1300A NATIONAL Heavy sale in Minnesota

National Crane NC13110A operator seat controlled 30 ton crane
33' - 110' (10 - 33,5 m) four section, full power telescopic boom
Load Moment System: LMI displays information on length and angle of
boom, working radius, rated load and total weight being lifted.
Standard Work Area Definition System (WADS) allows operator to
pre-select and define safe working areas. Internal anti-two block
wiring. Boom Elevation: One(1) double acting hydraulic lift cylinder
"with integral holding valve. (-10o to +80o).
Crane Cab: Deluxe "
operator cab equipped with diesel cab heater, dome light, front and
rooftop wipers, swinging door, fan, horn, control console with single
axis joysticks in arm rests, hand/foot electronic throttle controls,
engine start/stop switch, and LMI display. Swing: 360o continuous
rotation with "Glide Swing" and manual brake in cab. Use with standard
crane with no hydraulic options. Hydraulic System: Open center type
consisting of a fixed displacement three section high pressure pump
which supplies oil to a main control valve and winch control valve. A
76 gallon (287,6 L) reservoir with 10-micron return line filter. Oil
cooler and mounting included. Ball valve on the suction line. Hoist:
Planetary "burst of speed" winch. Bare drum line pull 10,200 lbs (4626
kg) low speed. Winch drum rotation indicator (WDRI) on winch control
lever. Wire Rope: 390 ft (118,8 m) of 9/16" (14 mm) rotation resistant
wire rope. Single line pull 7,700 lbs (3492,2 kg). Headache Ball:
Round downhaul weight with top swivel, 7 ton (6,4 mt) capacity rating.
Outriggers: Two sets of out and down, crossframe outriggers with 20'
(6,1 m) span, outriggers can be positioned for retracted and mid-span
with 14' (4,2 m) manual locks. Includes removable ball and socket
aluminum pads mounted on legs. Hand held pendant controls located at
the rear of the crane. Torsion Box: Torsion resisting sub-base with
rotating turret (no flatbed included). Provides 14' (4,2 m) bed space
between outrigger and front of turret. Shear bolt mounting group
included. Miscellaneous Standard Equipment: Back up alarm, hour meter
in truck cab, outrigger motion alarm, parallel boom rest, rear bumper
underride protection , two(2) owner's manuals (English; 1 paper/1
disc) and outrigger monitoring system. PTO and mounting charges not
included in standard price. Standard Paint: DuPont Imron 5000 enamel
based paint - "National Platinum" color for cab, turret and base boom
section; standard "Black" for hydraulic reservoir, torsion box
(frame), inner outriggers, and inner boom sections.
Air Conditioning for crane cab. Self contained modular unit
Outriggers controls at operator's seat in addition to ground controls
Center mount front stabilizer with a 25" stroke w/first up feature.
13100/13110 Side-Stowing jib 25' pull-out to 44'
NC1300A 18' 8" Steel Treadplate wing decking w/ side ladder

Optional National Steel basket 72"x42" on 2' yoke ext, gravity hung, brake lock

2014 Freightliner Chassis
Detroit DD13 12.8L 435hp Diesel Engine 1550 FT/LBS @1100 RPM
Eaton/Fuller RTO-16908LL Transmission
20,000lbs Front Axle Weigh Rating
40,000lbs Rear Axle Weigh Rating
Locking Differential
70 Gallon Fuel Tank
Aluminum Wheels
Heated Mirrors
Jacobs Engine Brake
Block Heater

Year	2014
Lift Capacity	30 lb
Hours	2,500
Horsepower	435

National Crane NC13110A operator seat controlled 30 ton crane
33' - 110' (10 - 33,5 m) four section, full power telescopic boom
Load Moment System: LMI displays information on length and angle of
boom, working radius, rated load and total weight being lifted.
Standard Work Area Definition System (WADS) allows operator to
pre-select and define safe working areas. Internal anti-two block
wiring. Boom Elevation: One(1) double acting hydraulic lift cylinder
"with integral holding valve. (-10o to +80o).
Crane Cab: Deluxe "
operator cab equipped with diesel cab heater, dome light, front and
rooftop wipers, swinging door, fan, horn, control console with single
axis joysticks in arm rests, hand/foot electronic throttle controls,
engine start/stop switch, and LMI display. Swing: 360o continuous
rotation with "Glide Swing" and manual brake in cab. Use with standard
crane with no hydraulic options. Hydraulic System: Open center type
consisting of a fixed displacement three section high pressure pump
which supplies oil to a main control valve and winch control valve. A
76 gallon (287,6 L) reservoir with 10-micron return line filter. Oil
cooler and mounting included. Ball valve on the suction line. Hoist:
Planetary "burst of speed" winch. Bare drum line pull 10,200 lbs (4626
kg) low speed. Winch drum rotation indicator (WDRI) on winch control
lever. Wire Rope: 390 ft (118,8 m) of 9/16" (14 mm) rotation resistant
wire rope. Single line pull 7,700 lbs (3492,2 kg). Headache Ball:
Round downhaul weight with top swivel, 7 ton (6,4 mt) capacity rating.
Outriggers: Two sets of out and down, crossframe outriggers with 20'
(6,1 m) span, outriggers can be positioned for retracted and mid-span
with 14' (4,2 m) manual locks. Includes removable ball and socket
aluminum pads mounted on legs. Hand held pendant controls located at
the rear of the crane. Torsion Box: Torsion resisting sub-base with
rotating turret (no flatbed included). Provides 14' (4,2 m) bed space
between outrigger and front of turret. Shear bolt mounting group
included. Miscellaneous Standard Equipment: Back up alarm, hour meter
in truck cab, outrigger motion alarm, parallel boom rest, rear bumper
underride protection , two(2) owner's manuals (English; 1 paper/1
disc) and outrigger monitoring system. PTO and mounting charges not
included in standard price. Standard Paint: DuPont Imron 5000 enamel
based paint - "National Platinum" color for cab, turret and base boom
section; standard "Black" for hydraulic reservoir, torsion box
(frame), inner outriggers, and inner boom sections.
Air Conditioning for crane cab. Self contained modular unit
Outriggers controls at operator's seat in addition to ground controls
Center mount front stabilizer with a 25" stroke w/first up feature.
13100/13110 Side-Stowing jib 25' pull-out to 44'
NC1300A 18' 8" Steel Treadplate wing decking w/ side ladder

Optional National Steel basket 72"x42" on 2' yoke ext, gravity hung, brake lock

2014 Freightliner Chassis
Detroit DD13 12.8L 435hp Diesel Engine 1550 FT/LBS @1100 RPM
Eaton/Fuller RTO-16908LL Transmission
20,000lbs Front Axle Weigh Rating
40,000lbs Rear Axle Weigh Rating
Locking Differential
70 Gallon Fuel Tank
Aluminum Wheels
Heated Mirrors
Jacobs Engine Brake
Block Heater

Year	2014
Serial Number	299726
Lift Capacity	30 lb
Hours	2,500
Horsepower	435

2001 National 13105 Boom Truck, 31'-105’ Four Section Full Power Boom,Main Winch with 9/16” Wire Rope, 2 Speed, Anti-Two Block, Cab Heater

2001 Sterling LT9513, 260,000 miles, 20,000 engine hours 410HP Cat C12 engine, 8 Speed Manual Transmission

Year	2001
Location	Minneapolis, Minnesota
Lift Capacity	30 lb
Hours	20,114
Serial Number	32058
Horsepower	410
Stock Number	8001207