28102S MANITEX Heavy sale in United States

2006 Manitex 28102S
30' - 102' Four Section Full Power Boom
26’-46' Fixed Jib
9/16" Wire Rope
Enclosed Cab
Single Axis Joysticks
Single Sheave Block
Ball
Load Moment Indicator with Anti-Two Block
Hydraulic Oil Cooler
Continuous Rotation
Mounted on 2006 Sterling LT7500
65,880 Miles
7,181 Engine Hours
60,000 GVW
CAT C-7 Diesel Engine (300HP)
Fuller 8LL Manual Transmission

Year	2006
Stock Number	RS-151
Lift Capacity	28 tn
Hours	7,181

2007 Manitex 28102S- 2006 Sterling LT7501 Boom Truck, CB&J#876,

30' - 102' Four Section Full Power Boom,
26' - 46’ Swing Away 2-section Jib,
Main Winch 9/16" wire rope,
PAT DS85 Load Moment Indicator and Anti-Two Block and overload kick-out,
7 Ton McKissick hook ball,
Single axis joystick controls,
360 Degree Continuous rotation,
After Market Opt. Cab,
New Cat 300hp C7 Diesel Engine with 112 hours,
733 miles since engine was replaced,
Eaton Fuller 10-speed manual transmission,
A/C in truck cab,
Air-ride driver's seat in truck cab,
Propane heater,
Diamond plate steel deck,
Rigging boxes and mat storage bins,
Pentle hook,
Front Tires: 425/65R 22.5 with approximately 60% left at 6.2017,
Rear Tires: 11R22.5 with approximately 40% - 60% remaining as of 6.2017,
Front and Rear 3 position out and down outriggers ,
Cosmetic Condition: paint, sheet metal and glass are good.
Recent Repairs: Replaced engine, 30 months, 28,000 miles left on warranty.
Seller will recertify crane as condition of sale.

Year	2007
Serial Number	126369
Stock Number	876
Lift Capacity	28 tn
Hours	112

2006-2005 Manitex-Sterling 28102S Boom Truck, CB&J#843,

30' - 102' Four Section Full Power Boom,
26' Fixed Jib,
Main Winch 9/16" Wire Rope,
Load Moment Indicator with Anti-Two Block,
12.5 Ton Single Sheave Hook Block,
7 Ton Hook Ball,
Rider Seat,
Single Axis Joystick Controls,
A/C (Not Working),
Cruise Control,
Tilt Steering,
Continuous rotation,
Boom Rest,
Rear Mounted with a rider seat on a 2005 Sterling LT7500 Three Axle Truck,
Caterpillar 300hp C7 Diesel Engine (In-Frame Overhaul, 2017),
10 Speed Manual Transmission,
14' Wood Deck,
Rigging Boxes (X2),
Alcoa Aluminum Rims,
Front Tires: 425/65R22.5 with new tires as of 3.2017,
Rear Tires: 11R22.5 with 50% - 80% Remaining as of 3.2017,
Front and Rear Out and Down Outriggers ,
Crane is set up for a 5th front outrigger,
Cosmetic Condition: new paint, sheet metal and glass are good.
Recent Repairs: New clutch and radiator, engine in-frame overhaul (2017), $10,000 in repairs.
Certification: Annual due 6.2017, Quad due 7.2018,
One Owner Crane!
Contact: Casey Dennehy 949.275.7167

Year	2006
Serial Number	122336
Stock Number	843
Lift Capacity	28 tn
Hours	16,196

Used Manitex 28102S mounted to 2006 Sterling LT7500 chassis

CRANE
• 28 ton capacity rating.
• Manitex 28102S s/n 122336 – 15,900 hrs. approx
• Ride Around Operator’s Seat Controls
• Front Out and Down Outriggers
• Rear Out and Down Outriggers
• 4 Section boom – 102’ Telescoping Boom
• 3 section pump
• Two speed winch
• Oil Cooler
• Engine Start/Stop
• Anti two block
• Heavy duty 20 foot body
• Single sheave load block

TRUCK CHASSIS
• 2006 Sterling LT7500 – VIN #2F2HATDC06AM23375
• CAT 300 hp diesel engine
• 10 speed Manual Transmission
• 60,000 lb GVW
• Front Axle: 20,000 lb.
• Rear Axle: 40,000 lb.
• 60 Gallon fuel tank
• 2 Underdeck T ool boxes
• Heater, defroster, and A/C
• Air brakes
• Painted White
• Pintle hitch with air & electrical to the rear
• Miles: 215,000 approx.

Year	2006
Serial Number	122336
Stock Number	UT-535
Lift Capacity	28 tn
Hours	16,152

One owner, 2008 Manitex 28102S, mounted 2007 Sterling. 75,370 miles, 5900 hours. Severe duty cab. Reman C-7 300 HP from Cat (32,235 miles/2800 hours) on engine installed 8/15. 14 month warranty left on engine. New Clutch, AC/Heat in upper bronze safety glass in top hatch, new hydraulic pump, 32-46 ft. jib, ball and 15 ton block, new cable, 2 tool boxes, racks for out rigger cribling, 9spd trans, tires 85% to new, back up camera, two 60 gal fuel tanks. $175,000

Year	2008
Serial Number	150256
Hours	5,900
Horsepower	300