2017 NATIONAL NBT45
Price:Call
Buy
2017 NATIONAL NBT45
Used and New
Description:
National Crane 45 Ton (40,8 mT) Capacity, Five section, 34 - 142 ft (10,4 - 43,3 m) four plate, full power boom
includes 5,400 lbs (2449 kg) of non-removable rotating counterweight
Side-Stowing telescoping jib 31' pull-out to 55'
Boom: Full power telescoping cylinder with integral holding valve in
the telescoping cylinder. Three (3) quick reeve cast iron sheaves in
the boom nose. Boom Elevation: One(1) double acting hydraulic lift
cylinder with integral holding valve. (-10o to +80o) Load Moment &
Anti-two Block Systems: Graphical RCL system with audio/visual warning
system and control lever lockout. Electronic display of boom angle,
boom length, relative load moment indication, rated load, load, radius
and boom tip height. Standard WADS (Work Area Definition System)
allows operator to pre-select and define safe working areas. When
crane approaches set limits, audio/visual warnings alert the operator
of the jobsite obstructions. Crane Cab: All steel construction with
acoustical lining and tinted glass, deluxe seat with armrest mounted
single axis hydraulic pilot controllers, windshield with electric
wiper, sliding skylight with sunshade and electric wiper, hot water
cab heater with defroster (diesel fired with remote diesel tank
mounted to cab), A/C, circulating fan, fire extinguisher, dual cab mounted
work lights, engine start/stop switches and signal horn. Swing: 360o
continuous rotation, planetary "Glide Swing" with foot actuated
multi-disc brake and pinion guard. Hydraulic System: Pressure
compensated, load sense, closed-center hydraulic system with one(1)
left-hand rotation, variable displacement pump. 100 gal (378,5 L)
hydraulic reservoir, external sight level indicator, filter condition
indicator, oil temperature gauge and boom rest mounted oil cooler with
electric fan and butterfly valve on the suction line. Hoist: One(1)
main hoist with grooved drum, two-speed power up and down, automatic
multi-disc brake, electronic drum rotation indicator (DRI), and drum
cable follower. Bare drum maximum pull 15,000 pounds (6.308,8 kg) low
speed. Wire Rope: 450 ft (137,2 m) of 5/8 in (16 mm) diameter 35x7
(5:1 design factor) for main hoist. Single line pull 11,250 pounds
(5.102,9 kg) Hook Block: 20 ton (18,1 mt) 328 pounds (149 kg)
single sheave, "Quick Reeve" type block with swivel hook and safety
latch. Outriggers: Hydraulic front and rear. Two(2) section extendable
beams with integral check valves for 360o operation, 24 in (607 mm)
diameter aluminum outrigger floats and three(3) position settings (0%,
50% & 100%). Controls located in crane cab and on both sides of
subframe. Outrigger Monitoring System included. Stabilizers: Single
front outrigger (SFO) - folds for tilting truck hood (requires
extended front chassis frame rails). SFO has "first up" feature.
Decking/Ladders/Bumpers: Full-length steel decking on both sides of
crane, fold down ladder on drivers side of decking for crane cab
access, one(1) removable ladder stowed/locked at the rear of crane
frame that can be used for passenger side & driver side rear for crane
access, two(2) mud flaps which attach to truck frame and full width
rear bumper which bolts to truck frame. Miscellaneous Standard
Equipment: 360o stable, Back-up alarm, hour meter in crane cab,
outrigger motion alarm, marker and indicator lights, owners
manual
Optional radio remotes and basket available
2017 Peterbilt Model 567
:CUMMINS ISX-12 425V [email protected] [email protected] [email protected]
Allison automatic transmission
80,000 GVWR
Paccar 160 Amp Alternator, Brushed
Immersion type Pre-heater 110-120V
Paccar 12V Starter, 4 Paccar batteries 2800 CCA
26" aluminum 100 Gal Fuel Tank LH U/C, DEF Tank Mounted LH BOC small
Front Michelin 20 ply 425/65R22.5 XZY3 Tires: Rear 16 ply 11R22.5 Works XDY Tires
aluminum wheels
includes 5,400 lbs (2449 kg) of non-removable rotating counterweight
Side-Stowing telescoping jib 31' pull-out to 55'
Boom: Full power telescoping cylinder with integral holding valve in
