NBT55 NATIONAL Heavy sale in United States

Jib,40-ton, 3-sheave block, A/C in operators cab, Headache ball, Aux winch,Mounted on 2015 Kenworth T800 twin steer, tandem rear. 15L cummins engine, Ultrashift plus transmission

Year	2015
Hours	1,655
Lift Capacity	55 tn

2012 NBT55 Cranes - Boom Truck , Swing Cab Controls 128' 5-Section Boom Two Section Jib 26' - 45' Offsetting 30 Degrees Dual Hoists Out & Down Outriggers Aluminum Outrigger Pads Wood Cribbing Pads 360 Degree Stable Diamond Plate Aluminum Platform 5' x 2' Toolbox 3-Sheave Hook Block Headache Ball Diesel Cab Heat & A/C 2012 Pete 367 116,802 Miles 470 HP Engine New Batteries 8LL Transmission Air Brakes 90 Gallon Fuel Tank Driver Side 125 Gallon Fuel Tank Passenger Side 297 WB 77K GVW Air Ride Driver's Seat Power Windows & Locks

Year	2012
Lift Capacity	55 lb

National Crane 55 ton (49,9 mt) capacity, 360o stable standard configuration, two(2) 3,000 lbs (1.360 kg) hydraulically removable counterweight slabs, with a five(5) section, 32- 128 ft (9,5 - 39 m) four plate, full power boom Boom: Full power telescoping cylinder with integral holding valve. Three (3) quick reeve cast iron sheaves. Boom Elevation: One(1) double
acting hydraulic lift cylinder with integral holding valve. (-10o to +75o) Load Moment & Anti-two Block Systems: Graphical color RCL system with audio/visual warning system and control lever lockout. Electronic display of boom angle, boom length, relative load moment indication, rated load, load, radius and boom tip height. External anti-two block
system. Standard WADS (Work Area Definition System) allows operator to pre-select and define safe working areas. When crane approaches set limits, audio/visual warnings alert the operator of the jobsite obstructions. Crane Cab: All steel construction with acoustical lining and tinted glass, deluxe seat with armrest mounted single axis electronic controllers, windshield with electric wiper, sliding skylight with wiper and sunshade, hot water cab heater with defroster (diesel fired with remote diesel tank mounted to cab), circulating
fan, air conditioning, fire extinguisher, dual cab mounted work lights, engine start/stop switches, hour meter (shown on the RCL display) and signal horn. Swing: 360o continuous rotation, planetary Glide Swing with foot actuated multi-disc brake and pinion guard. Counterweight: Hydraulically removable counterweight system. 1,100 lbs (499 kg) counterweight mounted (not needed if auxiliary winch is ordered) Hydraulic System: Pressure compensated, load sense, closed-center hydraulic system with one(1) left-hand rotation, variable displacement piston pump. 100 gal (378,5 L) hydraulic reservoir, external sight level indicator, filter condition indicator, oil temperature gauge and oil cooler with electric fan and butterfly valve on the suction line. Hoist: One(1) main hoist with grooved drum, two-speed power up and down, automatic multi-disc brake, electronic drum rotation indicator (DRI), last layer indicator (LLI), and drum
cable follower. Bare drum maximum pull 15,000 pounds (6.308,8 kg) low speed. Wire Rope: 450 ft (137,2 m) of 5/8 in (16 mm) diameter 35x7 (5:1 design factor) for main hoist. Single line pull 11,280 pounds (5116,5 kg) Hook Block: 20 ton (18,1 mt) 328 pounds (149 kg) single sheave, "Quick Reeve" type block with swivel hook and safety latch. Outriggers: Hydraulic front and rear. Two section extendable beams with integral check valves for 360o operation, 24 in (607 mm) diameter aluminum outrigger floats and three position settings (0%, 50%, and
100%). Controls located in crane cab and both sides of subframe. Outrigger Monitoring System included. Decking/Ladders/Bumpers: Full length aluminum decking , fold down ladder on drivers side that aligns with crane cab and a portable aluminum ladder that stows at the rear of the crane (can be used for crane cab access on passenger side of crane and on the driver and passenger's side over the rear bumper, two(2) mud flaps which attach to truck frame and full width rear bumper which bolts to truck frame. Miscellaneous Standard Equipment:
360o stable, Back-up alarm, outrigger motion alarm, marker and indicator lights, remote control "bump" switch to control main winch and aux winch(as required), two(2) English owner's manuals (1 paper & 1 USB flash drive), and EET included. Standard Paint: Axalta Imron® Elite Productive paint. - "National Platinum" color for turret, crane
cab and base boom section; standard "Black" for torsion box (frame), outriggers and inner boom sections. 26 to 45 ft. (7.9 to 13.7 m) tele Jib, offsettable at 0° and 30° positions
Turret mounted auxiliary winch with grooved drum, two speed power up and down, 15,000 lbs (6.803,8 kg) bare drum pull on low speed. 450 ft (137,1 m) of 5/8 in (16 mm) rotation resistant rope (max. line pull 11,280 lbs (5116,5 kg)), round downhaul weight with swivel, boom sheave case assembly, winch drum rotation indicator and last layer ,
Wide aluminum flat decking for 102" wide rear axle trucks, Auxiliary access step, Aluminum platform mounted behind cab, Arctic Fox hydraulic tank heater - NBT50/60 Series. Runs off crane heater

2017 Peterbilt Model 567 SFFA Conventional Cab Chassis,GCW 86000 (lbs) Front Axle 20000 (lbs) Rear Axle 69000 (lbs), Engine Cummins ISX15 [email protected] [email protected] [email protected]
Transmission - Fuller F016E308LL-VCS Ultrashift, Tires Front 425/65R22.5 Wheels Aluminum, Tires Rear 11R22.5 Wheels Aluminum, Tires Tag and Pushers 245/70R19.5 Wheels Aluminum

Year	2017
Stock Number	164878NAT16
Lift Capacity	55 tn

2016 Peterbilt 367 National NBT55128 Crane w/128' 5 section boom, split removable counterweight, dual 15000# winches, enclosed operators cab w/diesel fuel heater & A/C, cab mounted work lights, 1-sheave load block (for 2-3 part line), 3-sheave load block (for 4-6 part line)and load ball/hook (for single line) aux. winch, 26'-45' 2 pc offsettable jib, 2 man(yoke style)platform, 6-function radio remote controls, dual axis joystick controls. Truck has 2471 miles on it. It is like new and ready to work.

Year	2016
Serial Number	299646
Lift Capacity	110,000 lb
Hours	226
Horsepower	450

National NBT55128, 55 USt, Swing Seat Crane, 128' Main Boom, 26'- 45' offset Jib, Heat & A/C in Operators cab, Mounted on a 2012 Peterbilt 367, Cummins ISX15/485HP, 10 Speed, A/C, Stereo, P/W, P/L, Tilt, Cruise, Jake Brake, 1 Tag & 2 Pusher Air Lift Axles, Federal Bridge Law Legal, 7 Axle Chassis, 4192 Hours on Crane, 72,972 Miles and 8522 Hours on Peterbilt, and Much More

Year	2012
Serial Number	297139
Lift Capacity	110,000 lb
Hours	4,192
Horsepower	485