2015 ELLIOTT 1870F
Price:USD $140,000
Buy
2015 ELLIOTT 1870F
Used and New
Description:
Capacity: 18.00
Boom/Jib: 120'
Hours: PTO: 352 Engine: 638
Mileage: 6669 as of 1/10/2017
PTO Hours: 352 as of 1/10/2017
Engine Hours: 638 as of 1/10/2017
Front mount sub frame for a 20' bed, 27' retracted - 70' extended 3-section proportional boom, Sheave head equipped with three sheaves, Winch features: Burst of speed 12,800 lb. bare drum pull, 275' of 9'16" diameter 6x37 EIPS wire rope, 9,600 lb. single line pull, Internal boom hard-wired anti-two-block and Load Moment Indicator (LMI), Hydraulic overload protection system, 372 degree non-continuous rotation. Hydraulic system includes: 3-section gear pump (counterclockwise rotation), 70 gallon oil reservoir with sight and temperature gauge, 10 micron return line filter, Single gate valve on suction line. Dual operator control console with platforms: Engine start/stop switch, Independently controlled outrigger and stabilizer levers, Bubble level gauge, Signal horn, Variable speed foot throttle, Lifting capacity chart, range diagram chart, and boom angle indicator, System pressure gauge (roadside), Cup holder, 12V power outlet, Horizontal, removable type boom rest at end of sub frame, Downhaul weight with hook. Maximum tip height of 80', Maximum lifting capacity of 18 US tons at a 5' radius. Electronic throttle interface. Rear bumper with receiver tube, Backup alarm, Safety triangle kit, Unit certified to ANSI B30.5 for Mobile Cranes.
Selected Options:
20' Steel Bed With Grip Deck Coating (1,950 lbs.)
23' to 40' 2-Piece Jib With Manual Extension (Side Stows on Boom) (1,000 lbs.)
"A" frame link type outriggers at crane pedestal with 20'10" spread
"A" frame type rear stabilizers behind rear axle with 10'4" spread
Front Bumper Stabilizer for 360 Degree Area of Operation. (Includes Additional Control Valve)
15-Ton Single Sheave Hook Block for 2/3 Parts of Line (240 lbs.)
2 Person Gravity-Leveled Yoke Mount Steel Basket (36" x 72") (600 lbs.)
4-Function Radio Remote Controls (2-Section Gear Pump in Lieu of 3-Section Pump)
Hot Shift PTO (Required For Automatic Transmission)
2 Steel Underbody Boxes Mounted 48" x 20" x 18" (130 lbs.)
24" High Bulkhead at Front of Bed (125 lbs.)
Fold Down Bed Access Ladder With Grab Handles
Vertical Holder On Bed For 2/3 Part Line Hook Block
Down hall Ball Storage on Boom Rest
Paint Crane Frame, Turret, Boom, and Control Console, Chassis Cab – White
Paint Sub base, Bed, Rear Stabilizers, and Reservoir – Black
Paint Main Outriggers, Operator Platform and Boom Rest - Red
2015 Ford F-750 XL Chassis (3FRXF7FKXFV671158):
260 HP (660 ft/lbs.) Cummins ISB diesel engine
230" WB; 156" CA, 87"
AF Allison 3000 RDS 6-speed automatic transmission
33,000 GVWR, 13,200 lbs. front axle, 21,000 lbs. rear axle
11R22.5 front and rear tires
Disc wheels, Air brakes, Air dryer
(2) front two hooks
Engine block heater
50 gallon fuel tank (LH), 5 gallon Diesel Exhaust Fluid (DEF)
AM/FM stereo, Tinted glass, Air conditioning, Cruise control
Air ride driver/2-man passenger seat
Boom/Jib: 120'
Hours: PTO: 352 Engine: 638
Mileage: 6669 as of 1/10/2017
PTO Hours: 352 as of 1/10/2017
Engine Hours: 638 as of 1/10/2017
Front mount sub frame for a 20' bed, 27' retracted - 70' extended 3-section proportional boom, Sheave head equipped with three sheaves, Winch features: Burst of speed 12,800 lb. bare drum pull, 275' of 9'16" diameter 6x37 EIPS wire rope, 9,600 lb. single line pull, Internal boom hard-wired anti-two-block and Load Moment Indicator (LMI), Hydraulic overload protection system, 372 degree non-continuous rotation. Hydraulic system includes: 3-section gear pump (counterclockwise rotation), 70 gallon oil reservoir with sight and temperature gauge, 10 micron return line filter, Single gate valve on suction line. Dual operator control console with platforms: Engine start/stop switch, Independently controlled outrigger and stabilizer levers, Bubble level gauge, Signal horn, Variable speed foot throttle, Lifting capacity chart, range diagram chart, and boom angle indicator, System pressure gauge (roadside), Cup holder, 12V power outlet, Horizontal, removable type boom rest at end of sub frame, Downhaul weight with hook. Maximum tip height of 80', Maximum lifting capacity of 18 US tons at a 5' radius. Electronic throttle interface. Rear bumper with receiver tube, Backup alarm, Safety triangle kit, Unit certified to ANSI B30.5 for Mobile Cranes.