the telescoping cylinder. Three (3) quick reeve cast iron sheaves in
the boom nose. Boom Elevation: One(1) double acting hydraulic lift
cylinder with integral holding valve. (-10o to +80o) Load Moment &
Anti-two Block Systems: Graphical RCL system with audio/visual warning
system and control lever lockout. Electronic display of boom angle,
boom length, relative load moment indication, rated load, load, radius
and boom tip height. Standard WADS (Work Area Definition System)
allows operator to pre-select and define safe working areas. When
crane approaches set limits, audio/visual warnings alert the operator
of the jobsite obstructions. Crane Cab: All steel construction with
acoustical lining and tinted glass, deluxe seat with armrest mounted
single axis hydraulic pilot controllers, windshield with electric
wiper, sliding skylight with sunshade and electric wiper, hot water
cab heater with defroster (diesel fired with remote diesel tank
mounted to cab), A/C, circulating fan, fire extinguisher, dual cab mounted
work lights, engine start/stop switches and signal horn. Swing: 360o
continuous rotation, planetary "Glide Swing" with foot actuated
multi-disc brake and pinion guard. Hydraulic System: Pressure
compensated, load sense, closed-center hydraulic system with one(1)
left-hand rotation, variable displacement pump. 100 gal (378,5 L)
hydraulic reservoir, external sight level indicator, filter condition
indicator, oil temperature gauge and boom rest mounted oil cooler with
electric fan and butterfly valve on the suction line. Hoist: One(1)
main hoist with grooved drum, two-speed power up and down, automatic
multi-disc brake, electronic drum rotation indicator (DRI), and drum
cable follower. Bare drum maximum pull 15,000 pounds (6.308,8 kg) low
speed. Wire Rope: 450 ft (137,2 m) of 5/8 in (16 mm) diameter 35x7
(5:1 design factor) for main hoist. Single line pull 11,250 pounds
(5.102,9 kg) Hook Block: 20 ton (18,1 mt) 328 pounds (149 kg)
single sheave, "Quick Reeve" type block with swivel hook and safety
latch. Outriggers: Hydraulic front and rear. Two(2) section extendable
beams with integral check valves for 360o operation, 24 in (607 mm)
diameter aluminum outrigger floats and three(3) position settings (0%,
50% & 100%). Controls located in crane cab and on both sides of
subframe. Outrigger Monitoring System included. Stabilizers: Single
front outrigger (SFO) - folds for tilting truck hood (requires
extended front chassis frame rails). SFO has "first up" feature.
Decking/Ladders/Bumpers: Full-length steel decking on both sides of
crane, fold down ladder on drivers side of decking for crane cab
access, one(1) removable ladder stowed/locked at the rear of crane
frame that can be used for passenger side & driver side rear for crane
access, two(2) mud flaps which attach to truck frame and full width
rear bumper which bolts to truck frame. Miscellaneous Standard
Equipment: 360o stable, Back-up alarm, hour meter in crane cab,
outrigger motion alarm, marker and indicator lights, owners
manual
Optional radio remotes and basket available
2017 Peterbilt Model 567
:CUMMINS ISX-12 425V [email protected] [email protected] [email protected]
Allison automatic transmission
80,000 GVWR
Paccar 160 Amp Alternator, Brushed
Immersion type Pre-heater 110-120V
Paccar 12V Starter, 4 Paccar batteries 2800 CCA
26" aluminum 100 Gal Fuel Tank LH U/C, DEF Tank Mounted LH BOC small
Front Michelin 20 ply 425/65R22.5 XZY3 Tires: Rear 16 ply 11R22.5 Works XDY Tires
aluminum wheels
Information:
| Year | 2017 |
| Stock Number | 163028NAT16 |
| Lift Capacity | 90,000 lb |
2017 NATIONAL NBT45
Price:Call
Buy
2017 NATIONAL NBT45
Used and New
Description:
National Crane 45 Ton (40,8 mT) Capacity, Five section, 34 - 142 ft (10,4 - 43,3 m) four plate, full power boom
includes 5,400 lbs (2449 kg) of non-removable rotating counterweight
Side-Stowing telescoping jib 31' pull-out to 55'
Boom: Full power telescoping cylinder with integral holding valve in
the telescoping cylinder. Three (3) quick reeve cast iron sheaves in
the boom nose. Boom Elevation: One(1) double acting hydraulic lift
