L60R ELLIOTT Heavy sale in United States

2007 ELLIOTT HI-REACH MODEL L60R MOUNTED ON A 2007 INTERNATIONAL 4300 TO BE EQUIPPED WITH THE FOLLOWING OPTIONAL EQUIPMENT:

1EA. 14' STEEL FLOOR BED
1EA. 5,900 LB. PLANETARY WINCH W/ANTI-TWO-BLOCK SWITCH, HORN, TWO PART HOOK & 130' 3/8" CABLE & RETAINER LUG.
1EA. PLATFORM MOUNTED JIB WITH HYD. WINCH DRUM IN FLOOR WITH 500 LB. CAPACITY AND STOWAGE BRACKET ON BED WHEN NOT IN USE.
1EA. 110 VOLT LINE TO PLATFORM
1EA. WELDER LEADS TO PLATFORM
1EA. 98"X36"X24" STEEL CROSS BODY BOX
1EA. STEEL CABLE CARRIER COVER
1EA. CAB WINDSHIELD GUARD
1EA. PAINT HI-REACH UNIT RED. SUBFRAME PAINTED BLACK. O/R'S PAINTED RED.

SERIAL NUMBER: 4114
VIN #: 1HTMMAAN07H441809

Boom Lift Type: Telescopic, Engine Manufacturer: International, Engine Model: DT466, Maximum Horizontal Reach: 57', Outriggers, Platform Length (inches): 54, Platform Width (inches): 30, Power Type: Engine Powered, Turntable Rotation Type: Continuous, Working Height: 62'

Year	2007
Serial Number	4114
Lift Capacity (pounds)	5,900 lb
Drive	2 WD
Horsepower	220

Mounted on an International 4300, Automatic Transmission , 25,124 miles, DT466 Engine, hydraulic brakes, GVWR: 29,000 Lbs, A/C, 62' tip height, 56' side reach. 40″ x 60″ two-man work platform with a 500 lb capacity.

Year	2009
Lift Capacity (pounds)	6,000 lb

NEW ELLIOTT L60R
Standard features:
One new Elliott HiReach L60R having a 62’working height. Basic unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to truck frame, oil, and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. Base mounted “MH” type hydraulically powered, individually controlled rear main outriggers and “A” secondary outriggers behind cab. Steel three section hydraulically telescoping boom with one double acting 6” lift cylinder plus a 3” piggyback extension cylinder. Exposed cable carrier to boom tip. Electronic self-leveling and rotating 40”x60” EZR work platform with remote leveling from platform and aluminum floor. Power take off and pump drive, pressure gauge, pump and holding valves on all cylinders. Remote start/stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher, safety triangle kit, and two body harness and lanyard. LED lights to include all bed marker lights, stop, tail and turn. Installed on chassis, tested, checked and ready to operate. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs.
Additional Options:
• 14’ Steel Bed with LED Lights and Grip Deck Coating
• Standard ICC Rear Bumper with Steps and Grab Handles
• Tie Down Rails on Both Sides of Bed
• Automatic Safety Rotation Lockout – Prevents Boom from Rotating to Side where MH Outriggers are not Fully Extended Horizontally. (“A” Outriggers Remain Fully Extended)
• 5,900 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Two Part Hook & 180’ of 3/8” Cable & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform.
• 110 Volt Line to Platform
• (2) Sign Forks on Platform
• Hot Shift PTO for Automatic Transmission
• 12’6” Steel Bed with LED Lights and Grip Deck Coating
• 98”L x 36” W x 24” H Steel Crossbody Box (Requires 2’ Shorter Bed)
• Steel Cable Carrier Cover
• Cab Windshield Guard and Platform Walkway
• Chassis Rating – 25,999 lb. GVWR Non CDL
• Mounting Bracket Above 8’ Crossbody Box for Customer Installed Welder/Generator (Designed for Miller Bobcat 225)
• Remote Start/Kill Switch in Platform for Customer Installed Welder/Generator
• Welder Lead to Platform – (2) 1 Gauge Cables
• HiReach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red (STD)


MOUNTED ON 2018 FREIGHTLINER M2 106
Mounted on a 2018 Freightliner M2 106 tractor chassis with a Cummins B6.7 240 HP diesel engine, 187” WB, 120” C.A., 100” AF Allison 2500 RDS automatic transmission, 29,000 GVWR, 10,000 lb. front axle, 19,000 lb. rear axle, 11R22.5 front & rear tires, hydraulic brakes, 50 gallon aluminum fuel tank (LH), AM/FM radio, 40/20/40 cruise control, air conditioning, air ride driver seat, two-man passenger bench seat. Color: White

Year	2018
Serial Number	7052
Stock Number	73687

NEW ELLIOTT L60R
Standard features:
One new Elliott HiReach L60R having a 62’working height. Basic unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to truck frame, oil, and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. Base mounted “MH” type hydraulically powered, individually controlled rear main outriggers and “A” secondary outriggers behind cab. Steel three section hydraulically telescoping boom with one double acting 6” lift cylinder plus a 3” piggyback extension cylinder. Exposed cable carrier to boom tip. Electronic self-leveling and rotating 40”x60” EZR work platform with remote leveling from platform and aluminum floor. Power take off and pump drive, pressure gauge, pump and holding valves on all cylinders. Remote start/stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher, safety triangle kit, and two body harness and lanyard. LED lights to include all bed marker lights, stop, tail and turn. Installed on chassis, tested, checked and ready to operate. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs.
Additional Options:
• 14’ Steel Bed with LED Lights and Grip Deck Coating
• Standard ICC Rear Bumper with Steps and Grab Handles
• Tie Down Rails on Both Sides of Bed
• Automatic Safety Rotation Lockout – Prevents Boom from Rotating to Side where MH Outriggers are not Fully Extended Horizontally. (“A” Outriggers Remain Fully Extended)
• 5,900 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Two Part Hook & 180’ of 3/8” Cable & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform.
• 110 Volt Line to Platform
• (2) Sign Forks on Platform
• Hot Shift PTO for Automatic Transmission
• 12’6” Steel Bed with LED Lights and Grip Deck Coating
• 98”L x 36” W x 24” H Steel Crossbody Box (Requires 2’ Shorter Bed)
• Steel Cable Carrier Cover
• Cab Windshield Guard and Platform Walkway
• Chassis Rating – 25,999 lb. GVWR Non CDL
• Mounting Bracket Above 8’ Crossbody Box for Customer Installed Welder/Generator (Designed for Miller Bobcat 225)
• Remote Start/Kill Switch in Platform for Customer Installed Welder/Generator
• Welder Lead to Platform – (2) 1 Gauge Cables
• HiReach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red (STD)


MOUNTED ON 2018 FREIGHTLINER M2 106
Mounted on a 2018 Freightliner M2 106 tractor chassis with a Cummins B6.7 240 HP diesel engine, 187” WB, 120” C.A., 100” AF Allison 2500 RDS automatic transmission, 29,000 GVWR, 10,000 lb. front axle, 19,000 lb. rear axle, 11R22.5 front & rear tires, hydraulic brakes, 50 gallon aluminum fuel tank (LH), AM/FM radio, 40/20/40 cruise control, air conditioning, air ride driver seat, two-man passenger bench seat. Color: White

Year	2018
Serial Number	7045
Stock Number	73686

2006 Elliott L60RMHA
60’ Vertical Reach,
5,900lb capacity main winch
500lb capacity jib winch
Out and down outriggers

2006 International 4300
DT466 Diesel Engine
Eaton Manual Transmission
33,000 GVWR
Approximately 184,000 miles

Year	2004
Serial Number	HS4118