Selected Options:
20' Steel Bed With Grip Deck Coating (1,950 lbs.)
23' to 40' 2-Piece Jib With Manual Extension (Side Stows on Boom) (1,000 lbs.)
"A" frame link type outriggers at crane pedestal with 20'10" spread
"A" frame type rear stabilizers behind rear axle with 10'4" spread
Front Bumper Stabilizer for 360 Degree Area of Operation. (Includes Additional Control Valve)
15-Ton Single Sheave Hook Block for 2/3 Parts of Line (240 lbs.)
2 Person Gravity-Leveled Yoke Mount Steel Basket (36" x 72") (600 lbs.)
4-Function Radio Remote Controls (2-Section Gear Pump in Lieu of 3-Section Pump)
Hot Shift PTO (Required For Automatic Transmission)
2 Steel Underbody Boxes Mounted 48" x 20" x 18" (130 lbs.)
24" High Bulkhead at Front of Bed (125 lbs.)
Fold Down Bed Access Ladder With Grab Handles
Vertical Holder On Bed For 2/3 Part Line Hook Block
Down hall Ball Storage on Boom Rest
Paint Crane Frame, Turret, Boom, and Control Console, Chassis Cab – White
Paint Sub base, Bed, Rear Stabilizers, and Reservoir – Black
Paint Main Outriggers, Operator Platform and Boom Rest - Red
2015 Ford F-750 XL Chassis (3FRXF7FKXFV671158):
260 HP (660 ft/lbs.) Cummins ISB diesel engine
230" WB; 156" CA, 87"
AF Allison 3000 RDS 6-speed automatic transmission
33,000 GVWR, 13,200 lbs. front axle, 21,000 lbs. rear axle
11R22.5 front and rear tires
Disc wheels, Air brakes, Air dryer
(2) front two hooks
Engine block heater
50 gallon fuel tank (LH), 5 gallon Diesel Exhaust Fluid (DEF)
AM/FM stereo, Tinted glass, Air conditioning, Cruise control
Air ride driver/2-man passenger seat
Information:
| Year | 2015 |
| Serial Number | 5999 |
| Stock Number | 1178 |
2008 ELLIOTT 1870F
Price:USD $84,900
Buy
2008 ELLIOTT 1870F
Used and New
Description:
U10536: Elliot 1870F 18 Ton Crane with jib on 2008 Peterbilt 340 Flatbed –
Elliot 18 ton crane with a jib, two outriggers in the middle, two at the rear and one on the front. This crane is attached to a Peterbilt 340 with a 20′ flatbed. U10536 was part of a rental fleet.
Elliot 18 Ton Crane Quick Facts:
Elliot 1870F Crane
Length: 80′ with a 23′ jib
18 ton capacity
5 outriggers
2008 Peterbilt 340 Flatbed Quick Facts:
Low miles
Fully locking rear differential
Carb Compliant Crane
Heavy Specs
20′ Flatbed
Elliot 18 ton crane with a jib, two outriggers in the middle, two at the rear and one on the front. This crane is attached to a Peterbilt 340 with a 20′ flatbed. U10536 was part of a rental fleet.
Elliot 18 Ton Crane Quick Facts:
Elliot 1870F Crane
Length: 80′ with a 23′ jib
18 ton capacity
5 outriggers
2008 Peterbilt 340 Flatbed Quick Facts:
Low miles
Fully locking rear differential
Carb Compliant Crane
Heavy Specs
20′ Flatbed
Information:
| Year | 2008 |
| Serial Number | GT4430 |
| Stock Number | U10536 |
| Lift Capacity | 36,000 lb |
1