cylinder with integral holding valve. (-10o to +80o) Load Moment &
Anti-two Block Systems: Graphical RCL system with audio/visual warning
system and control lever lockout. Electronic display of boom angle,
boom length, relative load moment indication, rated load, load, radius
and boom tip height. Standard WADS (Work Area Definition System)
allows operator to pre-select and define safe working areas. When
crane approaches set limits, audio/visual warnings alert the operator
of the jobsite obstructions. Crane Cab: All steel construction with
acoustical lining and tinted glass, deluxe seat with armrest mounted
single axis hydraulic pilot controllers, windshield with electric
wiper, sliding skylight with sunshade and electric wiper, hot water
cab heater with defroster (diesel fired with remote diesel tank
mounted to cab), A/C, circulating fan, fire extinguisher, dual cab mounted
work lights, engine start/stop switches and signal horn. Swing: 360o
continuous rotation, planetary "Glide Swing" with foot actuated
multi-disc brake and pinion guard. Hydraulic System: Pressure
compensated, load sense, closed-center hydraulic system with one(1)
left-hand rotation, variable displacement pump. 100 gal (378,5 L)
hydraulic reservoir, external sight level indicator, filter condition
indicator, oil temperature gauge and boom rest mounted oil cooler with
electric fan and butterfly valve on the suction line. Hoist: One(1)
main hoist with grooved drum, two-speed power up and down, automatic
multi-disc brake, electronic drum rotation indicator (DRI), and drum
cable follower. Bare drum maximum pull 15,000 pounds (6.308,8 kg) low
speed. Wire Rope: 450 ft (137,2 m) of 5/8 in (16 mm) diameter 35x7
(5:1 design factor) for main hoist. Single line pull 11,250 pounds
(5.102,9 kg) Hook Block: 20 ton (18,1 mt) 328 pounds (149 kg)
single sheave, "Quick Reeve" type block with swivel hook and safety
latch. Outriggers: Hydraulic front and rear. Two(2) section extendable
beams with integral check valves for 360o operation, 24 in (607 mm)
diameter aluminum outrigger floats and three(3) position settings (0%,
50% & 100%). Controls located in crane cab and on both sides of
subframe. Outrigger Monitoring System included. Stabilizers: Single
front outrigger (SFO) - folds for tilting truck hood (requires
extended front chassis frame rails). SFO has "first up" feature.
Decking/Ladders/Bumpers: Full-length steel decking on both sides of
crane, fold down ladder on drivers side of decking for crane cab
access, one(1) removable ladder stowed/locked at the rear of crane
frame that can be used for passenger side & driver side rear for crane
access, two(2) mud flaps which attach to truck frame and full width
rear bumper which bolts to truck frame. Miscellaneous Standard
Equipment: 360o stable, Back-up alarm, hour meter in crane cab,
outrigger motion alarm, marker and indicator lights, owners
manual
Optional radio remotes and basket available
2017 Peterbilt Model 567
:CUMMINS ISX-12 425V [email protected] [email protected] [email protected]
Allison automatic transmission
80,000 GVWR
Paccar 160 Amp Alternator, Brushed
Immersion type Pre-heater 110-120V
Paccar 12V Starter, 4 Paccar batteries 2800 CCA
26" aluminum 100 Gal Fuel Tank LH U/C, DEF Tank Mounted LH BOC small
Front Michelin 20 ply 425/65R22.5 XZY3 Tires: Rear 16 ply 11R22.5 Works XDY Tires
aluminum wheels
includes 5,400 lbs (2449 kg) of non-removable rotating counterweight
Side-Stowing telescoping jib 31' pull-out to 55'
Boom: Full power telescoping cylinder with integral holding valve in
the telescoping cylinder. Three (3) quick reeve cast iron sheaves in
the boom nose. Boom Elevation: One(1) double acting hydraulic lift
cylinder with integral holding valve. (-10o to +80o) Load Moment &
Anti-two Block Systems: Graphical RCL system with audio/visual warning
system and control lever lockout. Electronic display of boom angle,
boom length, relative load moment indication, rated load, load, radius
and boom tip height. Standard WADS (Work Area Definition System)
allows operator to pre-select and define safe working areas. When
