net Power @ 2500 rpm 44.5 hp
Maximum Torque 107.8 ft.-lbs. @ 1820
Displacement 133.6 cu.in.
Hydraulic System
Auxiliary Hydraulics - Standard 17 gpm
High-Flow Auxiliary Hydraulics - Option N/A
Reservoir Capacity 11 gal.
Electrical System
Battery 12-volt
Starter 12-volt
Alternator 100-amp
Capacities/Weights
Rated Operating CapacityB 1,500 lbs.
Rated Operating Capacity with Optional CounterweightB 1,650 lbs.
Fuel Tank 16.5 gal.
Travel Speed - Maximum 7.4 mph
Travel Speed with Two-Speed Option - Maximum N/A
Operating WeightC - Approximate 5,930 lbs.
A - Overall width is dependent upon the amount of wheel offset.
B - Per SAE J818, SAE J732, and ISO 14397
C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.
Dimensions
Overall Operating Height - Fully Raised 152.6"
Height to Hinge Pin - Fully Raised 119"
Overall Height to Top of ROPS 76.7"
Overall Length with Bucket 122.1"
Dump Angle at Full Height 38°
Dump Height 93.7"
Dump Reach at Full Height 22.8"
Rollback at Ground 28°
Rollback Angle at Full Height 99°
Seat to Ground Height 35.6"
Wheelbase 38.9"
Overall Width - Less Bucket A 63.2"
Bucket Width 61.5"
Ground Clearance to Chassis 6.3"
Overall Length - Less Bucket 93.9"
Departure Angle 21°
Clearance Circle – Front w/ Bucket 73.6"
Clearance Circle – Front w/o Bucket 45.4"
Clearance Circle – Rear 57.7"
Standard Specification Tire Size 10.00 x 16.5 HD
The only non-standard option included on this skid loader is a bucket.
***Prices subject to change depending on Gehl's cash/finance programs
Make Yanmar
Model 4TNV88C-KMS
Tier IV
Gross Power @ 2500 rpm 46.3 hp
Net Power @ 2500 rpm 44.5 hp
Maximum Torque 107.8 ft.-lbs. @ 1820
Displacement 133.6 cu.in.
Hydraulic System
Auxiliary Hydraulics - Standard 17 gpm
High-Flow Auxiliary Hydraulics - Option N/A
Reservoir Capacity 11 gal.
Electrical System
Battery 12-volt
Starter 12-volt
Alternator 100-amp
Capacities/Weights
Rated Operating CapacityB 1,500 lbs.
Rated Operating Capacity with Optional CounterweightB 1,650 lbs.
Fuel Tank 16.5 gal.
Travel Speed - Maximum 7.4 mph
Travel Speed with Two-Speed Option - Maximum N/A
Operating WeightC - Approximate 5,930 lbs.
A - Overall width is dependent upon the amount of wheel offset.
B - Per SAE J818, SAE J732, and ISO 14397
C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.
Dimensions
Overall Operating Height - Fully Raised 152.6"
Height to Hinge Pin - Fully Raised 119"
Overall Height to Top of ROPS 76.7"
Overall Length with Bucket 122.1"
Dump Angle at Full Height 38°
Dump Height 93.7"
Dump Reach at Full Height 22.8"
Rollback at Ground 28°
Rollback Angle at Full Height 99°
Seat to Ground Height 35.6"
Wheelbase 38.9"
Overall Width - Less Bucket A 63.2"
Bucket Width 61.5"
Ground Clearance to Chassis 6.3"
Overall Length - Less Bucket 93.9"
Departure Angle 21°
Clearance Circle – Front w/ Bucket 73.6"
Clearance Circle – Front w/o Bucket 45.4"
Clearance Circle – Rear 57.7"
Standard Specification Tire Size 10.00 x 16.5 HD
The only non-standard option included on this skid loader is a bucket.
***Prices subject to change depending on Gehl's cash/finance programs
Information:
Year | 2017 |
ROPS | Open |
2015 GEHL R150
Price:USD $27,900
Buy
2015 GEHL R150
Used and New
Description:
Stk #:S43465, ROPS, T bar, air seat, 27X10, 50X15 tires, 66" bucket
Information:
Year | 2015 |
Stock Number | S43465 |
ROPS | Open |
Hours | 50 |
Gehl R150, Construction
Skid Steer Loaders
[1854960]
Gehl R150, Construction
BUTLER MACHINERY COMPANY
1