MASABA 48 IN
Price:USD $182,115
Buy
MASABA 48 IN
Used and New
Description:
Masaba Unloader
Load area
• Grate – Heavy duty construction of 10’ x 5’ outside dimension
• Construction – Heavy duty flat bar construction
• Self-Cleaning ramp - Hinge on each side of grate
• Ramp bulkhead - 10’ wide by 5’ long, folds for road transport – Heavy duty hinge
Chassis
• Construction - Welded steel tube
• Axle - Tandem walking beam with dual (8) 11 x 22.5R tires
• Landing jacks – crank down
• Road portable package – Includes: 5th wheel hitch, brakes, lights, and mud flaps
Discharge Conveyor
• Size - 48” BW
• Undercarriage - Hydraulic raise and lower (discharge height of 11’)
• Frame - Channel frame
• Drive - Dual head drive
• Gear reducer – Dual class II reducers with tapered bushings
• Motors – (2) 25 HP 1800 RPM
• V- belt drive – (2) with drive guard
• Capacity – 1,000 STPH at 100 PCF material, 1.5” minus
• Belt speed - 225 FPM
• Flow control - Adjustable slide gate
• Discharge hood – with AR liner
• Loading area idlers - 5 “ dia. live shaft idlers and pillow block bearings
• Troughing idlers - CEMA C, Precision, 5" dia. rolls, 35 deg. trough, sealed ball bearings, 3.5' spacing
• Return idlers - CEMA C, Precision, 4" dia. rolls, rubber disc return, sealed, 10' spacing
• Drive pulley - Heavy duty 20” diameter slide lagged drum
• Tail pulley - Heavy duty 14” diameter, wing type pulley
• Snub pulley – Heavy duty 14” diameter, wing type pulley
• Shafts - C1045 turned and polished
• Bearings - Pillow block bearings
• Take ups - Screw type
• Belting - 3-ply 3/16 x 1/16 330 PIW
• Belt splice - Vulcanized
• Belt scraper - Standard primary belt scraper
General Specifications
• Hydraulic pumping unit - 20 HP electric pumping unit with electric over manual controls for ramps and conveyor discharge
• Electrical - 480 v/3 ph/60 hz enclosed panel. Includes main disconnect, circuit breaker and push button on/off switches with soft start. Mounted to chassis.
• Remote control - Wireless remote
• Guards – Tail pulley guard, v-belt guard and nip guard on head pulley. We do not warrant that our guards will meet all local codes. It is the responsibility of the end user to have them checked by a local inspector
• Paint Prep – Sand blast prep
• Prime – (1) coat primer painted
• Paint – (1) Maroon & Beige
• Owner’s Manual – (1) copy for maintenance and parts
Load area
• Grate – Heavy duty construction of 10’ x 5’ outside dimension
• Construction – Heavy duty flat bar construction
• Self-Cleaning ramp - Hinge on each side of grate
• Ramp bulkhead - 10’ wide by 5’ long, folds for road transport – Heavy duty hinge
Chassis
• Construction - Welded steel tube
• Axle - Tandem walking beam with dual (8) 11 x 22.5R tires
• Landing jacks – crank down
• Road portable package – Includes: 5th wheel hitch, brakes, lights, and mud flaps
Discharge Conveyor
• Size - 48” BW
• Undercarriage - Hydraulic raise and lower (discharge height of 11’)
• Frame - Channel frame
• Drive - Dual head drive
• Gear reducer – Dual class II reducers with tapered bushings
• Motors – (2) 25 HP 1800 RPM
• V- belt drive – (2) with drive guard
• Capacity – 1,000 STPH at 100 PCF material, 1.5” minus
• Belt speed - 225 FPM
• Flow control - Adjustable slide gate
• Discharge hood – with AR liner
• Loading area idlers - 5 “ dia. live shaft idlers and pillow block bearings
• Troughing idlers - CEMA C, Precision, 5" dia. rolls, 35 deg. trough, sealed ball bearings, 3.5' spacing
• Return idlers - CEMA C, Precision, 4" dia. rolls, rubber disc return, sealed, 10' spacing
• Drive pulley - Heavy duty 20” diameter slide lagged drum
• Tail pulley - Heavy duty 14” diameter, wing type pulley
• Snub pulley – Heavy duty 14” diameter, wing type pulley
• Shafts - C1045 turned and polished
• Bearings - Pillow block bearings
• Take ups - Screw type
• Belting - 3-ply 3/16 x 1/16 330 PIW
• Belt splice - Vulcanized
• Belt scraper - Standard primary belt scraper
General Specifications
• Hydraulic pumping unit - 20 HP electric pumping unit with electric over manual controls for ramps and conveyor discharge
• Electrical - 480 v/3 ph/60 hz enclosed panel. Includes main disconnect, circuit breaker and push button on/off switches with soft start. Mounted to chassis.
• Remote control - Wireless remote
• Guards – Tail pulley guard, v-belt guard and nip guard on head pulley. We do not warrant that our guards will meet all local codes. It is the responsibility of the end user to have them checked by a local inspector
• Paint Prep – Sand blast prep
• Prime – (1) coat primer painted
• Paint – (1) Maroon & Beige
• Owner’s Manual – (1) copy for maintenance and parts
Information:
| Serial Number | 2013194 |
| Stock Number | 16535 |
1