crane approaches set limits, audio/visual warnings alert the operator
of the jobsite obstructions. Crane Cab: All steel construction with
acoustical lining and tinted glass, deluxe seat with armrest mounted
single axis hydraulic pilot controllers, windshield with electric
wiper, sliding skylight with sunshade and electric wiper, hot water
cab heater with defroster (diesel fired with remote diesel tank
mounted to cab), A/C, circulating fan, fire extinguisher, dual cab mounted
work lights, engine start/stop switches and signal horn. Swing: 360o
continuous rotation, planetary "Glide Swing" with foot actuated
multi-disc brake and pinion guard. Hydraulic System: Pressure
compensated, load sense, closed-center hydraulic system with one(1)
left-hand rotation, variable displacement pump. 100 gal (378,5 L)
hydraulic reservoir, external sight level indicator, filter condition
indicator, oil temperature gauge and boom rest mounted oil cooler with
electric fan and butterfly valve on the suction line. Hoist: One(1)
main hoist with grooved drum, two-speed power up and down, automatic
multi-disc brake, electronic drum rotation indicator (DRI), and drum
cable follower. Bare drum maximum pull 15,000 pounds (6.308,8 kg) low
speed. Wire Rope: 450 ft (137,2 m) of 5/8 in (16 mm) diameter 35x7
(5:1 design factor) for main hoist. Single line pull 11,250 pounds
(5.102,9 kg) Hook Block: 20 ton (18,1 mt) 328 pounds (149 kg)
single sheave, "Quick Reeve" type block with swivel hook and safety
latch. Outriggers: Hydraulic front and rear. Two(2) section extendable
beams with integral check valves for 360o operation, 24 in (607 mm)
diameter aluminum outrigger floats and three(3) position settings (0%,
50% & 100%). Controls located in crane cab and on both sides of
subframe. Outrigger Monitoring System included. Stabilizers: Single
front outrigger (SFO) - folds for tilting truck hood (requires
extended front chassis frame rails). SFO has "first up" feature.
Decking/Ladders/Bumpers: Full-length steel decking on both sides of
crane, fold down ladder on drivers side of decking for crane cab
access, one(1) removable ladder stowed/locked at the rear of crane
frame that can be used for passenger side & driver side rear for crane
access, two(2) mud flaps which attach to truck frame and full width
rear bumper which bolts to truck frame. Miscellaneous Standard
Equipment: 360o stable, Back-up alarm, hour meter in crane cab,
outrigger motion alarm, marker and indicator lights, owners
manual
Optional radio remotes and basket available
2017 Peterbilt Model 567
:CUMMINS ISX-12 425V [email protected] [email protected] [email protected]
Allison automatic transmission
80,000 GVWR
Paccar 160 Amp Alternator, Brushed
Immersion type Pre-heater 110-120V
Paccar 12V Starter, 4 Paccar batteries 2800 CCA
26" aluminum 100 Gal Fuel Tank LH U/C, DEF Tank Mounted LH BOC small
Front Michelin 20 ply 425/65R22.5 XZY3 Tires: Rear 16 ply 11R22.5 Works XDY Tires
aluminum wheels
Information:
| Year | 2017 |
| Serial Number | 300288 |
| Stock Number | 163026NAT16 |
| Lift Capacity | 90,000 lb |
2015 NATIONAL NBT45
Price:Call
Buy
2015 NATIONAL NBT45
Used and New
Description:
National Crane 45 Ton (40,8 mT) Capacity, five section, 34 - 142 ft (10,4 - 43,3 m) four plate, full power boom
includes 5,400 lbs (2449 kg) of non-removable rotating counterweight
Side-Stowing telescoping jib 31' pull-out to 55'
Boom: Full power telescoping cylinder with integral holding valve in
the telescoping cylinder. Three (3) quick reeve cast iron sheaves in
the boom nose. Boom Elevation: One(1) double acting hydraulic lift
cylinder with integral holding valve. (-10o to +80o) Load Moment &
Anti-two Block Systems: Graphical LMI system with audio/visual warning
system and control lever lockout. Electronic display of boom angle,
boom length, relative load moment indication, rated load, load, radius
and boom tip height. Standard WADS (Work Area Definition System)
allows operator to pre-select and define safe working areas. When
crane approaches set limits, audio/visual warnings alert the operator
"of the jobsite obstructions.
