4800CC LIPPMANN Heavy sale in North Dakota

LIPPMANN 4800CC IMPACTOR CRUSHING PLANT EQUIPPED AS PER BELOW:

LIPPMANN 4248 HORIZONTAL SHAFT IMPACTOR:
- CRUSHER HAS 42" DIAMETER BY 48" WIDE ROTOR AND HAS A 34" BY 49" FEED
INLET OPENING
ROTOR ASSEMBLY:
- FABRICATED ROTOR CONSISTING OF SHAFT, LARGE CENTER TUBER, (FOUR) 2
1/2" THICK RIBS, (THREE) BACKING BEAMS AND WELDED RETAINERS
- (THREE) REPLACEABLE WEAR RESISTANT HIGH CHROM HAMMERS, 4" THICK
- (TWELVE) HAMMER SHOE ASSEMBLIES WITH JACKING BOLT FOR SECURE
HAMMERRETENTION
- (TWO) SELF ALIGNIN PILLOW BLOCK BEARINGS
CRUSHER FRAME:
- UPPER AND LOWER CRUSHER FRAMES CONSTRUCTED OF 5/8" PLATE
- REPLACEABLE 1" WEAR RESISTANT ALLOY STEEL FRAME LINERS
- (TWO) CRUSHER OPENING CYLINDERS WITH HYDRAULIC PUMP
-(ONE) SAFETY PIN TO HOLD UPPER FRAME OPEN DURING MAINTENANCE
- ROTOR PIN AND HOLDER TO KEEP ROTOR FROM ROTATING DURING SERVICE
BREAKER PLATES:
- (TWO) ADJUSTABLE BREAKER PLATES TO ACCOMMODATE UNCRUASHABLE
MATERIAL TO ADJUST THE SETTING
- THE LOWER BREAKER PLATE SETTING IS MAINTAINED BY (TWO) HIGH
STRENGTH PRELOADED COIL SPRINGS
- THE WEIGHT OF THE UPPER CURTAIN MAINTAINS THE SETTING
- BREAKER PLATE CURTAINS CONSTRUCTED OF 1" PLATE
- REPLACEABLE 2 1/2" WEAR RESISTANT ALLOY STEEL BREAKER PLATE LINERS
- MONO BLOCK FIRST CURTAIN
SHEAVES:
- STANDARD CRUSHER SHEAVE PROVIDED
- CRUSHER SHEAVE IS STATICALLY BALANCED FOR SMOOTH OPERATION
CRUSHER DRIVE:
- 250 HP ELECTRIC MOTOR, 1200 RPM
FEEDER HOPPER:
- CONSTRUCTEDOF 1/2" HARDOX STEEL PLATES
CRUSHER FEED HOOD:
- CONSTRUCTED OF 1/2" HARDOX STEEL PLATE
- RUBBER BELT CURTAIN REMOVABLE FOR MAINTENANCE
- TO INCLUDE CHAIN CURTAIN
- 1" ROUN ROD FOR EASY CHAIN REPLACEMENT
LIPPMANN-MILWAUKEE HEAVY-DUTY HORIZONTAL VIBRATING GRIZZLY FEEDER 47" WIDE AND
16' LONG:
- 1" THICK STEEL FEEDER PAN, 12' FEET LONG, WITH 1/2" THICK AR STEEL LINERS
ON PAN AND 3/8" THICK AR LINERS ON SIDE PLATES OF FEEDER
- 4' LONG SIZING SECTION WHICH CONSISTS OF ERIN FINGERS WITH 2" NOMINAL
OPENING AND 12" DEFLECTION PLATE TO TRANSER NEAR SIZE ROCK INTO THE
IMPACTOR
FEEDER VIBRATING MECHANISM:
- MODEL LLH-18 WITH TWO FULL-LENGTH, SELF COUNTERWEIGHTED SOLID
STEEL SHAFTS
- HELICAL GEARS
- FOUR (4)90 MM SPHERICAL ROLLER BEARINGS AND AN OIL SPLASH
LUBRICATION SYSTEM
- MECHANISM IS ENCLOSED IN A DUST PROOF HOUSING
- SHEAVES AND BELTS ARE INCLUDED ALONG WITH A 30 HP, NEMA C
HIGH-TORQUE 1800 RPM ELECTRIC MOTOR
- INTEGRATED MOTOR MOUNT
48" X 78" PAN FEEDER UNDER THE IMPACTOR:
- 3/8" FORMED STEEL PAN
- (2) VIBRATING MOTORS 2.4 HP EACH
- 1/2" PAN LINERS
- 3/4" IMPACT ABSORBENT MATERIAL BETWEEN PAN AND LINERS
- MOUNTED ON (4) COIL SPRINGS
- RUBBER FLASHING MOUNTED AROUND THE REAR AND SIDES OF THE FEEDER
TO ELIMINATE SPILLAGE
BYPASS CHUTE:
- 1/4" STEEL PLATE BY-PASS CHUTE
DISCHARGE CONVEYOR:
- 48" X 45' (APPROX) FRONT DISCHARGE CONVEYOR WITH 3 PLY BELTING AND 5"
CEMA C IDLERS
- INCLUDES 20 HP 1800 RPM TEFC ELECTRIC MOTOR
- PLANT HAS A BY-PASS CHUTE UNDER THE GRIZZLY SECTION OF THE FEEDER
- THE CONVEYOR PORTION UNDER THE GRIZZLY BY-PASS CHUTE AND THE
IMPACT CRUSHER INCLUDES IMPACT IDLERS
SELF CLEANING PERMANENT MAGNET:
- MOUNTED CROSS BELT UNDER THE REAR OF THE FEEDER HOPPER
- REVERSIBLE TO DISCHARGE MATERIAL TO EITHER SIDE OF THE PLANT
- LIFTING EYES ON GANTRY
CLOSED CIRCUIT OPTION WITH SCREEN:
- 5' X 10' DD SCREEN
- VIBRATING UNIT WITH (4) 110MM BEARINGS
SIDE DISCHARGE CLOSED CIRCUIT CONVEYORS:
- 24" X 9' (APPROX) SIDE DISCHARGE CONVEYOR WITH 2 PLY BELTING AND 4"
CEMA B IDLERS
- INCLUDES A 5 HP 1800 RPM TEFC ELECTRIC MOTOR
RETURN CLOSED CIRCUIT CONVEYOR:
- 24" X 32' (APPROX) FRONT DISCHARGE COVNEYORWITH 2 PLY BELTING AND 4"
CEMA C ILDERS
- INCLUDES A 7.5 HP 1800 RPM TEFC ELECTRIC MOTOR
TRUCK FRAME WITH KING-PIN AND SUSPENSION:
- HUTCH TRI-AXLE
- QTY (3) 22,500# CAPACITY AXLES - STD SLACK ADJUSTER - NON - SPRING
BRAKES
- TRAILKING FLIP AXLE S/N# 1TKR00510DM031068
- QTY (12) 11.00 X 22.5 RADIAL TIRES MOUNTED ON BUDD TYPE HUB PILOTED
WHEELS ALSO INCLUDES ALL NECESSARY CHUTES AND SUPPORTS, SUPPORT
LEGS, GUARDS FOR V-BELT DRIVES, OPERATORS PLATFORM WITH RAILINGS
AND LADDERS, TAIL LIGHTS, REFLECTORS, DIRECTIONAL SIGNALS
- SIX RUN ON HYDRAULIC LEVELING JACKS, SIX (6) 50,000 LB., 24" STROKE WITH
A 8 HP GAS POWER UNIT
- JIB CRANE OVER IMPACTOR
- INCLUDES TAG AXLE PROVITIONS FOR SINGLE AXLE TAG
- ELONGATED TRUCK FRAME ALLOWING ATLEAST 10' CLEARANCE FROM
KINGPIN TO THE FIRST OBSTRUCTION
ELECTRICAL SWITCHGEAR FOR LIPPMANN 4800CC PLANT EQUIPPED AS FOLLOWS:
- 72 X 72 ENCLOSURE WITH 600 AMP MAIN BREAKER- CORD CAGE, LEG KIT
- 400 HP ALTIVAR 71 SERIES DRIVE WITH EXTERNALLY MOUNTED HEAT SYNC
- CUSTOM WEATHER PROTECTION WITH HOOD FOR VFD COOLING
- 30 HP ABB VFD FOR FEEDER
- (2) 2.4 HP FVNR STARTERS FOR PAN FEEDER
- 7.5 HP FVNR SIRC WITH 20 AMP HUBBELL RECEPTACLE
- 10 HP FVNR SCREEN
- 20 HP FVNR SCREEN FEED
- (2) 5 HP FVNR CROSS CONVEYORS

Year	2016
Location	Fargo, North Dakota
Stock Number	E00047026
Serial Number	2016-0101