M43R ELLIOTT Heavy sale in United States

Elliott M43R aerial lift equipped as follows:
- 48’ work height
- 36’ side reach
- Continuous rotation
- 30” x 54” platform 500# platform capacity
- 500# platform-mounted hydraulic jib winch
- Electronic proportional controls on platform
- Walkway access to platform when boom stowed
- Out and down outriggers – spread 10’5”
- “A” style secondary outriggers – 8’ spread
- Steel two-section hydraulically telescoping boom
- Holding valve mounted on all cylinders
- 12V emergency pump with switch at upper/lower controls
- Remote start/shutdown at upper and lower controls
- Two body harnesses and lanyards
- 13’ steel bed
- Tie down rails on both sides of bed
- ICC rear bumper underride
- Painted white

2012 Dodge 5500 chassis equipped as follows:
- 19,500# GVW
- 6.7L Cummins Turbo Diesel
- Automatic transmission
- Painted white
- 51,853 miles and 1,200 hours as of August 2017

Year	2012
Stock Number	C-MS

Elliott M43R / SN: 6922
Platform Height: 43′
Working Height: 48′
Maximum Side Reach: 36′
Main Boom Winch Capacity: 2,000 lbs.
30″ x 54″ EZR Removable Platform
Updated Jib Now Stows In Platform
Platform Capacity: 500 lbs.
Platform Jib & Winch Capacity: 500 lbs.
Hydraulic Platform Rotation
110-Volt Circuit To Platform
360-Degree Continuous Boom Rotation
Hydraulic Self Leveling Platform
Hydraulic H-Type Front Outriggers
Hydraulic A-Type Rear Outriggers
Anti-Two-Block System
Upper Controls With Lower Override
Two-Speed Remote Throttle
12-Volt Emergency Pump Assembly

’17 RAM 5500 4×2 / Vin: 3C7WRMCL3HG695758
Cummins 6.7L Diesel Engine (320-HP)
Aisin HD Six-Speed Automatic Transmission
GVWR: 19,500
108″ Cab-To-Axle
4.88 Rear Axle With Limited Slip
Air Conditioning
52-Gallon Rear Fuel Tank
225 / 70R 19.5
HD Vinyl 40 / 20 / 40 Split Bench Seat With Console
Max Tow Package (GCWR: 30,000 lbs)
AM / FM Radio With Bluetooth
Back-Up Camera System
Chrome Appearance Package

Aluminum 13′ Flat Bed With Exterior Tie Down Rail
Miller Bobcat 225NT Welder Generator
PLREI Aluminum Cross Box (24″ x 30″ x 98″)
(2) Aluminum Under Body Tool Boxes (18″ x 18″ x 48″)
(4) Aluminum Under Body Tool Boxes (18″ x 18″ x 30″)
LED Lighting Package (Marker & Tail Lights)
(2) Turret Mounted LED Strobe Lights
(4) Poly Outrigger Pads With Holders
(2) Rubber Wheel Chocks With Holders
Rear ICC Step Bumper
15-Ton Pintle Hook & Safety Chain Eyes
7-Way Trailer Socket

Front Axle: 6,280 lbs.
Rear Axle: 12,100 lbs.
Total: 18,380 lbs.

Boom Lift Type: Telescopic, Working Height: 48, Maximum Horizontal Reach: 36, Platform Length (inches): 54, Platform Width (inches): 30, Turntable Rotation Type: Continuous, Outriggers, Engine Manufacturer: Cummins, Engine Model: 6.7L

Year	2017
Serial Number	6922
Stock Number	RQ653
Lift Capacity (pounds)	2,000 lb
Drive	2 WD
Horsepower	320

NEW ELLIOTT M43R
Standard features:
One new Elliott HiReach M43R having a 48’working height. Basic unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to turret box, oil, and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. Underslung “A” outriggers at rear and overframe vertical outriggers at front. Steel two section hydraulically telescoping boom with double acting lift cylinder. External cable carrier to boom tip. Hydraulically self-leveling and rotating 30’x54” EZR work platform with remote leveling from platform, and aluminum floor. Power take off, pressure gauge, pump and holding valves on all cylinders. Remote start/stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher, and two body harness. Safety triangle kit and lanyard. LED Lights to include All Bed Marker Lights, Stop, Tail and Turn. Installed on chassis, tested, checked and ready to operate. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs.
Additional Options:
• Standard ICC Rear Bumper with Steps and Grab Handles
• Tie Down Rails on Both Sides of Bed
• 2,000 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Cable & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform.
• 110 Volt Line to Platform
• (2) Sign Forks on Platform
• Walkway Access to Platform when Boom Stowed (19,500 GVWR Chassis)
• Hot Shift PTO for Automatic Transmission
• Steel Cable Carrier Cover
• Chassis Rating – 19,500 lb. GVWR Non CDL
• HiReach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red (STD)
• 12’6” Steel Bed with LED Lights and Grip Deck Coating
• 98” x 24” W x 30” H Steel Crossbody Box (Requires 24” Shorter Bed)

