2005 INERTIA 5066 FALCON
Price:USD $250,000
Buy
2005 INERTIA 5066 FALCON
Used and New
Description:
CHASSIS
The chassis is constructed with W21 x 62 pound I-beam main frame rails. It has a heavy duty impactor
mount with both weld in and bolt on wear liners. The chassis also has an integrated grizzly bypass chute
to allow finer material to fall through the grizzly section of the feeder and to the discharge area of the
machine. Four 36” stroke hydraulic legs with 12volt pump are used to raise and level the plant for
operation. The plant comes equipped with king pin and a heavy duty triple axle suspension with 11 x 22.5
tires, air brakes, lights, and mud flaps.
FEEDER
The feeder is an Inertia 60” x 20’ vibrating grizzly consisting of heavy channel and plate construction. It
has ½” weld in floor and side liners and a 4’ long grizzly bar section with 5” nominal spacing. The feeder
uses two Invicta BL 75-150 vibrating motors along with a slight decline in angle to feed the impactor.
HOPPER
The hopper is removable and is 9’ wide x 20’ long, 16 cubic yards non-heaping. It is constructed of 5/8”
plate and has a heavy-duty bolt on chain curtain to prevent material blow back from impactor.
IMPACTOR
The impactor is an Inertia 5066 HSI (50” diameter x 65” wide) single rotor impact crusher with
sectionalized frame construction of both welded and bolted heavy plate steel. It has replaceable frame
liners of HARDOX-400 material with a wear resistant steel rotor and cast replaceable blow bars. The
impactor has two adjustable breaker plates lined with HARDOX-400 material to control product
graduation and a spring relief system for non-crushable material. It incorporates self-aligning spherical
roller bearings and 4 bolt, split pillow blocks which are protected from dust contamination via a nonrupturable
labyrinth seal. It has four access doors for internal observation, inspection, maintenance, and
repair.
POWER/DRIVE
The plant is powered by a Diesel engine that belt drives the impactor The belt
drive has a fully enclosed guard with two service doors.
The chassis is constructed with W21 x 62 pound I-beam main frame rails. It has a heavy duty impactor
mount with both weld in and bolt on wear liners. The chassis also has an integrated grizzly bypass chute
to allow finer material to fall through the grizzly section of the feeder and to the discharge area of the
machine. Four 36” stroke hydraulic legs with 12volt pump are used to raise and level the plant for
operation. The plant comes equipped with king pin and a heavy duty triple axle suspension with 11 x 22.5
tires, air brakes, lights, and mud flaps.
FEEDER
The feeder is an Inertia 60” x 20’ vibrating grizzly consisting of heavy channel and plate construction. It
has ½” weld in floor and side liners and a 4’ long grizzly bar section with 5” nominal spacing. The feeder
uses two Invicta BL 75-150 vibrating motors along with a slight decline in angle to feed the impactor.
HOPPER
The hopper is removable and is 9’ wide x 20’ long, 16 cubic yards non-heaping. It is constructed of 5/8”
plate and has a heavy-duty bolt on chain curtain to prevent material blow back from impactor.
IMPACTOR
The impactor is an Inertia 5066 HSI (50” diameter x 65” wide) single rotor impact crusher with
sectionalized frame construction of both welded and bolted heavy plate steel. It has replaceable frame
liners of HARDOX-400 material with a wear resistant steel rotor and cast replaceable blow bars. The
impactor has two adjustable breaker plates lined with HARDOX-400 material to control product
graduation and a spring relief system for non-crushable material. It incorporates self-aligning spherical
roller bearings and 4 bolt, split pillow blocks which are protected from dust contamination via a nonrupturable
labyrinth seal. It has four access doors for internal observation, inspection, maintenance, and
repair.
POWER/DRIVE
The plant is powered by a Diesel engine that belt drives the impactor The belt
drive has a fully enclosed guard with two service doors.
Information:
| Year | 2005 |
2015 INERTIA 5066 FALCON
Price:Call
Buy
2015 INERTIA 5066 FALCON
Used and New
Description:
FOR SALE
2015 Inertia Falcon 5066 Impactor
Includes separate discharge conveyor with vibrating pan feeder and magnet.
One owner. Well-maintained. Newer chamber liners.
4-axle
Excellent crushing system for recycled concrete
2015 Inertia Falcon 5066 Impactor
Includes separate discharge conveyor with vibrating pan feeder and magnet.
One owner. Well-maintained. Newer chamber liners.
4-axle
Excellent crushing system for recycled concrete
Information:
| Year | 2015 |
| Hours | 1,600 |
2005 INERTIA 5066 FALCON
[744867]
2005 INERTIA 5066 FALCON
Hard Rock Equipment & Rental LLC
Freeport, Illinois 61032
Freeport, Illinois 61032
1