2017 NATIONAL NBT55
Price:Call
Buy
2017 NATIONAL NBT55
Used and New
Description:
National Crane 55 ton (49,9 mt) capacity, 360o stable standard configuration, two(2) 3,000 lbs (1.360 kg) hydraulically removable counterweight slabs, with a five(5) section, 32- 128 ft (9,5 - 39 m) four plate, full power boom Boom: Full power telescoping cylinder with integral holding valve. Three (3) quick reeve cast iron sheaves. Boom Elevation: One(1) double
acting hydraulic lift cylinder with integral holding valve. (-10o to +75o) Load Moment & Anti-two Block Systems: Graphical color RCL system with audio/visual warning system and control lever lockout. Electronic display of boom angle, boom length, relative load moment indication, rated load, load, radius and boom tip height. External anti-two block
system. Standard WADS (Work Area Definition System) allows operator to pre-select and define safe working areas. When crane approaches set limits, audio/visual warnings alert the operator of the jobsite obstructions. Crane Cab: All steel construction with acoustical lining and tinted glass, deluxe seat with armrest mounted single axis electronic controllers, windshield with electric wiper, sliding skylight with wiper and sunshade, hot water cab heater with defroster (diesel fired with remote diesel tank mounted to cab), circulating
fan, air conditioning, fire extinguisher, dual cab mounted work lights, engine start/stop switches, hour meter (shown on the RCL display) and signal horn. Swing: 360o continuous rotation, planetary Glide Swing with foot actuated multi-disc brake and pinion guard. Counterweight: Hydraulically removable counterweight system. 1,100 lbs (499 kg) counterweight mounted (not needed if auxiliary winch is ordered) Hydraulic System: Pressure compensated, load sense, closed-center hydraulic system with one(1) left-hand rotation, variable displacement piston pump. 100 gal (378,5 L) hydraulic reservoir, external sight level indicator, filter condition indicator, oil temperature gauge and oil cooler with electric fan and butterfly valve on the suction line. Hoist: One(1) main hoist with grooved drum, two-speed power up and down, automatic multi-disc brake, electronic drum rotation indicator (DRI), last layer indicator (LLI), and drum
cable follower. Bare drum maximum pull 15,000 pounds (6.308,8 kg) low speed. Wire Rope: 450 ft (137,2 m) of 5/8 in (16 mm) diameter 35x7 (5:1 design factor) for main hoist. Single line pull 11,280 pounds (5116,5 kg) Hook Block: 20 ton (18,1 mt) 328 pounds (149 kg) single sheave, "Quick Reeve" type block with swivel hook and safety latch. Outriggers: Hydraulic front and rear. Two section extendable beams with integral check valves for 360o operation, 24 in (607 mm) diameter aluminum outrigger floats and three position settings (0%, 50%, and
100%). Controls located in crane cab and both sides of subframe. Outrigger Monitoring System included. Decking/Ladders/Bumpers: Full length aluminum decking , fold down ladder on drivers side that aligns with crane cab and a portable aluminum ladder that stows at the rear of the crane (can be used for crane cab access on passenger side of crane and on the driver and passenger's side over the rear bumper, two(2) mud flaps which attach to truck frame and full width rear bumper which bolts to truck frame. Miscellaneous Standard Equipment:
360o stable, Back-up alarm, outrigger motion alarm, marker and indicator lights, remote control "bump" switch to control main winch and aux winch(as required), two(2) English owner's manuals (1 paper & 1 USB flash drive), and EET included. Standard Paint: Axalta Imron® Elite Productive paint. - "National Platinum" color for turret, crane
cab and base boom section; standard "Black" for torsion box (frame), outriggers and inner boom sections. 26 to 45 ft. (7.9 to 13.7 m) tele Jib, offsettable at 0° and 30° positions
Turret mounted auxiliary winch with grooved drum, two speed power up and down, 15,000 lbs (6.803,8 kg) bare drum pull on low speed. 450 ft (137,1 m) of 5/8 in (16 mm) rotation resistant rope (max. line pull 11,280 lbs (5116,5 kg)), round downhaul weight with swivel, boom sheave case assembly, winch drum rotation indicator and last layer ,
Wide aluminum flat decking for 102" wide rear axle trucks, Auxiliary access step, Aluminum platform mounted behind cab, Arctic Fox hydraulic tank heater - NBT50/60 Series. Runs off crane heater
2017 Peterbilt Model 567 SFFA Conventional Cab Chassis,GCW 86000 (lbs) Front Axle 20000 (lbs) Rear Axle 69000 (lbs), Engine Cummins ISX15 [email protected] [email protected] [email protected]