MOUNTED ON 2017 DODGE 5500 4x2
Mounted on a 2017 Dodge 5500 4x2 tractor chassis with a Cummins 6.7 L I6 320 HP Turbo diesel engine, 50 state emissions, 6 Speed AS69RC HD Aisin Transmission, 19,500GVWR, 7,250 lb. front axle, 13,500 lb. rear axle, P225/70R19.5F front & rear tires, 4.88 axle ration, anti-spin rear axle, PTO prep, 52 gallon rear fuel tank, Platform running boards, Bright bumper/grille, engine block heater, cruise, air conditioning, AM/FM w/CD with Bluetooth, 40/20/40 vinyl split bench seat, power windows & locks, heated mirrors. Color: White

Year	2017
Serial Number	7025
Stock Number	73685

Elliott M43R / SN: 6705
Platform Height: 43′
Working Height: 48′
Maximum Side Reach: 36′
Main Boom Winch Capacity: 2,000 lbs.
30″ x 54″ EZR Removable Platform
Platform Capacity: 500 lbs.
Platform Jib & Winch Capacity: 500 lbs.
Hydraulic Platform Rotation
110V Circuit To Platform
360-Degree Continuous Boom Rotation
Hydraulic Self Leveling Platform
Hydraulic H-Type Front Outriggers
Hydraulic A-Type Rear Outriggers
Anti-Two-Block System
Upper Controls With Lower Override
Two-Speed Remote Throttle
12-Volt Emergency Pump Assembly

’16 RAM 5500 4×2 / Vin: 3C7WRMCLXGG273601
Cummins 6.7L Diesel Engine (320-HP)
Aisin HD Six-Speed Automatic Transmission
GVWR: 19,500
108″ Cab-To-Axle
4.88 Rear Axle With Limited Slip
Air Conditioning
52-Gallon Rear Fuel Tank
225 / 70R 19.5
HD Vinyl 40 / 20 / 40 Split Bench Seat With Console
AM / FM Radio
Power Windows, Door Locks & Remote Keyless Entry

Steel 13′ Flat Bed With Treadplate Walking Surface
PLREI Aluminum Cross Box (18″ x 18″ x 98″)
LED Lighting Package (Marker & Tail Lights)
(2) Turret Mounted LED Strobe Lights
(4) Poly Outrigger Pads With Holders
(2) Rubber Wheel Chocks With Holders
Rear ICC Step Bumper
15-Ton Pintle Hook & Safety Chain Eyes
7-Way Trailer Socket

Front Axle: 6,020 lbs.
Rear Axle: 12,120 lbs.
Total: 18,140 lbs.

Year	2016
Serial Number	3C7WRMCLXGG273601
Stock Number	RQ631

NEW ELLIOTT M43R
Standard features:
Our new Elliott HiReach M43R having a 48’ working height. Basic unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to turret box, oil and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. Underslung “A” outriggers at rear and overframe vertical outriggers at front. Steel two section hydraulically telescoping boom with double acting lift cylinder. External cable carrier to boom tip. Hydraulically self-levelling and rotating 30” x54” EZR work platform with remote levelling from platform, and aluminum floor. Power take off, pressure gauge, pump and holding valves on all cylinders. Remote start/stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher and two body harness, Safety triangle kit and lanyard. LED light to include all Bed Marker Lights, Stop, Tail and Turn. Installed on chassis, tested, checked and ready to operate. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs.
Additional Options:
• 13’ steel bed with LED lights and Grip Deck Coating
• Standard ICC Rear Bumper with Steps and Grab Handles
• Tie Down Rails on Both Sides of Bed
• 2,000 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Cable & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform
• 110 Volt Line to Platform
• (2) Sign Forks on Platform
• Walkway Access to Platform When Boom Stowed (19,500 GVWR Chassis)
• Hot Shift PTO for Automatic Transmission
• 98” x 18” x 18” Steel Crossbody Box (Requires 18” Shorter Bed)
• Steel Cable Carrier Cover
• Chassis Rating - 19,500 lb. GVWR Non CDL
• HiReach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red

MOUNTED ON 2017 FORD F-550 XL 4X2
300 HP 6.7L V8 Turbo Diesel Engine, 50 state emiss, 193” WB, 108” CA Torqshift 6-speed automatic transmission, 19,500 GVWR, 7,000 lb. front axle, 14,706 lb. rear axle, P225/70R 19.5G A/S front and rear tires, 4.88 axle ratio, anti-spin rear axle, PTO prep, 40 gallon rear fuel tank, platform running boards, engine block heater, cruise control, air conditioning, AM/FM/CD with Bluetooth, 40/20/40 vinyl split bench seat, power windows & locks. Color: White.

Year	2017
Serial Number	6921
Stock Number	71466