Crane Cab: All steel construction with "
acoustical lining and tinted glass, deluxe seat with armrest mounted
single axis hydraulic pilot controllers, windshield with electric
wiper, sliding skylight with sunshade and electric wiper, hot water
cab heater with defroster (diesel fired with remote diesel tank
mounted to cab), A/C, circulating fan, fire extinguisher, dual cab mounted
work lights, engine start/stop switches and signal horn. Swing: 360o
continuous rotation, planetary "Glide Swing" with foot actuated
multi-disc brake and pinion guard. Hydraulic System: Pressure
compensated, load sense, closed-center hydraulic system with one(1)
left-hand rotation, variable displacement pump. 100 gal (378,5 L)
hydraulic reservoir, external sight level indicator, filter condition
indicator, oil temperature gauge and boom rest mounted oil cooler with
electric fan and butterfly valve on the suction line. Hoist: One(1)
main hoist with grooved drum, two-speed power up and down, automatic
multi-disc brake, electronic drum rotation indicator (DRI), and drum
cable follower. Bare drum maximum pull 15,000 pounds (6.308,8 kg) low
speed. Wire Rope: 450 ft (137,2 m) of 5/8 in (16 mm) diameter 35x7
(5:1 design factor) for main hoist. Single line pull 11,250 pounds
(5.102,9 kg) Headache Ball: 20 ton (18,1 mt) 328 pounds (149 kg)
single sheave, "Quick Reeve" type block with swivel hook and safety
latch. Outriggers: Hydraulic front and rear. Two(2) section extendable
beams with integral check valves for 360o operation, 24 in (607 mm)
diameter aluminum outrigger floats and three(3) position settings (0%,
50% & 100%). Controls located in crane cab and on both sides of
subframe. Outrigger Monitoring System included. Stabilizers: Single
front outrigger (SFO) - folds for tilting truck hood (requires
extended front chassis frame rails). SFO has "first up" feature.
Decking/Ladders/Bumpers: Full-length steel decking on both sides of
crane, fold down ladder on drivers side of decking for crane cab
access, one(1) removable ladder stowed/locked at the rear of crane
frame that can be used for passenger side & driver side rear for crane
access, two(2) mud flaps which attach to truck frame and full width
rear bumper which bolts to truck frame. Miscellaneous Standard
Equipment: 360o stable, Back-up alarm, hour meter in crane cab,
outrigger motion alarm, marker and indicator lights, owners
manual
Optional radio remote and basket available
2015 Peterbilt Model 567
CUMMINS ISX-12 425V [email protected] [email protected] [email protected]
Allison automatic transmission, 80,000 GVWR
Paccar 130 Amp Alternator, Brushless w/Voltage regulator
Paccar 12V Starter, Optima DT31T Batteries 2700 CCA threaded terminals
26" aluminum 100 Gal Fuel Tank LH U/C, DEF Tank Mounted LH BOC small
Front 20 ply 425/65R22.5 M844F, Rear 14ply 11R22.5 M711 Tires
aluminum wheels
includes 5,400 lbs (2449 kg) of non-removable rotating counterweight
Side-Stowing telescoping jib 31' pull-out to 55'
Boom: Full power telescoping cylinder with integral holding valve in
the telescoping cylinder. Three (3) quick reeve cast iron sheaves in
the boom nose. Boom Elevation: One(1) double acting hydraulic lift
cylinder with integral holding valve. (-10o to +80o) Load Moment &
Anti-two Block Systems: Graphical LMI system with audio/visual warning
system and control lever lockout. Electronic display of boom angle,
boom length, relative load moment indication, rated load, load, radius
and boom tip height. Standard WADS (Work Area Definition System)
allows operator to pre-select and define safe working areas. When
crane approaches set limits, audio/visual warnings alert the operator
"of the jobsite obstructions.
Crane Cab: All steel construction with "
acoustical lining and tinted glass, deluxe seat with armrest mounted
single axis hydraulic pilot controllers, windshield with electric
wiper, sliding skylight with sunshade and electric wiper, hot water
cab heater with defroster (diesel fired with remote diesel tank
mounted to cab), A/C, circulating fan, fire extinguisher, dual cab mounted
work lights, engine start/stop switches and signal horn. Swing: 360o
continuous rotation, planetary "Glide Swing" with foot actuated
multi-disc brake and pinion guard. Hydraulic System: Pressure
compensated, load sense, closed-center hydraulic system with one(1)
left-hand rotation, variable displacement pump. 100 gal (378,5 L)
hydraulic reservoir, external sight level indicator, filter condition
indicator, oil temperature gauge and boom rest mounted oil cooler with
electric fan and butterfly valve on the suction line. Hoist: One(1)
main hoist with grooved drum, two-speed power up and down, automatic
multi-disc brake, electronic drum rotation indicator (DRI), and drum
cable follower. Bare drum maximum pull 15,000 pounds (6.308,8 kg) low
speed. Wire Rope: 450 ft (137,2 m) of 5/8 in (16 mm) diameter 35x7
(5:1 design factor) for main hoist. Single line pull 11,250 pounds
(5.102,9 kg) Headache Ball: 20 ton (18,1 mt) 328 pounds (149 kg)
single sheave, "Quick Reeve" type block with swivel hook and safety
latch. Outriggers: Hydraulic front and rear. Two(2) section extendable
beams with integral check valves for 360o operation, 24 in (607 mm)
diameter aluminum outrigger floats and three(3) position settings (0%,
50% & 100%). Controls located in crane cab and on both sides of
subframe. Outrigger Monitoring System included. Stabilizers: Single
front outrigger (SFO) - folds for tilting truck hood (requires
extended front chassis frame rails). SFO has "first up" feature.