Transmission - Fuller F016E308LL-VCS Ultrashift, Tires Front 425/65R22.5 Wheels Aluminum, Tires Rear 11R22.5 Wheels Aluminum, Tires Tag and Pushers 245/70R19.5 Wheels Aluminum
acting hydraulic lift cylinder with integral holding valve. (-10o to +75o) Load Moment & Anti-two Block Systems: Graphical color RCL system with audio/visual warning system and control lever lockout. Electronic display of boom angle, boom length, relative load moment indication, rated load, load, radius and boom tip height. External anti-two block
system. Standard WADS (Work Area Definition System) allows operator to pre-select and define safe working areas. When crane approaches set limits, audio/visual warnings alert the operator of the jobsite obstructions. Crane Cab: All steel construction with acoustical lining and tinted glass, deluxe seat with armrest mounted single axis electronic controllers, windshield with electric wiper, sliding skylight with wiper and sunshade, hot water cab heater with defroster (diesel fired with remote diesel tank mounted to cab), circulating
fan, air conditioning, fire extinguisher, dual cab mounted work lights, engine start/stop switches, hour meter (shown on the RCL display) and signal horn. Swing: 360o continuous rotation, planetary Glide Swing with foot actuated multi-disc brake and pinion guard. Counterweight: Hydraulically removable counterweight system. 1,100 lbs (499 kg) counterweight mounted (not needed if auxiliary winch is ordered) Hydraulic System: Pressure compensated, load sense, closed-center hydraulic system with one(1) left-hand rotation, variable displacement piston pump. 100 gal (378,5 L) hydraulic reservoir, external sight level indicator, filter condition indicator, oil temperature gauge and oil cooler with electric fan and butterfly valve on the suction line. Hoist: One(1) main hoist with grooved drum, two-speed power up and down, automatic multi-disc brake, electronic drum rotation indicator (DRI), last layer indicator (LLI), and drum
cable follower. Bare drum maximum pull 15,000 pounds (6.308,8 kg) low speed. Wire Rope: 450 ft (137,2 m) of 5/8 in (16 mm) diameter 35x7 (5:1 design factor) for main hoist. Single line pull 11,280 pounds (5116,5 kg) Hook Block: 20 ton (18,1 mt) 328 pounds (149 kg) single sheave, "Quick Reeve" type block with swivel hook and safety latch. Outriggers: Hydraulic front and rear. Two section extendable beams with integral check valves for 360o operation, 24 in (607 mm) diameter aluminum outrigger floats and three position settings (0%, 50%, and
100%). Controls located in crane cab and both sides of subframe. Outrigger Monitoring System included. Decking/Ladders/Bumpers: Full length aluminum decking , fold down ladder on drivers side that aligns with crane cab and a portable aluminum ladder that stows at the rear of the crane (can be used for crane cab access on passenger side of crane and on the driver and passenger's side over the rear bumper, two(2) mud flaps which attach to truck frame and full width rear bumper which bolts to truck frame. Miscellaneous Standard Equipment:
360o stable, Back-up alarm, outrigger motion alarm, marker and indicator lights, remote control "bump" switch to control main winch and aux winch(as required), two(2) English owner's manuals (1 paper & 1 USB flash drive), and EET included. Standard Paint: Axalta Imron® Elite Productive paint. - "National Platinum" color for turret, crane
cab and base boom section; standard "Black" for torsion box (frame), outriggers and inner boom sections. 26 to 45 ft. (7.9 to 13.7 m) tele Jib, offsettable at 0° and 30° positions
Turret mounted auxiliary winch with grooved drum, two speed power up and down, 15,000 lbs (6.803,8 kg) bare drum pull on low speed. 450 ft (137,1 m) of 5/8 in (16 mm) rotation resistant rope (max. line pull 11,280 lbs (5116,5 kg)), round downhaul weight with swivel, boom sheave case assembly, winch drum rotation indicator and last layer ,
Wide aluminum flat decking for 102" wide rear axle trucks, Auxiliary access step, Aluminum platform mounted behind cab, Arctic Fox hydraulic tank heater - NBT50/60 Series. Runs off crane heater
2017 Peterbilt Model 567 SFFA Conventional Cab Chassis,GCW 86000 (lbs) Front Axle 20000 (lbs) Rear Axle 69000 (lbs), Engine Cummins ISX15 [email protected] [email protected] [email protected]
Transmission - Fuller F016E308LL-VCS Ultrashift, Tires Front 425/65R22.5 Wheels Aluminum, Tires Rear 11R22.5 Wheels Aluminum, Tires Tag and Pushers 245/70R19.5 Wheels Aluminum
Information:
| Year | 2017 |
| Stock Number | 164878NAT16 |
| Lift Capacity | 55 tn |
1