Decking/Ladders/Bumpers: Full-length steel decking on both sides of
crane, fold down ladder on drivers side of decking for crane cab
access, one(1) removable ladder stowed/locked at the rear of crane
frame that can be used for passenger side & driver side rear for crane
access, two(2) mud flaps which attach to truck frame and full width
rear bumper which bolts to truck frame. Miscellaneous Standard
Equipment: 360o stable, Back-up alarm, hour meter in crane cab,
outrigger motion alarm, marker and indicator lights, owners
manual
Optional radio remote and basket available
2015 Peterbilt Model 567
CUMMINS ISX-12 425V [email protected] [email protected] [email protected]
Allison automatic transmission, 80,000 GVWR
Paccar 130 Amp Alternator, Brushless w/Voltage regulator
Paccar 12V Starter, Optima DT31T Batteries 2700 CCA threaded terminals
26" aluminum 100 Gal Fuel Tank LH U/C, DEF Tank Mounted LH BOC small
Front 20 ply 425/65R22.5 M844F, Rear 14ply 11R22.5 M711 Tires
aluminum wheels
Information:
| Year | 2015 |
| Stock Number | 157268NAT14 |
| Lift Capacity | 90,000 lb |
2013 NATIONAL NBT45
Price:Call
Buy
2013 NATIONAL NBT45
Used and New
Description:
National NBT 45161• 38.5 - 161ft. 5-section full-power boom• 169' hydraulic sheave height• 38' side stowing JIB• 205' maximum sheave height• 4-plate construction, full-power boom• One double acting hydraulic cylinder (-10° to +80°) with integral holding valve• Work Area Definition Syste• 72" x 42" work platform/OSHA Personnel Lift Test Weight Provisions• 360° continuous rotation, planetary “Glide Swing” with foot actuated, multi-disk brake, pinnion guard• 4500 lbs (2,041 kg) non-removable counterweight• Hydraulic front and rear outriggers. (2) section extendable beams w/integral check valves for 360° operation; 24 in. (607 mm) diameter aluminum outrigger floats. (3) Position settings: straightdown, mid span and full span. Controls located in crane cab and on both sides of subframe. Single front stabilizer.• Aluminum full-length decking on both sides of crane
Optional radio remotes and basket available
2013 Peterbilt Model 367 Tandem Axle • Paccar MX455 diesel engine• Allison 4500 RDS-P auto transmission• Wheelbase: 292"• Cab to axle: 215"• 80,000 GVWR• Two 10K pusher axles• One 10K tag axle• All axles with 225/70R19.5 tires mounted on aluminum wheels
Optional radio remotes and basket available
2013 Peterbilt Model 367 Tandem Axle • Paccar MX455 diesel engine• Allison 4500 RDS-P auto transmission• Wheelbase: 292"• Cab to axle: 215"• 80,000 GVWR• Two 10K pusher axles• One 10K tag axle• All axles with 225/70R19.5 tires mounted on aluminum wheels
Information:
| Year | 2013 |
| Stock Number | 149134NAT12 |
2015 NATIONAL NBT45
Price:USD $485,000
Buy
2015 NATIONAL NBT45
Used and New
Description:
NBT45161 Standard Configuration - 360°Stable - Basic 45 Ton Unit
161ft. 5-section full-power boom
BOOM: 4-plate construction, full-power boom. Integral holding valve on
the telescope cylinder. Three (3) quick reeve cast iron sheaves in the
main boom nose. BOOM ELEVATION: One double acting hydraulic cylinder
(-10° to +80°) with integral holding valve LOAD MOMENT AND ANTI-TWO
BLOCK SYSTEM: Graphical, LMI system with Audio-visual (light/buzzer)
warning system and control lever lockout system with electronic
display of boom angle and length, relative load moment indication,
rated load, load, radius and boom tip height. The standard Work Area
Definition System (WADS) allows the operator to pre-select and define
safe working areas. If the crane approaches the pre-set limits,
audio-visual warnings aid the operator in avoiding job-site
obstructions. CRANE CAB: All steel construction with acoustical lining
and tinted glass throughout, deluxe seat with armrest mounted
single-axis hydraulic pilot operated controllers, windshield and
sliding skylight with electric wipers, hot water cab heater with
defroster which is diesel fired, circulating fan, fire extinguisher,
dual cab mounted work lights. Unit is equipped with a signal horn
switch and engine start / stop switches. SWING: 360° continuous
rotation, planetary "Glide swing" with foot actuated multi-disk brake,
pinion guard COUNTERWEIGHT: 4500lbs (2,041 kg) non-removable
counterweight. (Total 5,400-lbs.(2449.3 kg) which includes tail
counterweight support) HYDRAULIC SYSTEM: Pressure compensated,
load-sense, closed-center hydraulic system with (1) left-hand
rotation, variable displacement piston pump; hydraulic reservoir,
external sight level indicator, filter condition indicator; oil
temperature indication and oil cooler with electric fan. Reservoir
capacity 100-gal.(378.5 L) equipped with butterfly valve on the
suction line. HOIST: (1) Main hoist with grooved drum, two-speed power
up and down with automatic multi-disc brake, electronic drum rotation
indicator (DRI), Last Layer Indicator (LLI) and drum cable follower.
Bare drum pull 15,000-lbs.(6803.8 kg) low speed. WIRE ROPE: 450-ft
(137.2 m) of 5/8 in. (16 mm) diameter 35x7 (5:1 Design Factor) for
main hoist. Single line pull 11,250-lbs.(5102.9 kg) HOOKBLOCK: 20 ton
(18.1 mt) capacity, 328 lb.(149 kg) single sheave, "quick reeve" type
block with swivel hook and safety latch. OUTRIGGERS: Hydraulic front
and rear. (2) section extendable beams with integral check valves for
360° operation; 24 in. (607 mm) diameter aluminum outrigger floats.
(3) Position settings: 0%, 50% and 100%. Controls located in crane cab
and on both sides of subframe. Single front stabilizer. STABILIZERS:
Single front stabilizer - folds for tilting truck hood SFO has the first up
feature. DECKING/LADDERS/BUMPER: Steel full-length decking on both
sides of crane; fold-down ladder for driver side crane cab access; (1)
portable ladder stowed/locked at rear of machine which can be used for
passenger side crane cab access, passenger side rear of machine and
driver side rear of machine.
MISCELLANEOUS STANDARD EQUIPMENT: Backup alarm, hour meter in crane
cab, outrigger in motion alarm, marker and indicator lights, (2)
owners manuals (1-paper copy & 1-copy in CD digital format) manuals
will be provided in the English language, EET included. Rotation house
lock for boom stowage over the truck cab is included.
Monitoring System is included.
38' side stowing Jib
Hot shift PTO
Oil Cooler
Radio remote ready option
Aluminum platform for basket & test weight storage
SFO brackets for Front Tow Hook Chassis
Optional
National Steel basket 72"x42" on 4' yoke ext, gravity hung, brake lock
Basket test weight package for BSA-1 and BSA-R1
Four function remote control Available
2015 Peterbilt Model 367 SBFA w/ Automatic Transmission - White
Paccar MX 455 Hp @ 1900 RPM 1650 ft-lb Torque @ 1100 RPM
Paccar 130 Amp Alternator, Brushless w/Voltage regulator
Immersion type Pre-heater 110-120V
Paccar 12V Starter, 3 Optima DT31T Batteries 2700 CCA threaded terminals
Allison 4500 RDS-P auto transmission, 1Dash Mtd Double Acting Air PTO valve
26" aluminum 100 Gal Fuel Tank LH U/C, DEF Tank Mounted LH BOC small
161ft. 5-section full-power boom
BOOM: 4-plate construction, full-power boom. Integral holding valve on
the telescope cylinder. Three (3) quick reeve cast iron sheaves in the
main boom nose. BOOM ELEVATION: One double acting hydraulic cylinder
(-10° to +80°) with integral holding valve LOAD MOMENT AND ANTI-TWO
BLOCK SYSTEM: Graphical, LMI system with Audio-visual (light/buzzer)
warning system and control lever lockout system with electronic
display of boom angle and length, relative load moment indication,
rated load, load, radius and boom tip height. The standard Work Area
Definition System (WADS) allows the operator to pre-select and define
safe working areas. If the crane approaches the pre-set limits,
audio-visual warnings aid the operator in avoiding job-site
obstructions. CRANE CAB: All steel construction with acoustical lining
and tinted glass throughout, deluxe seat with armrest mounted
single-axis hydraulic pilot operated controllers, windshield and
sliding skylight with electric wipers, hot water cab heater with
defroster which is diesel fired, circulating fan, fire extinguisher,
dual cab mounted work lights. Unit is equipped with a signal horn
switch and engine start / stop switches. SWING: 360° continuous
rotation, planetary "Glide swing" with foot actuated multi-disk brake,
pinion guard COUNTERWEIGHT: 4500lbs (2,041 kg) non-removable
counterweight. (Total 5,400-lbs.(2449.3 kg) which includes tail
counterweight support) HYDRAULIC SYSTEM: Pressure compensated,
load-sense, closed-center hydraulic system with (1) left-hand
rotation, variable displacement piston pump; hydraulic reservoir,
external sight level indicator, filter condition indicator; oil
temperature indication and oil cooler with electric fan. Reservoir
capacity 100-gal.(378.5 L) equipped with butterfly valve on the
suction line. HOIST: (1) Main hoist with grooved drum, two-speed power
up and down with automatic multi-disc brake, electronic drum rotation
indicator (DRI), Last Layer Indicator (LLI) and drum cable follower.
Bare drum pull 15,000-lbs.(6803.8 kg) low speed. WIRE ROPE: 450-ft
(137.2 m) of 5/8 in. (16 mm) diameter 35x7 (5:1 Design Factor) for
main hoist. Single line pull 11,250-lbs.(5102.9 kg) HOOKBLOCK: 20 ton
(18.1 mt) capacity, 328 lb.(149 kg) single sheave, "quick reeve" type
block with swivel hook and safety latch. OUTRIGGERS: Hydraulic front
and rear. (2) section extendable beams with integral check valves for
360° operation; 24 in. (607 mm) diameter aluminum outrigger floats.
(3) Position settings: 0%, 50% and 100%. Controls located in crane cab
and on both sides of subframe. Single front stabilizer. STABILIZERS:
Single front stabilizer - folds for tilting truck hood SFO has the first up
feature. DECKING/LADDERS/BUMPER: Steel full-length decking on both
sides of crane; fold-down ladder for driver side crane cab access; (1)
portable ladder stowed/locked at rear of machine which can be used for
passenger side crane cab access, passenger side rear of machine and
driver side rear of machine.
MISCELLANEOUS STANDARD EQUIPMENT: Backup alarm, hour meter in crane
cab, outrigger in motion alarm, marker and indicator lights, (2)
owners manuals (1-paper copy & 1-copy in CD digital format) manuals
will be provided in the English language, EET included. Rotation house
lock for boom stowage over the truck cab is included.
Monitoring System is included.
38' side stowing Jib
Hot shift PTO
Oil Cooler
Radio remote ready option
Aluminum platform for basket & test weight storage
SFO brackets for Front Tow Hook Chassis
Optional
National Steel basket 72"x42" on 4' yoke ext, gravity hung, brake lock
Basket test weight package for BSA-1 and BSA-R1
Four function remote control Available
2015 Peterbilt Model 367 SBFA w/ Automatic Transmission - White
Paccar MX 455 Hp @ 1900 RPM 1650 ft-lb Torque @ 1100 RPM
Paccar 130 Amp Alternator, Brushless w/Voltage regulator
Immersion type Pre-heater 110-120V
Paccar 12V Starter, 3 Optima DT31T Batteries 2700 CCA threaded terminals
Allison 4500 RDS-P auto transmission, 1Dash Mtd Double Acting Air PTO valve
26" aluminum 100 Gal Fuel Tank LH U/C, DEF Tank Mounted LH BOC small
Information:
| Year | 2015 |
| Location | Minneapolis, Minnesota |
| Stock Number | 153437NAT13 |
| Lift Capacity | 45 lb |
| Hours | 1,128 |
| Serial Number | 299248 |
1